Use testing equipment

Use equipment to test performance and operation of machinery.

utilise testing equipment
manage testing equipment
make use of testing equipment
use equipment for testing
employ testing tools
work with testing tools
deal with testing equipment
apply testing equipment

skill/competence

cross-sector

Use testing equipment is an essential skill of the following occupations:

Air traffic safety technician: Air traffic safety technicians provide technical support regarding the safety of air traffic control and navigation systems. They design, maintain, install and operate these systems both in the airport and on board the aeroplane according to regulations.
Fluid power technician: Fluid power technicians install and assemble equipment that uses liquid or gas pressure to transmit or regulate power. They also perform tests on and maintain this equipment.
Electrical equipment inspector: Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies back to production.
Electronic equipment inspector: Electronic equipment inspectors check electronic equipment for any defects and malfunctions. They ensure that the equipment is correctly assembled according to specifications and national and international regulations.
Industrial machinery mechanic: Industrial machinery mechanics work on new machinery and equipment in operation. They set up for the specific application and build accessories if necessary, perform maintenance and repair, and run diagnostics to find faults in systems or parts that need replacing.
Electronics engineering technician: Electronics engineering technicians work closely with electronics engineers in the development of electronic equipment and devices. Electronics engineering technicians are responsible for building, testing, and maintaining electronic devices.
Textile machinery technician: Textile machinery technicians set up, maintain, inspect and repair mechanical and computer-controlled machinery used in textile manufacturing such as weaving, dyeing and finishing machines.
 
