Provide advice to technicians

Offer help and advice to service technicians in case of machine malfunctions and other repair tasks.

contribute advice to technicians
arrange advice to technicians
give advice to technical operating staff
contribute advice to technical operating staff
arrange advice to technical operating staff
give advice to technicians
furnish advice to technical operating staff
furnish advice to technicians

skill/competence

cross-sector

Provide advice to technicians is an essential skill of the following occupations:

Dismantling engineer: Dismantling engineers research and plan the optimal way to dismantle industrial equipment, machinery and buildings that reached the end-of-life phase. They analyse the required work and schedule the various operations. They give team leaders instructions and supervise their work.

Product development engineering technician: Product development engineering technicians improve efficiency of product development, set up equipment and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests and collect data.

Provide advice to technicians is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Coating machine operator: Coating machine operators set up and tend coating machines that coat metal products with a thin layer of covering of materials such as lacquer, enamel, copper, nickel, zinc, cadmium, chromium or other metal layering in order to protect or decorate the metal products’ surfaces. They run all coating machine stations on multiple coaters.
Container equipment assembly supervisor: Container equipment assembly supervisors monitor the assembly process of containers such as boilers or pressure vessels. They train and coach the workers involved in the assembly to achieve production goals.
Table saw operator: Table saw operators work with industrial saws that cut with a rotating circular blade. The saw is built into a table. The operator sets the height of the saw to control the depth of the cut. Particular attention is paid to safety, as factors such as natural stresses within the wood may produce unpredictable forces.
Riveter: Riveters assemble several metal parts together by riveting guns, rivet set and hammers, or by operating a riveting machine that all perform the purpose of drilling holes on the rivet shank of the metal part and of inserting rivets, bolts, into these holes in order to fasten them together.
Hydraulic forging press worker: Hydraulic forging press workers set up and tend hydraulic forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of compressive forces generated by a piston and fluid pressure.
Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Briquetting machine operator: Briquetting machine operators tend equipment to dry, mix, and compress metal chips into briquettes for use in a smelter.
Hydroelectric plant operator: Hydroelectric plant operators operate and maintain the equipment used in the production of energy from the movement of water. They monitor the measuring equipment, assess the production needs, and adapt the water flow to meet these needs. They also perform repairs and maintenance duties.
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Precision mechanics supervisor: Precision mechanics supervisors oversee, train and manage workers who fit together complex parts of small-size machines such as measuring or control mechanisms.
Engraving machine operator: Engraving machine operators set up, programme, and tend engraving machines designed to precisely carve a design in the surface of a metal workpiece by a diamond stylus on the mechanical cutting machine that creates small, separate printing dots existing from cut cells. They read engraving machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the precise engraving controls, such as the depth of the incisions and the engraving speed.
Machinery assembly coordinator: Machinery assembly coordinators prepare and plan the manufacturing of machinery. They monitor the entire production process and ensure that individual assemblies and resources are provided on time.
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Wind energy engineer: Wind energy engineers design and install wind energy farms and equipment. They research and test locations to find the most productive location, test equipment such as wind-turbine blades, and develop strategies for more efficient energy production, and environmental sustainability.
Tumbling machine operator: Tumbling machine operators set up and operate tumbling machines, often wet or drie tumbling barrels, designed to remove excess material and burrs of heavy metal workpieces and precious metals and to improve surface appearance, by rotating the metal pieces in a barrel together with grit and potentially water, allowing for the friction between the pieces mutually and with the grit to cause a rounding, smooth effect.
Grinding machine operator: Grinding machine operators set up, program and control grinding machines, designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by using an abrasive wheel with diamond teeth as a cutting device for very precise and light cuts. They read grinding machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the grinding controls, such as the depth of cuts and the rotation speed.
Production plant crane operator: Production plant crane operators operate the basic technologic cranes during the production process at the given unit by lifting and moving loads (bales, containers, buckets and other facilities) with raw and other materials.
Water jet cutter operator: Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or an abrasive substance mixed with water.
Component engineer: Component engineers design and envision the engineering development of different small parts composing a bigger project, machine, or process. They ensure that parts are not conflicting from an engineering perspective.
Heating, ventilation, air conditioning engineer: Heating, ventilation, air conditioning engineers design and develop heating, ventilation, air conditioning and possibly refrigeration systems for usage in residences, manufacturing sites, offices, commercial buildings, etc. They strive for solutions that serve the needs of clients and respond to architectural restrictions of sites.
Vessel assembly supervisor: Vessel assembly supervisors coordinate the employees involved in boat and ship manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity. Vessel assembly supervisors train employees in company policies, job duties and safety measures. They check compliance with applied working procedures and engineering. Vessel assembly supervisors oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Moulding machine operator: Moulding machine operators operate machines that are part of the production process of moulds for the manufacturing of castings or other moulded materials. They tend the mouldmaking machines that use the appropriate materials such as sand, plastics, or ceramics to obtain the moulding material. They may then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of moulded products such as ferrous and non-ferrous metal castings.
