Mark a metal workpiece using punch

Handle and operate a punch and hammer to mark a metal work piece, for example for the purpose of carving a serial number, or for drilling to mark the exact place where a the hole should be places in order to keep the drill steady.

imprint a metal workpiece using punch
handle a metal workpiece using punch
hammer a metal workpiece using punch
handle a CNC press using force
mark a metal work piece using punch
handle a metal punch and hammer
fashion a CNC press using force
hammer a CNC press using force
imprint a CNC press using force
fashion a metal workpiece using punch

skill/competence

cross-sector

Mark a metal workpiece using punch is an essential skill of the following occupations:

Ornamental metal worker: Ornamental metal workers use finishing equipment and machinery to shape and finish fabricated ornamental metal workpieces, often used for the installation process in construction, such as railings, staircases, open steel flooring, fences and gates, and others.

Mark a metal workpiece using punch is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Coquille casting worker: Coquille casting workers manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into coquilles, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.
Sheet metal worker: Sheet metal workers in construction use sheet metal to construct roofs, ducts for heating, ventilation and air-conditioning, gutters and other metal structures. They read plans and determine the type and amount of materials to be used, then measure, bend, cut, shape, and attach pieces of sheet metal to create the required structure.
Metal annealer: Metal annealers operate electric or gas kilns to soften metal so it can be cut and shaped more easily. They heat the metal to a specific temperature and / or colour and then slowly cool it, both according to specifications. Metal annealers inspect the metals through the entire process to observe any flaws.
Drill press operator: Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Foundry operative: Foundry operative manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into moulds, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.

References

1. Mark a metal workpiece using punch – ESCO