Natural gas

Description

The various facets of natural gas: its extraction, processing, constituents, uses, environmental factors, etc.

Alternative labels

production of natural gas
extraction of natural gas
facets of natural gas
NG
ng
extraction of natural gases
natural gas facets
natural gases
characteristics of natural gas
production of natural gases
characteristics of natural gases

Skill type

knowledge

Skill reusability level

sector-specific

Relationships with occupations

Essential knowledge

Natural gas is an essential knowledge of the following occupations:

Oil and gas production manager: Oil and gas production managers coordinate and implement short and medium term oil and gas production schedules and plans, such as drilling, extraction operations and waste management. They steer one or more units and oversee the implementation of technical and human means, within the framework of objectives of volume, quality and planning. Oil and gas production managers design and ensure that the production plans and schedules are met.
Gas processing plant control room operator: Gas processing control room operators perform a range of tasks from the control room of a processing plant. They monitor the processes through electronic representations shown on monitors, dials, and lights. They make changes to variables and communicate with other departments to make sure processes keep running smoothly and according to established procedures. They take appropriate actions in case of irregularities or emergencies.
Liquid fuel engineer: Liquid fuel engineers evaluate liquid fuel extraction sites. They design and develop methods for extracting liquid fuels from underneath the earth’s surface, these fuels include petroleums, natural gas, liquefied petroleum gas, non-petroleum fossil fuels, biodiesel and alcohols. They maximise the recovery of hydrocarbon at a minimum cost, pursuing minimal impact on the environment.
Biogas technician: Biogas technicians work in the derivation of gas from organic matter and produced as landfill gas or digested gas. They operate equipment in biogas plants, perform tests and maintenance tasks, and take action in the event of a failure.
Gas distribution engineer: Gas distribution engineers design and construct transport systems for natural gas, connecting the gas distribution network to the consumer by designing piping works and mains. They research methods to ensure sustainability, and to decrease environmental impact, as well as optimising cost efficiency.
Gas production engineer: Gas production engineers develop methods to optimise the extraction and production of gas for energy and utilities. They design systems for gas production, supervise production operations and develop improvements on existing systems.
Gas service technician: Gas service technicians install and maintain gas service appliances and systems in facilities or buildings. They install the equipment in accordance with regulations, repair faults, and investigate leaks and other problems. They test the equipment and advise on the use and care of appliances and systems which use gas energy.
Mud logger: Mud loggers analyse the drilling fluids after they have been drilled up. They analyse the fluids in a laboratory. Mud loggers determine the position of hydrocarbons with respect to depth. They also monitor natural gas and identify lithology.

Optional knowledge

Natural gas is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Fossil-fuel power plant operator: Fossil-fuel power plant operators operate and maintain industrial equipment, such as generators, turbines and boilers, that provides electricity produced from fossil fuels like natural gas or coal. They ensure the safety of operations and that the equipment complies with legislation. They may also work in combined cycle power plants which use heat recovery systems to recover exhaust heat from one operation and activate steam turbines.
Boiler operator: Boiler operators maintain heating systems such as low-pressure boilers, high-pressure boilers and power boilers. They work mostly in large buildings like power plants or boiler rooms and ensure a safe and environmentally friendly operation of boiler systems.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Energy engineer: Energy engineers design new, efficient and clean ways to produce, transform, and distribute energy to improve environmental sustainability and energy efficiency. They extract energy through natural resources, such as oil or gas, or renewable and sustainable sources, such as wind or solar power. 
Gas processing plant supervisor: Gas processing plant supervisors supervise the processing of gas for utility and energy services by controlling compressors and other processing equipment to ensure standard operation. They supervise the maintenance of the equipment, and perform tests to detect problems or deviations, and to ensure quality.
Gas processing plant operator: Gas processing plant operators operate and maintain distribution equipment in a gas distribution plant. They distribute gas to utility facilities or consumers, and ensure the correct pressure is maintained on gas pipelines. They also oversee compliance with scheduling and demand.
Power plant control room operator: Power plant control room operators are responsible for the safe and proper operation of power plants, switchyards and associated control structures. They repair and maintain the involved machinery and equipment to ensure the plant’s efficient operation and to tackle emergency situations such as blackouts.

 


 

References

  1. Natural gas – ESCO

 

Last updated on September 20, 2022