Rotating equipment engineer: Rotating equipment engineers develop designs and specifications for rotating equipment according to any applicable standards. They also provide technical expertise and help ensure that all new and existing equipment installations are completed.
Machine operator supervisor: Machine operator supervisors coordinate and direct workers who set up and operate machines. They monitor the production process and the flow of materials, and they make sure that the products meet the requirements.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Machinery assembly supervisor: Machinery assembly supervisors monitor the machinery assembly process. They train and coach assembly workers to achieve production goals.
Marine surveyor: Marine surveyors inspect vessels intended for operations in maritime or open sea waters. They ensure that vessels and equipment follow the regulations laid down by the International Maritime Organisation (IMO). They may also act as third parties for the review of offshore facilities and construction projects.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Abrasive blasting operator: Abrasive blasting operators use the proper equipment and machinery to smoothen rough surfaces by abrasive blasting. Abrasive blasting is commonly used in the finishing process of metal workpieces and for blasting building materials used in masonry such as bricks, stones and concrete. They operate blasters or sand cabinets which forcibly thrust a stream of abrasive material such sand, soda or water, under high pressure, propelled by a centrifigal wheel, in order to shape and smoothen surfaces.
Production supervisor: Production supervisors coordinate, plan and direct manufacturing and production processes. They are responsible for reviewing production schedules or orders as well as dealing with staff in these production areas.
Planer thicknesser operator: Planer thicknesser operators use machinery to shave wood planks to a uniform thickness. The machine usually planes both sides of the plank in one operation. They feed the plank into the machine carefully to prevent excess planing at the edge known as ‘snipe’.
Surface grinding machine operator: Surface grinding machine operators set up and tend surface grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by an abrasive grinding wheel, or wash grinder, rotating on a horizontal or vertical axis.
Cylindrical grinder operator: Cylindrical grinding operators set up and tend cylindrical grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by multiple abrasive grinding wheels with diamond teeth as a cutting device for very precise and light cuts, as the workpiece is fed past it and formed into a cylinder.
Packing machinery engineer: Packing machinery engineers are in charge of and responsible for packaging machinery. They maintain and improve technical standards, analyse results, set up improvement plans, and are responsible for machinery maintenance.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Robotics engineer: Robotics engineers design and develop robotic devices and applications in combination with mechanical engineering principles. They use pre-established designs and current developments for improving or inventing systems, machinery and equipment. They combine several knowledge fields such as computing, engineering, and electronics in the development of new engineering applications.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Lathe and turning machine operator: Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved by computer-controlled motors. They read lathe and turning machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the lathe controls, such as the depth of cuts and the rotation speed.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Wood fuel pelletiser: Wood fuel pelletisers operate a hammer mill to turn wood waste products into pellets for use as fuel. The milled product is afterward pressed through a die, producing the standardised shape and size of a pellet.
Laser marking machine operator: Laser marking machine operators set up and tend laser marking or engraving machines designed to precisely carve a design in the surface of a metal workpiece by use of a moving controller and an engraving laser beam point attached to it that traces patterns on the metal workpiece’s surface. They make adjustments to the machine in terms of laser beam intensity, direction and speed of movement. They also ensure the laser table, used to perform laser machine engravings on and guides the laser beam, is properly set up.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Thread rolling machine operator: Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die against metal blank rods, creating a larger diameter than those of the original blank workpieces.
Tooling engineer: Tooling engineers design new tools for manufacturing equipment. They prepare tooling quotation requests. They estimate costs and delivery time, manage tooling construction follow-up and supervise the routine maintenance of tools. They also analyse data to determine the cause of major tooling difficulties and develop recommendations and action plans for solutions.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Metal production supervisor: Metal production supervisors oversee the day-to-day working process and activities of the labourers in a metal fabrication factory. They supervise staff, create work schedules, maintain a safe work environment and serve as the first, most accessible management representative for the workers to contact when there is need.
Wood boring machine operator: Wood boring machine operators use milling machines or specialise boring jigs to cut holes in wood workpieces. Wood boring differs from routing mainly in that the main movement is into the workpiece as opposed to across its surface.
Fluid power engineer: Fluid power engineers supervise the assembly, installation, maintenance, and testing of fluid power equipment in accordance with specified manufacturing processes. They create designs with schematics and assembly models, make drawings and bills of materials for components, and analyse equipment.
