Engineering processes

The systematic approach to the development and maintenance of engineering systems.

knowledge

sector-specific

Engineering processes is an essential knowledge of the following occupations:

Biomedical engineer: Biomedical engineers combine knowledge of engineering principles and biological findings for the development of medical treatments, medicaments, and general healthcare purposes. They can develop solutions ranging from the improvement of the components in conventional medicaments up to implants developments, and tissue treatment.
Marine engineering technician: Marine engineering technicians carry out technical functions to help marine engineers with the design, development, manufacturing and testing processes, installation and maintenance of all types of boats from pleasure crafts to naval vessels, including submarines. They also conduct experiments, collect and analyse data and report their findings.
Foundry manager: Foundry managers coordinate and implement short and medium term casting production schedules, and coordinate the development, support and improvement of casting processes, and the reliability efforts of the maintenance and engineering departments. They also partner with ongoing remediation initiatives.
Aerospace engineering technician: Aerospace engineering technicians work with aerospace engineers to operate, maintain and test equipment used on aircraft and spacecraft. They review blueprints and instructions to determine test specifications and procedures. They use software to make sure that parts of a spacecraft or aircraft are functioning properly. They record test procedures and results, and make recommendations for changes.
Commissioning technician: Commissioning technicians work with commissioning engineers to supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning of the equipment, facilities and plants and when necessary they perform repairs and maintenance.
Aircraft engine specialist: Aircraft engine specialists advise on maintaining procedures to engines of aircrafts and helicopters. They perform operability tests to components and parts of aircrafts to diagnose suitability for usage and possible operations to improve performance. They interpret and provide support to understand the technical specifications given by manufacturers for application at the airport’s premises.
Steam engineer: Steam engineers provide energy and utilities to facilities, such as steam, heat and refrigeration. They operate and maintain equipment such as boilers and air compressors, and research and develop new methods and improvements for the provision of utilities.
Medical device engineer: Medical device engineers design and develop medical-technical systems, installations, and equipment such as pacemakers, MRI scanners, and X-ray machines. They monitor the whole manufacturing process from concept design to product implementation. activities undertaken include, among others, designing product improvements, developing methods and techniques to evaluate design suitability, coordinating initial production, developing test procedures, and designing manufacturing diagrams.
Renewable energy engineer: Renewable energy engineers research alternative sources of energy in order to design systems for renewable energy production. They strive to optimise energy production from renewable sources, and reduce production expenses and environmental strain. They design systems which focus on energy sustainability and efficiency.
Rolling stock engineering technician: Rolling stock engineering technicians carry out technical functions to help rolling stock engineers with the design, development, manufacturing and testing processes, installation and maintenance of rail vehicles such as wagons, multiple units, carriages and locomotives. They also conduct experiments, collect and analyse data and report their findings.
Civil engineering technician: Civil engineering technicians help design and execute construction plans and take on organisational tasks, for example in the planning and monitoring, and in bidding and invoicing of construction work. They also calculate material requirements, and help with the purchasing and organising, and ensure the quality of the construction materials. Civil engineering technicians may perform technical tasks in civil engineering and develop and advise on policy implementing strategies for road works, traffic lights, sewerage and water management systems.
Production engineering technician: Production engineering technicians plan production, follow up production processes and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests, conduct tests collect data.
Welding engineer: Welding engineers research and develop optimal effective welding techniques and design the corresponding, equally efficient equipment to aid in the welding process. They also conduct quality control and evaluate inspection procedures for welding activities. Welding engineers have advanced knowledge and critical understanding of welding technology application. They are able to manage high complex technical and professional activities or projects related to welding applications, while also taking responsibility for the decision making process.
Wind energy engineer: Wind energy engineers design and install wind energy farms and equipment. They research and test locations to find the most productive location, test equipment such as wind-turbine blades, and develop strategies for more efficient energy production, and environmental sustainability.
Geological engineer: Geological engineers apply geological knowledge for the assessment of sites, soils, slope stability, sediments and other observable characteristics in the Earth. They integrate this information in the planning and development of projects in those places. They assess and answer questions concerning the geological characteristics of soils by performing research and experiments of the sites aimed to be intervened.
Equipment engineer: Equipment engineers design and maintain the machinery and equipment in manufacturing facilities. They design machinery that adjusts to the manufacturing requirements and processes. Moreover, they envision the maintenance of the machines and equipment for uninterrupted functioning.

