Maintain test equipment

Essential for

• Engineered wood board grader
  Engineered wood board graders inspect finished engineered wood products for quality issues such as incomplete gluing, warping or blemishing. They also test load bearing qualities o…
• Pulp grader
  Pulp graders grade paper pulp based on a number of possible criteria, such as pulping process, raw materials, bleaching methods, yield, and fibre length. Other titles The following…
• Lumber grader
  Lumber graders inspect lumber, or wood cut into planks. They test the lumber, look for irregularities and grade the wood based on quality and desirability of the pattern. Other…
• Fire safety tester
  Fire safety testers conduct a variety of tests on materials such as building, transportation and textiles materials, as well as on fire prevention and fire fighting systems. They m…
• Metal product quality control inspector
  Metal product quality control inspectors perform preventive and operational quality control on the metal products. They examine the materials at various stages to make sure it conf…
• Product grader
  Product graders perform preventive and operational quality control on products and resources. They inspect, grade and evaluate the materials at various stages to make sure it confo…
• Material testing technician
  Material testing technicians perform a variety of tests on materials such as soils, concrete, masonry and asphalt, in order to verify conformance to intended usage cases and specif…

Optional for

• Commissioning technician
  Commissioning technicians work with commissioning engineers to supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning o…
• Electrical equipment inspector
  Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies…
• Electronic equipment inspector
  Electronic equipment inspectors check electronic equipment for any defects and malfunctions. They ensure that the equipment is correctly assembled according to specifications and n…
• Printed circuit board test technician
  Printed circuit board test technicians inspect and test printed circuit boards. They perform a range of printed circuit board testing procedures and may perform minor repairs. Duti…
• Water quality analyst
  A Water Quality Analyst is a scientific professional who monitors, tests, and evaluates the chemical, physical, and biological properties of water to ensure it meets environmental …
• Quality engineer
  Quality engineers define quality standards for the creation of products or services. They check to make sure the products and services are in compliance with the quality standards …
• Automated optical inspection operator
  Automated optical inspection operators (AOI operators) operate automated optical inspection machines to inspect assembled printed circuit boards. They read blueprints and insp…
• Battery test technician
  Battery test technicians use positive and negative wired plugs to test battery's resistance capacity. They also test rejected batteries to determine their flaws. Other titles The f…
• Cylinder filler
  Cylinder fillers operate and maintain the equipment and containers used to fill cylinders with gases in liquefied or compressed state. Other titles The following job titles also re…
• Product quality inspector
  Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline. They observe, measure, test, and form questions in …
• Consumer goods inspector
  Consumer goods inspectors evaluate assembled parts of consumer goods and products for compliance with specifications and defects in-line with clients' requirements and organisation…
• Product assembly inspector
  Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients' requirements and organisational policies. They use measuring and …
• Nuclear technician
  Nuclear technicians function as aids to physicists and engineers in nuclear laboratories and power plants. They monitor the procedures to ensure safety and quality control, and mai…
• Groundwater monitoring technician
  Groundwater monitoring technician monitor the environment, gathering data in the form of samples and performing tests in a laboratory or field, to investigate potential sources of …
• Rolling stock engine tester
  Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test s…
• Non-destructive testing specialist
  Non-destructive testing specialists carry out testing of vehicles, vessels, other manufactured objects, and construction structures without having to damage them. They use special …
• Rolling stock engine inspector
  Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, p…
• Motor vehicle engine inspector
  Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to en…
• Precision engineer
  Precision engineers design processes, machines, fixtures and other equipment that have exceptionally low engineering tolerances, are repeatable and stable over time. They ensure pr…
• Quality engineering technician
  Quality engineering technicians work with quality engineers or managers to analyse and solve quality problems and improve productivity. They examine machines for imperfections and …
• Vessel assembly inspector
  Vessel assembly inspectors use measuring and testing equipment to inspect and monitor boat and ship assemblies to ensure conformity to engineering specifications and to safety stan…
• Product quality controller
  Product quality controllers check the quality of manufactured products. They work in manufacturing facilities where they perform basic inspection and evaluation of products before,…
• Aircraft assembly inspector
  Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standar…
• Control panel tester
  Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and tes…
• Aircraft engine tester
  Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories. They position or give directions to workers positionin…
• Motor vehicle engine tester
  Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to wo…
• Avionics inspector
  Avionics inspectors inspect instruments, electrical, mechanical and electronic systems of aircrafts to ensure their compliance with the performance and safety standards. They also …
• Process engineer
  A Process Engineer designs, implements, and optimizes industrial processes used to produce goods and materials efficiently, safely, and cost-effectively. They work to improve produ…
• Computer hardware test technician
  Computer hardware test technicians conduct testing of computer hardware such as circuit boards, computer chips, computer systems, and other electronic and electrical components. Th…
• Calibration technician
  Calibration technicians test and calibrate electrical and electronic equipment. They read blueprints and other technical drawings to develop testing procedures for every product. D…
• Rolling stock assembly inspector
  Rolling stock assembly inspectors use measuring and testing equipment to inspect and monitor rolling stock assemblies to ensure conformity to engineering specifications and to safe…
• Vessel engine inspector
  Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LN…
• Chemical manufacturing quality technician
  Chemical manufacturing quality technicians perform inspections and precision measurements in order to test and ensure the quality of products such as raw materials, packing materia…
• Vessel engine tester
  Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engin…
• Aircraft engine inspector
  Aircraft engine inspectors inspect all types of engines used for aircraft in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overha…