Perform product testing

Test processed workpieces or products for basic faults.

execute product testing
undertake product testing
implement product testing
execute inspection of finished products
complete product testing
undertake inspection of finished products
complete inspection of finished products
implement inspection of finished products

skill/competence

cross-sector

Perform product testing is an essential skill of the following occupations:

Pharmaceutical quality specialist: Pharmaceutical quality specialists perform inspections and precision measurements in order to test and ensure the quality of pharmaceutical products. They are involved in the whole development phase of a pharmaceutical product until it is ready for the market. This includes the process of acquiring clinical trial licences, advising the pharmaceutical development staff on regulatory requirements and evaluating the content of the package leaflet and other documentation on the product. Moreover, pharmaceutical quality specialists collect and evaluate information on side effects of the product and communicate this knowledge both internally and to the relevant authorities.
Clock and watchmaker: Clock and watchmakers make mechanical or electronic clocks and watches. They use precision hand tools or automated machinery to assemble the timing devices. Clock and watchmakers may also repair clocks or watches. They can work in workshops or in factories.
Ammunition assembler: Ammunition assemblers put together explosives and other ammunition components. They perform this work in mass production in ammunition factories. The production itself focuses on the manufacturing of cartridges or projectiles.
Chemical engineering technician: Chemical engineering technicians transform raw materials in order to develop and test chemical products. They also work on improving chemical plant operations and processes.
Battery test technician: Battery test technicians use positive and negative wired plugs to test battery’s resistance capacity. They also test rejected batteries to determine their flaws.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Chemical manufacturing quality technician: Chemical manufacturing quality technicians perform inspections and precision measurements in order to test and ensure the quality of products, by using computer controlled machinery and systems.
Tool and die maker: Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce these tools in all steps of the production process. They design the tools and dies, then cut and shape them to size and finish them by manually operated machine tools, power tools, hand tools, or programming and tending CNC tool and die making machines.

Perform product testing is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Product development manager: Product development managers coordinate the development of new products from beginning to end. They receive briefings and start envisioning the new product considering design, technical and cost criteria. They conduct research on market needs and create prototypes of new products for untapped market opportunities. Product development managers also improve and boost technological quality.
Hand brick moulder: Hand brick moulders create unique bricks, pipes, and other heat-resistant products using hand moulding tools. They create moulds according to specifications, clean and oil them, insert and remove the mixture from the mould. Then, they let the bricks dry in kiln before finishing and smoothing the end products.
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Solderer: Solderers operate various equipment and machinery such as gas torches, soldering irons, welding machines, or electric-ultrasonic equipment in order to solder together two or more items (usually metals), by melting and forming a metal filler in between the joints, the filler metal has a lower melting point than the adjoining metal. 
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Metal furniture machine operator: Metal furniture machine operators use machines and power tools to cut, shape and join metal pieces in order to produce metal furniture ranging from office furnishings to outdoors fittings. They use different types of metal such as aluminium, iron and stainless steel, and different types of processes such as metal forming and casting. They polish, apply protective layers and, in some cases, decorative finishes to the metal pieces. They assemble and join the elements to obtain the final product.
Lacquer maker: Lacquer makers operate and maintain laquers and syntetic paints mixers and jar mills, making sure the end product is according to formula.
Asphalt plant operator: Asphalt plant operators extract raw materials such as sand and stones and operate mobile equipment for their transport to the plant. They tend automated machines to crush and sort out stones, and to mix the sand and stones with asphalt cement. They take samples to check the quality of the mix and arrange for its transport to the construction site.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Glass polisher: Glass polishers finish plate glass to make a variety of glass products. They polish the edges of the glass using grinding and polishing wheels, and spray solutions on glass or operate vacuum coating machines to provide a mirrored surface.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Oxy fuel burning machine operator: Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece’s created kerf as slag.
Boilermaker: Boilermakers operate a variety of equipment and machinery to create, repipe and retube hot water and steam boilers, producing them in all steps of the production process. They cut, gouge and shape the metal sheets and tubes for the boilers to size, using oxy-acetylene gas torches, assemble them by shielded metal arc welding, gas metal arc welding or gas tungsten arc welding, and finish them by the approprate machine tools, power tools and coating.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Brazier: Braziers operate various equipment and machinery such as torches, soldering irons, fluxes and welding machines in order to join two metal pieces together, by heating, melting and forming a metal filler inbetween them, often brass or copper. Brazing can join metals such as aluminum, silver, copper, gold, and nickel. Brazing is a similar process to soldering but requires higher temperatures. 

 
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Vacuum forming machine operator: Vacuum forming machine operators tend, control, and maintain machines that heat sheets of plastic before moving them around a mould, using vacuum-suction; when these sheets become cool, they are permanently set in the shape of the mould.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Thread rolling machine operator: Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die against metal blank rods, creating a larger diameter than those of the original blank workpieces.
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Wood boring machine operator: Wood boring machine operators use milling machines or specialise boring jigs to cut holes in wood workpieces. Wood boring differs from routing mainly in that the main movement is into the workpiece as opposed to across its surface.
Plastic furniture machine operator: Plastic furniture machine operators tend plastic processing machines that produce pieces such as plastic chairs and tables. They inspect each resulting product, detect abnormalities and remove inadequate pieces. In some cases, they may assemble different plastic parts to obtain the final product.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Quality engineering technician: Quality engineering technicians work with quality engineers or managers to analyse and solve quality problems and improve productivity. They examine machines for imperfections and inspect products to make sure they meet the standards. They also provide personnel with training in inspection techniques and prepare inspection plans.
Product manager: Product development managers are responsible for managing the lifecycle of a product. They research and develop new products in addition to managing existing ones through market research and strategic planning. Product managers perform marketing and planning activities to increase profits.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Drill press operator: Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Rubber products machine operator: Rubber products machine operators operate machines which knead, blend, calender, mould, extrude and cure rubber products from natural and synthetic rubber. They measure the ingredients for mixing and load them into the machine. Rubber products machine operators monitor and control the tempature, pressure and speed during production.
Pultrusion machine operator: Pultrusion Machine Operators tend, control, and maintain machines which enable the production of composite materials with consistent cross-sections by adding reinforcement fibres such as fibreglass to the existing material and coating the resulting material with resin; this then is pulled through a heated dye where it becomes cured.
Spring maker: Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring.
Varnish maker: Varnish makers operate equipment and mixers for varnish production, by melting, mixing and cooking the required chemical ingredients, according to specifications.
Localiser: Localisers translate and adapt texts to the language and culture of a specific target audience. They convert standard translation into locally understandable texts with flairs of the culture, sayings, and other nuances that make the translation richer and more meaningful for a cultural target group than it was before.
Glass forming machine operator: Glass forming machine operators operate and maintain machines that press or blow molten glass in moulds to form or shape products, such as neons, bottles, jars and drinking glasses. They set up and adjust machines, and weigh, measure and check production samples to check conformity to the set specifications.

References

1. Perform product testing – ESCO