Medical device engineering technician: Medical device engineering technicians collaborate with medical device engineers in the design, development and production of medical-technical systems, installations, and equipment such as pacemakers, MRI machines, and X-ray devices. They build, install, inspect, modify, repair, calibrate, and maintain medical-technical equipment and support systems. Medical device engineering technicians  are responsible for the operational readiness, safe use, economic operation and the appropriate procurement of medical equipment and facilities in hospitals.
Heating, ventilation, air conditioning and refrigeration engineering technician: Heating, ventilation, air conditioning and refrigeration engineering technicians aid in the design of devices which provide heating, ventilation, air conditioning and possibly refrigeration in buildings. They ensure the equipment complies with environmental standards. They handle hazardous materials used in the systems, and ensure safety precautions are in place.
Sewerage maintenance technician: Sewerage maintenance technicians inspect sewers and pipeline systems. They do this by using moving video cameras, whose recordings tell them whether they need to perform any maintenance and repair on these types of systems.
Pneumatic systems technician: Pneumatic systems technicians use blueprints and technical documentation to assemble and install equipment operated by gas or air under pressure. They set up the systems according to engineering specifications and test them to ensure good functioning order. They may also perform maintenance and repair work on installed pneumatic equipment.
Forge equipment technician: Forge equipment technicians maintain and repair forge machinery such as presses and material handling equipment. They perform evaluations of the equipment, perform preventative maintenance activities, and repair faults. They also assist in the installation of the equipment and ensure proper functionality.
Moulding machine technician: Moulding machine technicians service machinery used in the casting and moulding of plastics and other materials. They calibrate the equipment, perform maintenance activities, examine finished products and repair faults.
Maintenance and repair engineer: Maintenance and repair engineers focus on the optimization of equipment, procedures, machineries and infrastructure. They ensure their maximum availability at minimum costs.
Consumer goods inspector: Consumer goods inspectors evaluate assembled parts of consumer goods and products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. Consumer goods inspectors provide results and findings for reports. Inspected defects can be identified as being cracks, scratches, errors in sanding, and defects of moving parts.
Heating engineer: Heating engineers install and maintain gas, electric, oil, solid-fuel and multiple fuel heating and ventilation equipment as stand-alone heating and ventilation systems or build into machinery and transport equipment. They follow instructions and blueprints, perform maintance on systems, perform safety checks and repair the systems.
Steam plant operator: Steam plant operators operate and maintain mechanical equipment such as stationary engines and boilers to provide utilities for domestic or industrial use. They monitor proceedings to ensure compliance with safety regulations, and perform tests to ensure quality.
Product assembly inspector: Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. They use measuring and testing equipment to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They also provide detailed inspection documentation and recommend action where problems are discovered.
Commissioning engineer: Commissioning engineers supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning of the equipment, facilities and plants to make sure they meet the requirements and specifications. They perform the necessary verifications and give approval to finalise the project.
Nuclear technician: Nuclear technicians function as aids to physicists and engineers in nuclear laboratories and power plants. They monitor the procedures to ensure safety and quality control, and maintain equipment. They also handle and control radioactive equipment and measure radiation levels to ensure safety.
Heating, ventilation, air conditioning (and refrigeration) service engineer: Heating, ventilation, air conditioning (and refrigeration) service engineers install and maintain industrial heating, air conditioning and possibly refrigeration systems. They set up furnaces, thermostats, ducts, vents, and other equipment needed to ensure the controlled passage and treatment of air. They also carry out repairs.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Aircraft maintenance engineer: Aircraft maintenance engineers make preflight and postflight inspections, adjustments, and minor repairs to ensure safe and sound performance of aircrafts. They inspect aircraft prior to takeoff to detect malfunctions such as oil leaks, electrical or hydraulic problems. They verify passenger and cargo distribution and amount of fuel to ensure that weight and balance specifications are met.
Non-destructive testing specialist: Non-destructive testing specialists carry out testing of vehicles, vessels, other manufactured objects, and construction structures without having to damage them. They use special equipment such as X-ray, ultrasound, radiographics, or infrared instruments to perform testing activities and report based on the observed results.
Rolling stock engine inspector: Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centers. They review administrative records, analyse the operating performance of engines and report their findings.
Motor vehicle engine inspector: Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Vessel assembly inspector: Vessel assembly inspectors use measuring and testing equipment to inspect and monitor boat and ship assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Steam turbine operator: Steam turbine operators operate and maintain machinery which generates power. They ensure the safety of the operations and monitor operations to detect problems, and react to emergency situations.
Fire safety tester: Fire safety testers conduct a variety of tests on materials such as building, transportation and textiles materials, as well as on fire prevention and fire fighting systems. They measures, among other things, the flame resistance and behaviour of materials under extreme circumstances.
Construction equipment technician: Construction equipment technicians inspect, maintain and repair heavy-duty vehicles used in construction, forestry and earthworks such as bulldozers, excavators and harvesters. They perform evaluations of the equipment, and ensure the safety and optimal efficiency of the machinery.
Aircraft assembly inspector: Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction or damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Control panel tester: Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and testing equipment to detect malfunctions and may correct faulty wiring and components.
Aircraft engine tester: Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories.They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle engine tester: Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Avionics inspector: Avionics inspectors inspect instruments, electrical, mechanical and electronic systems of aircrafts to ensure their compliance with the performance and safety standards. They also examine maintenance, repair and overhaul work and review any modification to check its conformity to standards and procedures. They provide detailed inspection, certification and repair records.
Computer hardware test technician: Computer hardware test technicians conduct testing of computer hardware such as circuit boards, computer chips, computer systems, and other electronic and electrical components. They analyse the hardware configuration and test the hardware reliability and conformance to specifications.
Calibration technician: Calibration technicians test and calibrate electrical and electronic equipment. They read blueprints and other technical drawings to develop testing procedures for every product.
Rolling stock assembly inspector: Rolling stock assembly inspectors use measuring and testing equipment to inspect and monitor rolling stock assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Wastewater treatment technician: Wastewater treatment technicians aid wastewater treatment operators in the operation and maintenance of wastewater treatment equipment, and the purification procedure of wastewater, in sewage plants. They perform repair duties.
Vessel engine inspector: Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, fuel dual engines and, in some cases, marine steam engines in assembly facilities to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Vessel engine tester: Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, dual fuel engines and, in some cases, marine steam engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Metrology technician: Metrology technicians apply their practical knowledge of metrology to calibrate measuring instruments, test equipment and analyse their performance. They ensure that the evaluated equipment meets requirements for precision, performance and accuracy. They report about their work and advise on technical matters concerning measuring instruments.
Material testing technician: Material testing technicians perform a variety of tests on materials such as soils, concrete, masonry and asphalt, in order to verify conformance to intended usage cases and specifications.
Aircraft engine inspector: Aircraft engine inspectors inspect all types of engines used for aircrafts in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Agricultural machinery technician: Agricultural equipment technicians repair, overhaul and maintain agricultural equipment including tractors, tillage equipment, seeding equipment and harvesting equipment. They perform evaluations of the equipment, perform preventive maintenance activities and repair faults.
Metrologist: Metrologists study and practice the science of measurement. They develop quantity systems, units of measurement and measuring methods to be used in science. Metrologists establish new methods and tools to quantify and better understand information.
Rolling stock electrician: Rolling stock electricians install, maintain and repair electrical and electronic systems in rail vehicles such as air conditioning systems, lamps, heating systems, electrical wiring etc. They use diagnostic testing equipment to inspect vehicles and find faults. To do repair work, they use hand tools and specialised electrical instruments and machines.
Electric meter technician: Electric meter technicians install and maintain electric meter systems in facilities or buildings. They install the equipment in accordance with regulations and repair faults and other problems. They test the equipment and advise on the use and care.

