Feed hoppers

Feed hoppers with the required materials using various tools such as lifting equipment or shovels.

supply hoppers
supplying hoppers
hoppers feeding
hopper supplying
hoppers supplying
feeding hoppers
hopper feeding

skill/competence

cross-sector

Feed hoppers is an essential skill of the following occupations:

Fibreglass machine operator: Fibreglass machine operators control and maintain the machine that sprays a mix of resin and glass fibers onto products such as bathtubs or boat hulls to obtain strong and lightweight composite end-products.

Feed hoppers is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Plastic heat treatment equipment operator: Plastic heat treatment equipment operators manipulate plastic products using machinery such as furnaces or flame-hardening machines in order to temper, anneal or heat-treat. They set up the machinery and read the production instructions to determine the furnace temperature. Plastic heat treatment equipment operators remove products from machines, let them cool down, examine and test products to see if they conform to specifications.
Injection moulding operator: Injection moulding operators operate and monitor injection moulding machines, in order to cast products from thermoplastic materials. They regulate the temperature, pressure, and volume of plastic, according to pre-defined specifications. Injection moulding operators also remove finished products and cut-away excess material, using a knife or other hand tools.
Concrete pump operator: Concrete pump operators drive and operate trucks to haul concrete from the plant to project sites, and operate pumps to disperse concrete at the site. They also clean and maintain the truck and its mechanical parts.
Wood fuel pelletiser: Wood fuel pelletisers operate a hammer mill to turn wood waste products into pellets for use as fuel. The milled product is afterward pressed through a die, producing the standardised shape and size of a pellet.
Blow moulding machine operator: Blow moulding machine operators operate and monitor blow moulding machine to mould plastic goods, according to requirements. They regulate temperature, air pressure and volume of plastic, according to specifications. Blow moulding machine operators remove finished products and cut away excess material, using a knife. They regrind surplus material and rejected workpieces for reuse, using a grinding machine.
Plastic rolling machine operator: Plastic rolling machine operators operate and monitor machines to produce plastic rolls, or to flatten and reduce the material. They examine raw materials and finished products to make sure they are according to specifications.
Cake press operator: Cake press operators set up and tend the hydraulic presses that compress and bake plastic chips into cake moulds to produce plastic sheets. They regulate and adjust the pressure and temperature.
Concrete finisher: Concrete finishers work with binding agents like cement and concrete. They put up any removable forms and pour concrete into the forms. They then execute one or several actions to finish the concrete: cutting, screeding or levelling, compacting, smoothing, and chamfering to prevent chipping.
Dry press operator: Dry press operators press dry tempered clay or silica into bricks and other shapes. They select and fix the pressing dies, using rule and wenches. Dry press operators remove the bricks from the press machine and stack them in a specified pattern on the kiln car.
Compression moulding machine operator: Compression moulding machine operators set up and operate machines to mould plastic products, according to requirements. They select and install dies on press. Compression moulding machine operators weigh the amount of premixed compound needed and pour it into the die well. They regulate the temperature of dies.

References

1. Feed hoppers – ESCO