Aerospace engineering drafter: Aerospace engineering drafters convert the aerospace engineers’ designs into technical drawings usually using computer-aided design programs. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of aircrafts and spacecrafts.
Automotive designer: Automotive designers create model designs in 2D or 3D and prepare isometric drawings and graphics. They also conduct research collecting data about (new) materials, market trends and production processes.
Component engineer: Component engineers design and envision the engineering development of different small parts composing a bigger project, machine, or process. They ensure that parts are not conflicting from an engineering perspective.
Heating, ventilation, air conditioning engineer: Heating, ventilation, air conditioning engineers design and develop heating, ventilation, air conditioning and possibly refrigeration systems for usage in residences, manufacturing sites, offices, commercial buildings, etc. They strive for solutions that serve the needs of clients and respond to architectural restrictions of sites.
Energy systems engineer: Energy systems engineers supervise the energy conversion and distribution processes. They analyse the energy supply and consumption efficiency developing new ways to improve the existing processes, taking into account both the technical and the financial aspects. They also study the environmental impact of energy usage and combine the production of renewable energy in the current power systems.
Satellite engineer: Satellite engineers develop, test and oversee the manufacture of satellite systems and satellite programmes. They may also develop software programs, collect and research data, and test the satellite systems. Satellite engineers can also develop systems to command and control satellites. They monitor satellites for issues and report on the behaviour of the satellite in orbit.
Rotating equipment engineer: Rotating equipment engineers develop designs and specifications for rotating equipment according to any applicable standards. They also provide technical expertise and help ensure that all new and existing equipment installations are completed.
Marine engineering drafter: Marine engineering drafters convert the marine engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of all types of boats from pleasure crafts to naval vessels, including submarines.
Pneumatic engineering technician: Pneumatic engineering technicians evaluate operating pneumatic systems and assemblies such as compressed air machines, and recommend modifications for more efficiency. They are also involved in the design of pneumatic systems and components such as circuits.
Civil drafter: Civil drafters draw and prepare sketches for civil engineers and architects of architectonic projects of different kinds, topographical maps, or for the reconstruction of existing structures. They lay down in the sketches all the specifications and requirements such as mathematical, aesthetic, engineering, and technical.
Environmental mining engineer: Environmental mining engineers oversee the environmental performance of mining operations. They develop and implement environmental systems and strategies to minimise environmental impacts.
Fisheries refrigeration engineer: Fisheries refrigeration engineers perform maintenance and repair machines and equipment in the fish hold and refrigeration system on board of fishing vessels.
Automotive engineering drafter: Automotive engineering drafters convert the automotive engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of automotive components, cars, buses, trucks and other motor vehicles.
Chemical engineering technician: Chemical engineering technicians transform raw materials in order to develop and test chemical products. They also work on improving chemical plant operations and processes.
Wood technology engineer: Wood technology engineers develop materials and components made of wood, construct production facilities and control and monitor the production. They also examine products and materials and advise customers.
Research engineer: Research engineers combine research skills and knowledge of engineering principles aiming to improve through research, processes, techniques, products, and systems at large. They perform experiments, for instance of natural structures such as honeycombs or tear-resistant spiderwebs, before determining the viability of alternative methods on a larger scale.
Rolling stock engineering drafter: Rolling stock engineering drafters convert the rolling stock engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of rail vehicles such as locomotives, multiple units, carriages and wagons.
Corrosion technician: Corrosion technicians monitor the integrity from a pipeline and provide repairs to it if needed. They ensure that the pipelines are properly connected and are in line with the health and safety regulations. Corrosion technicians inspect cathodic protection systems and pipeline connection points for corrosion. They may also assist in the designing of pipelines, analyse soil and write reports on technical issues.
Product development engineering technician: Product development engineering technicians improve efficiency of product development, set up equipment and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests and collect data.
Solar energy engineer: Solar energy engineers design systems which generate electrical energy from sunlight, such as photovoltaic systems. They design and construct systems which optimise the energy output from solar power, and the sustainability of the production process of solar systems.
Automotive engineering technician: Automotive engineering technicians work with automotive engineers to operate, repair, maintain and test equipment used in motor vehicles. In some environments, such as an airport they are responsible for keeping equipment and vehicles serviceable. They review blueprints and designs to determine test specifications and procedures. Automotive engineering technicians use software to make sure that parts of a motor vehicle are functioning properly. They record test procedures and results, and make recommendations for changes.
Metallurgical manager: Metallurgical managers coordinate and implement short and medium term metallurgical or steel-making production schedules, and coordinate the development, support and improvement of steel-making processes, and the reliability efforts of the maintenance and engineering departments. They also partner with ongoing remediation initiatives.
Language engineer: Language engineers work within the field of computing science, and more specifically in the field of natural language processing. They aim to close the gap in translation between accurate human translations to machine-operated translators. They parse texts, compare and map translations, and improve the linguistics of translations through programming and code.
Materials engineer: Materials engineers research and design new or improved materials for a diverse number of applications. They analyse the composition of materials, conduct experiments, and develop new materials for industry-specific use that can range from rubber, to textiles, glass, metals, and chemicals. They advise companies in damage assessments, quality assurance of materials, and recycling of materials.
Fire prevention and protection engineer: Fire prevention and protection engineers study, design, and developed innovative solutions aimed to the prevention of fire and the protection of people, natural sites, and urban areas. They propose suitable materials for construction, clothing, or other applications and they design detection systems aiming to prevent fire or the propagation of it.

