Construct moulds

Construct moulds for the casting of objects in plaster, clay, glass, plastic or metal. Use casting machines and materials such as rubber, plaster or fibreglass.

mould construction
making moulds
making of molds
mould making
mold construction
constructing of molds
construction of molds
mold making
make moulds
making molds
making of moulds
constructing of moulds
constructing molds
construction of moulds
construct molds
make molds
constructing moulds

skill/competence

cross-sector

Construct moulds is an essential skill of the following occupations:

Moulding machine operator: Moulding machine operators operate machines that are part of the production process of moulds for the manufacturing of castings or other moulded materials. They tend the mouldmaking machines that use the appropriate materials such as sand, plastics, or ceramics to obtain the moulding material. They may then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of moulded products such as ferrous and non-ferrous metal castings.
Mouldmaker: Mouldmakers manually create moulds for the production of metal products. They mix sand and hardening materials to obtain a specialised mixture. They then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of ferrous and non-ferrous metal castings.
Doll maker: Doll makers design, create and repair dolls using various materials such as porcelain, wood or plastic. They build moulds of forms and attach parts using adhesives and handtools.
Foundry operative: Foundry operative manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into moulds, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.
Candle maker: Candle makers mold candles, place the wick in the middle of the mold and fill the mold with wax, by hand or machine. They remove the candle from the mold, scrape off excess wax and inspect the candle for any deformities.

Construct moulds is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Hand brick moulder: Hand brick moulders create unique bricks, pipes, and other heat-resistant products using hand moulding tools. They create moulds according to specifications, clean and oil them, insert and remove the mixture from the mould. Then, they let the bricks dry in kiln before finishing and smoothing the end products.
Medical device assembler: Medical device assemblers manufacture instruments, machines and appliances that can be used to prevent, diagnose or treat medical conditions. Medical devices can be non-electrical, such as tubes, needles, drainage sets and sterile pipettes, as well as electrical, such as pacemakers, MRI machines, and X-ray devices. Some may also work in the production of medical furniture such as hospital beds and operation tables.
Fiberglass laminator: Fiberglass laminators mould fiberglass materials to form hulls and boat decks. They read blueprints and use hand and power tools to cut the composite materials. They apply waxes and lacquers, and prepare surfaces for the placement of fiberglass mats. They use resin-saturated fiberglass to bond wood reinforcing strips to cabin structures and decks. They also prepare materials exposing those to the right temperature. They check finished products for defects and make sure they comply with the specifications.

Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Plastic furniture machine operator: Plastic furniture machine operators tend plastic processing machines that produce pieces such as plastic chairs and tables. They inspect each resulting product, detect abnormalities and remove inadequate pieces. In some cases, they may assemble different plastic parts to obtain the final product.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Glass forming machine operator: Glass forming machine operators operate and maintain machines that press or blow molten glass in moulds to form or shape products, such as neons, bottles, jars and drinking glasses. They set up and adjust machines, and weigh, measure and check production samples to check conformity to the set specifications.
Compression moulding machine operator: Compression moulding machine operators set up and operate machines to mould plastic products, according to requirements. They select and install dies on press. Compression moulding machine operators weigh the amount of premixed compound needed and pour it into the die well. They regulate the temperature of dies.

References

1. Construct moulds – ESCO