Tool grinder: Tool grinder perform precision grinding processes on metal objects and tools. They grind, sharpen or smoothen metal surfaces using the appropriate tools and instruments. Tool grinders follow tooling instructions and assure the processed workpiece meets the necessary specifications.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Sawmill operator: Sawmill operators work with automated lumber mill equipment which saws timber into rough lumber. They also handle various sawing machines which further process the lumber in various shapes and sizes. These processes are nowadays often computer controlled.
Industrial tool design engineer: Industrial tool design engineers design various industrial tools in accordance with customer needs, manufacturing requirements, and building specifications. They test the designs, look for solutions to any problems, and oversee production.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Container equipment design engineer: Container equipment design engineers design equipment to contain products or liquids, according to set specifications, such as boilers or pressure vessels. They test the designs, look for solutions to any problems and oversee production.
Aircraft assembly supervisor: Aircraft assembly supervisors coordinate the employees involved in aircraft manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Wind turbine technician: Wind turbine technicians maintain and repair wind turbines by performing diagnostic inspections, analysing faults, and performing repair duties. They ensure the wind turbines operate in compliance with regulations, and assist the wind engineers in the construction of wind turbines. Wind turbine technicians may also test and install hardware and software components of wind turbines.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Milling machine operator: Milling machine operators set up, program and control milling machines, designed to cut excess material from metal workpieces using a computer-controlled rotary-cutting, milling cutter. They read milling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the depth of cuts or the rotation speed.
Heat treatment furnace operator: Heat treatment furnace operators monitor the process of heat treatment of castings. They control the treatment furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, and loading vessels. They control the chemicothermal treatment of castings in order to reach the standards.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Agricultural equipment design engineer: Agricultural equipment design engineers apply knowledge of engineering and biological science to solve various agricultural problems such as soil and water conservation and the processing of agricultural products. They design agricultural structures, machinery, equipment and processes.
Straightening machine operator: Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle and the height of the straightening rolls and select the settings for the pressing force required to straighten the workpiece, taking into account the end product’s yield strenght and size, without excess work hardening.
Band saw operator: Band saw operators work with industrial saws that feature a continuous flexible blade revolving around two or more wheels. Band saws are most effective at producing irregular shapes.
Industrial maintenance supervisor: Industrial maintenance supervisors organise and supervise the activities and maintenance operations of machines, systems and equipment. They ensure inspections are done according to health, safety and environmental standards, and productivity and quality requirements.
Chain making machine operator: Chain making machine operators tend and operate the proper equipment and machinery for the creation of metal chains, including precious metal chains such as for jewellery, and produce these in all steps of the production process. They feed the wire into the chainmaking machine, use pliers to hook the ends of the chain formed by the machine together and finish and trim the edges by soldering them to a smooth surface.
Industrial assembly supervisor: Industrial assembly supervisors are in charge of organizing, planning and coordinating assembly operations. They keep track of all the work activities and manage the process for efficient functioning in order to tackle problems such as production loss. They answer to the industrial production and the manufacturing manager.
Electroplating machine operator: Electroplating machine operators set up and tend electroplating machines designed to finish and coat the metal workpieces’ (such as future pennies and jewelry) surface by using electric current to dissolve metal cations and to bond a thin layer of another metal, such as zinc, copper or silver, to produce a coherent metal coating to the workpiece’s surface.
Mechanical forging press worker: Mechanical forging press workers set up and tend mechanical forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of preset, compressive forces provided by cranks, cams and toggles at reproducible strokes.
Laser cutting machine operator: Laser cutting machine operators set up, program and tend laser cutting machines, designed to cut, or rather burn off and melt, excess material from a metal workpiece by directing a computer-motion-controlled powerful laser beam through laser optics. They read laser cutting machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the intensity of the laser beam and its positioning.
Wood production supervisor: Wood production supervisors monitor processes involved in the conversion of felled trees into usable lumber. They follow the production process and make quick decisions to resolve problems. ​They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness, can be achieved.
Engineered wood board machine operator: Engineered wood board machine operators work with machines to bond particles or fibres made from wood or cork. Various industrial glues or resins are applied to obtain fibre board, particle board or cork board.
Spring maker: Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring.
Laser beam welder: Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat source that allows for precise welding.
Scrap metal operative: Scrap metal operative cut big sheets of metal scrap in order to prepare them for being used in a smelter.
Dip tank operator: Dip tank operators set up and tend dip tanks, which are coating machines, designed to provide otherwise finished work pieces with durable coating by dipping them in a tank of a specific sort of paint, preservative or molten zinc.
Nailing machine operator: Nailing machine operators work with machines that nail wooden elements together, usually hydraulically. They put the elements to be nailed in the right position, and monitor the process to prevent downtime.

References

1. Provide advice to technicians – ESCO