Use testing equipment is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Marine engineering technician: Marine engineering technicians carry out technical functions to help marine engineers with the design, development, manufacturing and testing processes, installation and maintenance of all types of boats from pleasure crafts to naval vessels, including submarines. They also conduct experiments, collect and analyse data and report their findings.
Aerospace engineering technician: Aerospace engineering technicians work with aerospace engineers to operate, maintain and test equipment used on aircraft and spacecraft. They review blueprints and instructions to determine test specifications and procedures. They use software to make sure that parts of a spacecraft or aircraft are functioning properly. They record test procedures and results, and make recommendations for changes.
Aircraft engine specialist: Aircraft engine specialists advise on maintaining procedures to engines of aircrafts and helicopters. They perform operability tests to components and parts of aircrafts to diagnose suitability for usage and possible operations to improve performance. They interpret and provide support to understand the technical specifications given by manufacturers for application at the airport’s premises.
Steam engineer: Steam engineers provide energy and utilities to facilities, such as steam, heat and refrigeration. They operate and maintain equipment such as boilers and air compressors, and research and develop new methods and improvements for the provision of utilities.
Rolling stock engineering technician: Rolling stock engineering technicians carry out technical functions to help rolling stock engineers with the design, development, manufacturing and testing processes, installation and maintenance of rail vehicles such as wagons, multiple units, carriages and locomotives. They also conduct experiments, collect and analyse data and report their findings.
Production engineering technician: Production engineering technicians plan production, follow up production processes and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests, conduct tests collect data.
Container equipment assembler: Container equipment assemblers manufacture containers such as boilers or pressure vessels. They read blueprints and technical drawings to assemble parts and to build piping and fittings.
Equipment engineer: Equipment engineers design and maintain the machinery and equipment in manufacturing facilities. They design machinery that adjusts to the manufacturing requirements and processes. Moreover, they envision the maintenance of the machines and equipment for uninterrupted functioning.

