Prepare workpieces for etching

Prepare mechanical tools and work pieces for etching by polishing their surface and bevelling the work piece to remove sharp edges. Polishing is done using different sandpapers and sand films which are applied and vary from rough to very fine ones.

prepare workpieces to etch
set up mechanical tools to be used for etching
polish tools used for etching
prepare etching workpieces

skill/competence

sector-specific

Prepare workpieces for etching is an essential skill of the following occupations:

Jewellery engraver: Jewellery engravers engrave lettering and ornamental designs onto jewellery articles, using engravers handtools. They sketch and lay out the lettering and designs on the article, cut the design in the article and clean it up.
Stone engraver: Stone engravers use hand tools, machines and chemical products to etch and carve patterns and inscriptions on stone surfaces.
Printmaker: Printmakers engrave or etch metal, wood, rubber or other materials to create images which are transported onto surfaces, generally using a printing press. Printmakers often use tools such as etcher-circuit processors, pantograph engravers, and silk screen etchers.

Prepare workpieces for etching is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Glass engraver: Glass engravers engrave lettering and ornamental designs onto glass articles, using engravers hand tools. They sketch and lay out the lettering and designs on the article, cut the design in the article and finish it.
Metal engraver: Metal engravers make incisions of a design onto a metal surface by carving grooves into it, usually for decorative purposes, including metal weaponry. To cut the design into the surface they use tools such as gravers or burins.

 
Optical disc moulding machine operator: Optical disc moulding machine operators tend moulding machines that melts polycarbonate pellets and inject the plastic into a mould cavity. The plastic is then cooled and solidifies, bearing the marks that can be digitally read.
Woodcarver: Woodcarvers manually shape wood into the desired shape using equipment like knives, gouges and chisels. Woodcarvers produce wooden products to serve as decoration, to be integrated into a composite product, as utensils or as toys.

References

1. Prepare workpieces for etching – ESCO