Agricultural engineer: Agricultural engineers intervene in a variety of matters within the agriculture field in combination with engineering concepts. They design and develop machinery and equipment for an efficient and sustainable exploitation of the land. They advise on the use of resources in agricultural sites comprising the usage of water and soil, harvesting methods, and waste management.
Packing machinery engineer: Packing machinery engineers are in charge of and responsible for packaging machinery. They maintain and improve technical standards, analyse results, set up improvement plans, and are responsible for machinery maintenance.
Process engineering technician: Process engineering technicians work closely with engineers to evaluate the existing processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Robotics engineer: Robotics engineers design and develop robotic devices and applications in combination with mechanical engineering principles. They use pre-established designs and current developments for improving or inventing systems, machinery and equipment. They combine several knowledge fields such as computing, engineering, and electronics in the development of new engineering applications.
Military engineer: Military engineers perform technical and scientific functions in the military, such as the development of concepts for military technical equipment, support of the manufacturing of military equipment, and technical research, maintenance, and quality assurance.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Installation engineer: Installation engineers oversee and manage the installing of structures, which take often many years to design and construct. They ensure safety, avoid risks and they aim to the optimalisation of costs. Installation engineers also create constructive designs of systems and perform installation system testing. They determine the material needed for the construction of these systems and the costs, and use CAD software to design these systems.    
Electric power generation engineer: Electric power generation engineers design and develop systems which generate electrical power, and develop strategies for the improvement of existing electricity generation systems. They strive to conciliate sustainable solutions with efficient and affordable solutions. They engage in projects where supply of electrical energy is required.
Naval architect: Naval architects design, build, maintain and repair all types of boats from pleasure crafts to naval vessels, including submarines. They analyse floating structures and take various features into account for their designs such as the form, structure, stability, resistance, access and propulsion of hulls.
Flight test engineer: Flight test engineers work with other systems engineers to plan the tests in detail and to make sure that the recording systems are installed for the required data parameters. They analyse the data collected during test flights and produce reports for individual test phases and for the final flight test. They are also responsible for the safety of the test operations.
Maintenance and repair engineer: Maintenance and repair engineers focus on the optimization of equipment, procedures, machineries and infrastructure. They ensure their maximum availability at minimum costs.
Manufacturing engineer: Manufacturing engineers design manufacturing processes for different kinds of production processes. They integrate those specificities and constraints posed by the industry or the product being produced with general and wide-spread manufacturing engineering principles into the design and planification of manufacturing processes.
Design engineer: Design engineers develop new conceptual and detailed designs. They create the look for these concepts or products and the systems used to make them. Design engineers work with engineers and marketers to enhance the functioning and efficiency of existing devices.
Tooling engineer: Tooling engineers design new tools for manufacturing equipment. They prepare tooling quotation requests. They estimate costs and delivery time, manage tooling construction follow-up and supervise the routine maintenance of tools. They also analyse data to determine the cause of major tooling difficulties and develop recommendations and action plans for solutions.
Gas distribution engineer: Gas distribution engineers design and construct transport systems for natural gas, connecting the gas distribution network to the consumer by designing piping works and mains. They research methods to ensure sustainability, and to decrease environmental impact, as well as optimising cost efficiency.
Rolling stock engineer: Rolling stock engineers design and oversee the manufacturing process and installation of rail vehicles, including locomotives, carriages, wagons and multiple units. They design new trains and electrical or mechanical parts, supervise modifications and resolve technical problems. They also perform routine maintenance duties to ensure that trains are in good condition and meet quality and safety standards.
Hydropower technician: Hydropower technicians install and maintain systems in hydropower plants. They perform inspections, analyse problems and carry out repairs. They ensure the turbines operate in compliance with regulations, and assist the hydropower engineers in the construction of turbines.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Fluid power engineer: Fluid power engineers supervise the assembly, installation, maintenance, and testing of fluid power equipment in accordance with specified manufacturing processes. They create designs with schematics and assembly models, make drawings and bills of materials for components, and analyse equipment.
Aircraft maintenance engineer: Aircraft maintenance engineers make preflight and postflight inspections, adjustments, and minor repairs to ensure safe and sound performance of aircrafts. They inspect aircraft prior to takeoff to detect malfunctions such as oil leaks, electrical or hydraulic problems. They verify passenger and cargo distribution and amount of fuel to ensure that weight and balance specifications are met.
Contract engineer: Contract engineers combine technical knowledge of contracts and legal matters with understanding of engineering specifications and principles. They ensure that both parts are aligned in the development of a project and foresee the compliance of all the engineering specifications and matters as defined in contracts.
Rolling stock engine inspector: Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centers. They review administrative records, analyse the operating performance of engines and report their findings.
Gas production engineer: Gas production engineers develop methods to optimise the extraction and production of gas for energy and utilities. They design systems for gas production, supervise production operations and develop improvements on existing systems.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Motor vehicle engine inspector: Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Automotive engineer: Automotive engineers design and oversee the manufacturing process and operation of motor vehicles such as motorcycles, cars, trucks, buses and their respective engineering systems. They design new vehicles or mechanical parts, supervise modifications and resolve technical problems. They make sure the designs comply with cost specifications and other constraints. They also conduct research studying environmental, energy and safety aspects.
Aircraft maintenance technician: Aircraft maintenance technicians perform preventive maintenance to aircrafts, aircrafts components, engines and assemblies, such as airframes and hydraulic and pneumatic systems. They perform inspections following strict protocols and aviation laws.
Container equipment design engineer: Container equipment design engineers design equipment to contain products or liquids, according to set specifications, such as boilers or pressure vessels. They test the designs, look for solutions to any problems and oversee production.
Nanoengineer: Nanoengineers combine the scientific knowledge of atomic and molecular particles with engineering principles for applications in a varied array of fields. They apply findings in chemistry, biology, and materials engineering, etc. They use technological knowledge for the improvement of existing applications or the creation of micro objects.
Wastewater engineer: Wastewater engineers design sewage systems and networks for the removal and treatment of wastewater from cities and other residential areas. They design systems which are compliant with environmental standards, and aim to minimise impact on the ecosystem and on citizens in the vicinity of the network.
Precision engineer: Precision engineers design processes, machines, fixtures and other equipment that have exceptionally low engineering tolerances, are repeatable and stable over time. They ensure prototypes are built and tested and make sure the designs meet system specifications and operational requirements.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Aerodynamics engineer: Aerodynamics engineers perform aerodynamics analysis to make sure the designs of transport equipment meet aerodynamics and performance requirements. They contribute to designing engine and engine components, and issue technical reports for the engineering staff and customers. They coordinate with other engineering departments to check that designs perform as specified. Aerodynamics engineers conduct research to assess adaptability of equipment and materials. They also analyse proposals to evaluate production time and feasibility.
Health and safety engineer: Health and safety engineers design objects and programs by combining engineering principles and health and safety requirements. They envision the protection and well-being of the people using designed objects or performing work under designed health and safety programs. They assess facilities and the risks that they might pose (e.g. contaminant materials, ergonomics, handling of dangerous substances, etc.) in order to design and improve health and safety measures.

