Ensure correct gas pressure

Ensure the necessary, usually constant, pressure of gas which is part of a machine or tool, such as torching equipment, used to process metal workpieces during metal fabrication processes.

establish correct gas pressure
assure correct gas pressure
obtain correct gas pressure
assure constant gas mixture flow
provide constant gas mixture flow
provide correct gas pressure
establish constant gas mixture flow
obtain constant gas mixture flow

skill/competence

cross-sector

Ensure correct gas pressure is an essential skill of the following occupations:

Biogas technician: Biogas technicians work in the derivation of gas from organic matter and produced as landfill gas or digested gas. They operate equipment in biogas plants, perform tests and maintenance tasks, and take action in the event of a failure.
Gas service technician: Gas service technicians install and maintain gas service appliances and systems in facilities or buildings. They install the equipment in accordance with regulations, repair faults, and investigate leaks and other problems. They test the equipment and advise on the use and care of appliances and systems which use gas energy.
Gas processing plant supervisor: Gas processing plant supervisors supervise the processing of gas for utility and energy services by controlling compressors and other processing equipment to ensure standard operation. They supervise the maintenance of the equipment, and perform tests to detect problems or deviations, and to ensure quality.
Gas processing plant operator: Gas processing plant operators operate and maintain distribution equipment in a gas distribution plant. They distribute gas to utility facilities or consumers, and ensure the correct pressure is maintained on gas pipelines. They also oversee compliance with scheduling and demand.
Gas station operator: Gas station operators process gases for compression, transmission or recovery by using gas, steam or electric engine compressors. They perform chemical tests on gases and are responsible for pumps and pipelines operations.

Ensure correct gas pressure is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Welding engineer: Welding engineers research and develop optimal effective welding techniques and design the corresponding, equally efficient equipment to aid in the welding process. They also conduct quality control and evaluate inspection procedures for welding activities. Welding engineers have advanced knowledge and critical understanding of welding technology application. They are able to manage high complex technical and professional activities or projects related to welding applications, while also taking responsibility for the decision making process.
Solderer: Solderers operate various equipment and machinery such as gas torches, soldering irons, welding machines, or electric-ultrasonic equipment in order to solder together two or more items (usually metals), by melting and forming a metal filler in between the joints, the filler metal has a lower melting point than the adjoining metal. 
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Cylinder filler: Cylinder fillers operate and maintain the equipment and containers used to fill cylinders with gases in liquefied or compressed state.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Brazier: Braziers operate various equipment and machinery such as torches, soldering irons, fluxes and welding machines in order to join two metal pieces together, by heating, melting and forming a metal filler inbetween them, often brass or copper. Brazing can join metals such as aluminum, silver, copper, gold, and nickel. Brazing is a similar process to soldering but requires higher temperatures. 

 
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Gas distribution engineer: Gas distribution engineers design and construct transport systems for natural gas, connecting the gas distribution network to the consumer by designing piping works and mains. They research methods to ensure sustainability, and to decrease environmental impact, as well as optimising cost efficiency.
Gas production engineer: Gas production engineers develop methods to optimise the extraction and production of gas for energy and utilities. They design systems for gas production, supervise production operations and develop improvements on existing systems.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Energy engineer: Energy engineers design new, efficient and clean ways to produce, transform, and distribute energy to improve environmental sustainability and energy efficiency. They extract energy through natural resources, such as oil or gas, or renewable and sustainable sources, such as wind or solar power. 
Metal product quality control inspector: Metal product quality control inspectors perform preventive and operational quality control on the metal products. They examine the materials at various stages to make sure it conforms to the desired standard, test the products, and send them back for repair if necessary.
Gas scheduling representative: Gas scheduling representatives track and control the flow of natural gas between pipelines and the distribution system, compliant with schedules and demands. They report on the natural gas flow, ensure the schedule is followed or make scheduling adaptations in case of problems to attempt to meet demands.
Laser beam welder: Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat source that allows for precise welding.
Welding coordinator: Welding coordinators supervise the workflow of welding applications. They monitor welding processes performed by other welders, supervise the staff, being sometimes responsible for vocational training. They also weld particularly demanding parts. Welding coordinators ensure that the necessary welding equipment is ready for usage. They mostly coordinate welding applications and related professional activities.
Electron beam welder: Electron beam welders set up and tend machines designed to join separate metal workpieces together through the use of a high-velocity electron beam. They monitor the machining processes providing an alteration in the kinetic energy of the electrons that allows for them to transform into heat for the metal to melt and join together in a process of precise welding.
Welding inspector: Welding inspectors examine the connections and bonds between metals. They utilise visual tools and electrical instruments to inspect and ensure the quality and safety of connections. Welding inspectors ensure that all related welding activities, plans and materials follow the appropriate guidelines, in accordance with safety regulations. In addition to working in the field completing their examinations of welding projects, inspectors spend time in an office setting compiling their reports.

References

1. Ensure correct gas pressure – ESCO