Form moulding mixture

Form the moulding mixture adding specified amounts of materials, such as sand, clay, silica mud or plastic pellets, according to a fixed recipe, set up the controller of the melting tanks and monitor the melting process.

form molding mixture
forming moulding mixture
create molding mixture
forming molding mixture
molding mixture creating
creating molding mixture
moulding mixture creating
creating moulding mixture
molding mixture forming
create moulding mixture
moulding mixture forming

skill/competence

sector-specific

Form moulding mixture is an essential skill of the following occupations:

Form moulding mixture is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Hand brick moulder: Hand brick moulders create unique bricks, pipes, and other heat-resistant products using hand moulding tools. They create moulds according to specifications, clean and oil them, insert and remove the mixture from the mould. Then, they let the bricks dry in kiln before finishing and smoothing the end products.
Drawing kiln operator: Drawing kiln operators are responsible for continuous sheet flat glass production by manipulating the drawing kiln that processes molten glass.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Fibreglass machine operator: Fibreglass machine operators control and maintain the machine that sprays a mix of resin and glass fibers onto products such as bathtubs or boat hulls to obtain strong and lightweight composite end-products.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Production potter: Production potters process and form clay, by hand or by using the wheel, into end-products pottery, stoneware products, earthenware products and porcelain. They introduce the already shaped clay into kilns, heating them at a high temperature in order to remove all the water from the clay.
Glass forming machine operator: Glass forming machine operators operate and maintain machines that press or blow molten glass in moulds to form or shape products, such as neons, bottles, jars and drinking glasses. They set up and adjust machines, and weigh, measure and check production samples to check conformity to the set specifications.

References

1. Form moulding mixture – ESCO