Component engineer: Component engineers design and envision the engineering development of different small parts composing a bigger project, machine, or process. They ensure that parts are not conflicting from an engineering perspective.
Rotating equipment mechanic: Rotating equipment mechanics are responsible for preventive and corrective maintenance activities for rotating equipment such as turbines, compressors, engines, and pumps. They ensure the availability and integrity of the installed systems and equipment in terms of safety and reliability.
Automotive test driver: Automotive test drivers drive prototype and pre-production vehicles and assess their performance, safety and comfort. They test the models in various driving situations and prepare reports to help engineers improve their designs and identify problems. They can work for manufacturers, independent vehicle test organisations or automotive magazines.
Engineered wood board grader: Engineered wood board graders inspect finished engineered wood products for quality issues such as inclomplete gluing, warping or blemishing. They also test load bearing qualities of the wood. Graders sort products for quality according to guidelines.
Pneumatic engineering technician: Pneumatic engineering technicians evaluate operating pneumatic systems and assemblies such as compressed air machines, and recommend modifications for more efficiency. They are also involved in the design of pneumatic systems and components such as circuits.
Product development engineering technician: Product development engineering technicians improve efficiency of product development, set up equipment and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests and collect data.
Automotive engineering technician: Automotive engineering technicians work with automotive engineers to operate, repair, maintain and test equipment used in motor vehicles. In some environments, such as an airport they are responsible for keeping equipment and vehicles serviceable. They review blueprints and designs to determine test specifications and procedures. Automotive engineering technicians use software to make sure that parts of a motor vehicle are functioning properly. They record test procedures and results, and make recommendations for changes.
Process engineering technician: Process engineering technicians work closely with engineers to evaluate the existing processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Cylinder filler: Cylinder fillers operate and maintain the equipment and containers used to fill cylinders with gases in liquefied or compressed state.
Product quality inspector: Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline. They observe, measure, test, and form questions in order to fill in forms and present levels of compliance with comments after the inspection process. Product quality inspectors are employed or work externally for companies.
Design engineer: Design engineers develop new conceptual and detailed designs. They create the look for these concepts or products and the systems used to make them. Design engineers work with engineers and marketers to enhance the functioning and efficiency of existing devices.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Aircraft gas turbine engine overhaul technician: Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the engines using engine-specific tooling.
Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Aircraft maintenance technician: Aircraft maintenance technicians perform preventive maintenance to aircrafts, aircrafts components, engines and assemblies, such as airframes and hydraulic and pneumatic systems. They perform inspections following strict protocols and aviation laws.
Precision engineer: Precision engineers design processes, machines, fixtures and other equipment that have exceptionally low engineering tolerances, are repeatable and stable over time. They ensure prototypes are built and tested and make sure the designs meet system specifications and operational requirements.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Waste treatment engineer: Waste treatment engineers design processes, facilities and equipment used in the collection, treatment, and distribution of waste. They research environmental standards and policies in order to optimise waste treatment procedures and ensure minimal strain on the environment by analysing and classifying the processed waste.
Lumber grader: Lumber graders inspect lumber, or wood cut into planks. They test the lumber, look for irregularities and grade the wood based on quality and desirability of the pattern.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Thermal engineer: Thermal engineers design systems which provide heating or cooling, using thermodynamics, that transfer heat or energy through liquids and gases. They also construct these systems, and perform test to ensure proper functionality.
Energy engineer: Energy engineers design new, efficient and clean ways to produce, transform, and distribute energy to improve environmental sustainability and energy efficiency. They extract energy through natural resources, such as oil or gas, or renewable and sustainable sources, such as wind or solar power. 
Mechanical engineering technician: Mechanical engineering technicians provide technical support to mechanical engineers in producing and manufacturing mechanical machinery. They help make designs and adjustments, and perform tests. They also develop layouts and drawings, collate and interpret data and write reports.
Process engineer: Process engineers apply engineering concepts in order to improve all kinds of production and manufacturing processes in terms of efficiency and productivity. They evaluate the variables and constraints present in given processes and present engineering solutions to optimise them.
Veneer grader: Veneer graders inspect slices of veneer for quality. They look for irregularities, blemishes and production errors, and grade the slices for the desirability of the patterns.
Industrial engineering technician: Industrial engineering technicians assist industrial engineers in improving efficiency, safety and productivity in manufacturing plants. They conduct production studies, prepare layouts for machinery and equipment and suggest solutions to remedy quality problems.
Industrial machinery assembler: Industrial machinery assemblers manufacture industrial equipment such as industrial robots, assembly line machines, and labeling machines. They use hand tools and computer-controlled machines.
Engineered wood board machine operator: Engineered wood board machine operators work with machines to bond particles or fibres made from wood or cork. Various industrial glues or resins are applied to obtain fibre board, particle board or cork board.
Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Product grader: Product graders perform preventive and operational quality control on products and rescources. They inspect, grade and evaluate the materials at various stages to make sure it conforms to the desired standard, and send the product back for repair or improvement if necessary. They work in companies and industrial facilities to ensure the produced commodities achieve quality standards.
Precision mechanic: Precision mechanics manufacture precision metal components for machines and assemble them into functional units. They also build electronic measuring and control components. Precision mechanics use milling, drilling, grinding and honing machines.
Electromechanical equipment assembler: Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test the completed units to guarantee good working order and compliance with specifications and standards.
Avionics technician: Avionics technicians install, test, inspect and adjust electrical and electronic equipment such as navigation, communication and flight control systems in aircraft and spacecraft. They carry out maintenance and repair work. They perform functional tests, diagnose problems and take corrective action.
Motor vehicle body assembler: Motor vehicle body assemblers fasten motor vehicle body parts and components together such as frames, doors, chassis and hoods. They use hand tools, power tools and other equipment such as CNC machines or robots. They read technical plans and use automated assembling equipment to build motor vehicle bodies. They inspect individual parts for malfunctions and check the quality of assemblies to make sure the standards are met and the specifications respected. Motor vehicle body assemblers report any assembly issues to their supervisor.
Application engineer: Application engineers deal with the technical requirements, management, and design for the development of various engineering applications, such as systems, new product designs, or the improvements of processes. They are responsible for the implementation of a design or process improvement, they offer technical support for products, answer questions about the technical functionality and assist the sales team.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

References

1. Use testing equipment – ESCO