Fibreglass laminating

Process of applying multiple layers of fiberglass, a strong lightweight plastic reinforced with glass fibre woven into mats, using various techniques such as applying pressure or adhesives, welding or heating in order to provide strength and stability to the composite material. The fibreglass can also be sprayed in liquid form onto products.

fibreglass coating
fiberglass laminating
fibre-glass laminating

knowledge

cross-sector

Fibreglass laminating is an essential knowledge of the following occupations:

Fiberglass laminator: Fiberglass laminators mould fiberglass materials to form hulls and boat decks. They read blueprints and use hand and power tools to cut the composite materials. They apply waxes and lacquers, and prepare surfaces for the placement of fiberglass mats. They use resin-saturated fiberglass to bond wood reinforcing strips to cabin structures and decks. They also prepare materials exposing those to the right temperature. They check finished products for defects and make sure they comply with the specifications.

Fibreglass machine operator: Fibreglass machine operators control and maintain the machine that sprays a mix of resin and glass fibers onto products such as bathtubs or boat hulls to obtain strong and lightweight composite end-products.

Fibreglass laminating is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Insulating tube winder: Insulating tube winders set up and operate a machine to wind up insulating tubes and cut them to specified dimensions.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Transport equipment painter: Transport equipment painters use painting machines and hand tools to coat individual parts and to paint the surface of all types of transport equipment such as cars, buses, boats, aircraft, motorcycles and railway cars. They prepare the surface of the pieces for the paint and apply the coaat. Transport equipment painters can perform industrial painting or individual customisation. They may also remove or repair painting errors such as scratches.
 
Furniture finisher: Furniture finishers treat the surface of wood furniture using hand and power tools to sand, clean and polish. They apply wood coatings onto wooden surfaces by using different techniques such as brushing or using a spray gun. They choose and apply the right coatings with protective and/or decorative purposes.

References

1. Fibreglass laminating – ESCO