Instrument performance elements

Elements that indicate or influence instrument performance. A first indication of the performance of the instrument is the accuracy or precision of the instrument, such as its response time, resolution, and range. A second indication of performance is the technical performance of the instrument, such as its power level, the electromagnetic interference, and transient voltages. A third indication of performance are environmental factors that can influence instrument performance, such as humidity, operating temperatures, or dust.

instrument performance influences
performance elements of instruments
instrument performance indicators
types of instrument performance elements
performance elements of instrument
range of instrument performance elements
indicators of instrument performance
influences on instrument performance

knowledge

cross-sector

Instrument performance elements is an essential knowledge of the following occupations:

Electrical equipment inspector: Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies back to production.
Electronic equipment inspector: Electronic equipment inspectors check electronic equipment for any defects and malfunctions. They ensure that the equipment is correctly assembled according to specifications and national and international regulations.
Printed circuit board test technician: Printed circuit board test technicians inspect and test printed circuit boards. They perform a range of printed circuit board testing procedures and may perform minor repairs.
Battery test technician: Battery test technicians use positive and negative wired plugs to test battery’s resistance capacity. They also test rejected batteries to determine their flaws.
Control panel tester: Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and testing equipment to detect malfunctions and may correct faulty wiring and components.
Computer hardware test technician: Computer hardware test technicians conduct testing of computer hardware such as circuit boards, computer chips, computer systems, and other electronic and electrical components. They analyse the hardware configuration and test the hardware reliability and conformance to specifications.
Calibration technician: Calibration technicians test and calibrate electrical and electronic equipment. They read blueprints and other technical drawings to develop testing procedures for every product.
Precision instrument assembler: Precision instrument assemblers read blueprints and assembly drawings to assemble precision instruments such as micrometers, gauges, thermostats and utility meters. They collect the different components and piece them together using hand tools or machinery. Furthermore they calibrate the instruments and test their precision.

Instrument performance elements is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Precision device inspector: Precision device inspectors make sure precision devices, such as micrometers and gauges, operate according to design specifications. They may adjust the precision devices and their components in case of any faults.
Instrumentation engineering technician: Instrumentation engineering technicians assist instrumentation engineers in the development of control equipment, such as valves, relays, and regulators, which can be used to monitor and control processes. Instrumentation engineering technicians are responsible for building, testing, monitoring, and maintaining of equipment. They use wrenches, beam cutters, grind saws, and overhead cranes to build and repair equipment.
Automated optical inspection operator: Automated optical inspection operators (AOI operators) operate automated optical inspection machines to inspect assembled printed circuit boards. They read blueprints and inspect the finished or in-process PCB assemblies for flaws or defects.

References

1. Instrument performance elements – ESCO