Manufacturing of cutlery

The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.

assembling of eating utensils
building of eating utensils
assembling of cutlery
construction of eating utensils
construction of cutlery
making of cutlery
eating utensils production
cutlery production

knowledge

sector-specific

Manufacturing of cutlery is an essential knowledge of the following occupations:

Manufacturing of cutlery is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Engraving machine operator: Engraving machine operators set up, programme, and tend engraving machines designed to precisely carve a design in the surface of a metal workpiece by a diamond stylus on the mechanical cutting machine that creates small, separate printing dots existing from cut cells. They read engraving machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the precise engraving controls, such as the depth of the incisions and the engraving speed.
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Tumbling machine operator: Tumbling machine operators set up and operate tumbling machines, often wet or drie tumbling barrels, designed to remove excess material and burrs of heavy metal workpieces and precious metals and to improve surface appearance, by rotating the metal pieces in a barrel together with grit and potentially water, allowing for the friction between the pieces mutually and with the grit to cause a rounding, smooth effect.
Water jet cutter operator: Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or an abrasive substance mixed with water.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Surface grinding machine operator: Surface grinding machine operators set up and tend surface grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by an abrasive grinding wheel, or wash grinder, rotating on a horizontal or vertical axis.
Cylindrical grinder operator: Cylindrical grinding operators set up and tend cylindrical grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by multiple abrasive grinding wheels with diamond teeth as a cutting device for very precise and light cuts, as the workpiece is fed past it and formed into a cylinder.
Filing machine operator: Filing machine operators set up and tend filing machines such as band files, reciprocating files and bench filing machines in order to smoothen metal, wood or plastic surfaces by precisely cutting and removing small amounts of excess material.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Lathe and turning machine operator: Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved by computer-controlled motors. They read lathe and turning machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the lathe controls, such as the depth of cuts and the rotation speed.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Laser marking machine operator: Laser marking machine operators set up and tend laser marking or engraving machines designed to precisely carve a design in the surface of a metal workpiece by use of a moving controller and an engraving laser beam point attached to it that traces patterns on the metal workpiece’s surface. They make adjustments to the machine in terms of laser beam intensity, direction and speed of movement. They also ensure the laser table, used to perform laser machine engravings on and guides the laser beam, is properly set up.
Lacquer spray gun operator: Lacquer spray gun operators operate lacquer spray guns designed to provide otherwise finished metal, wooden or plastic workpieces with a hard, durable finishing coat, through lacquer coating or paint that is either matte, sheen or highly glossy, but is always meant for hard surfaces.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Metal engraver: Metal engravers make incisions of a design onto a metal surface by carving grooves into it, usually for decorative purposes, including metal weaponry. To cut the design into the surface they use tools such as gravers or burins.

 
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Straightening machine operator: Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle and the height of the straightening rolls and select the settings for the pressing force required to straighten the workpiece, taking into account the end product’s yield strenght and size, without excess work hardening.
Electroplating machine operator: Electroplating machine operators set up and tend electroplating machines designed to finish and coat the metal workpieces’ (such as future pennies and jewelry) surface by using electric current to dissolve metal cations and to bond a thin layer of another metal, such as zinc, copper or silver, to produce a coherent metal coating to the workpiece’s surface.
Laser cutting machine operator: Laser cutting machine operators set up, program and tend laser cutting machines, designed to cut, or rather burn off and melt, excess material from a metal workpiece by directing a computer-motion-controlled powerful laser beam through laser optics. They read laser cutting machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the intensity of the laser beam and its positioning.
Ornamental metal worker: Ornamental metal workers use finishing equipment and machinery to shape and finish fabricated ornamental metal workpieces, often used for the installation process in construction, such as railings, staircases, open steel flooring, fences and gates, and others.
Laser beam welder: Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat source that allows for precise welding.
Dip tank operator: Dip tank operators set up and tend dip tanks, which are coating machines, designed to provide otherwise finished work pieces with durable coating by dipping them in a tank of a specific sort of paint, preservative or molten zinc.
Metal polisher: Metal polishers use metal working equipment and machinery to polish and buff almost finished metal workpieces in order to enhance their smoothness and appearance and to remove oxidisation, tarnishing the metal after the other fabrication processes. They may operate equipment using diamond solutions, silicon-made polishing pads, or working wheels with a leather polishing strop, and tend to these materials ensuring their effectiveness.
Swaging machine operator: Swaging machine operators set up and tend rotary swaging machines, designed to alter round ferrous and non-ferrous metal workpieces into their desired shape by first hammering them into a smaller diameter through the compressive force of two or more dies and then tagging them using a rotary swager, a process through which no excess material is lost.
Anodising machine operator: Anodising machine operators set up and tend anodising machines designed to provide otherwise finished metal workpieces, usually aluminum-based, with a durable, anodic oxide, corrosion-resistant finishing coat, by a electrolyctic passiviation process that increases the thickness of the natural oxide layer of the metal workpieces’ surface.
Punch press operator: Punch press operators set up and tend punch presses designed to cut workpieces into their desired shape by propelling a hydraulic ram to punch holes into them with a single die set that pushes through the top dead centre, through the surface, and to the bottom dead centre of the workpiece.

References

1. Manufacturing of cutlery – ESCO