Engineering processes is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Quarry engineer: Quarry engineers analyse which extraction methods such as excavating, drilling and blasting are most suited to extract raw materials from the ground. They develop plans before a new quarry is opened, assessing if the quarry is profitable. Quarry engineers manage the everyday operations in a quarry, create and maintain progress reports, oversee the staff, ensure health and safety and assess the environmental impact a quarry has on its environment.
Integration engineer: Integration engineers develop and implement solutions which coordinate applications across the enterprise or its units and departments. They evaluate existing components or systems to determine integration requirements and ensure that the final solutions meet organisational needs. They reuse components when possible and assist management in taking decisions. They perform ICT system integration troubleshooting.
Embedded system designer: Embedded system designers translate and design requirements and the high-level plan or architecture of an embedded control system according to technical software specifications.
Product development manager: Product development managers coordinate the development of new products from beginning to end. They receive briefings and start envisioning the new product considering design, technical and cost criteria. They conduct research on market needs and create prototypes of new products for untapped market opportunities. Product development managers also improve and boost technological quality.
Ergonomist: Ergonomists analyse the design of equipment, furniture, and systems in order to improve it toward safer, healthier, and more efficient ones. They strive to improve the interaction of people with equipment and the environment.
Utilities inspector: Utilities inspectors examine products, systems and machiney such as sewer, water, gas or electric turbines ensuring they are built and functioning according to regulations. They write inspection reports and provide recommendations to improve the systems and repair the broken components.

Marine surveyor: Marine surveyors inspect vessels intended for operations in maritime or open sea waters. They ensure that vessels and equipment follow the regulations laid down by the International Maritime Organisation (IMO). They may also act as third parties for the review of offshore facilities and construction projects.
Surveying technician: Surveying technicians carry out technical surveying tasks. They assist surveyors, architects or engineers in surveying related technical tasks such as mapping land, creating construction drawings and operating precise measuring equipment
Manufacturing manager: Manufacturing managers plan, oversee and direct the manufacturing process in an organisation. They ensure products and services are efficiently produced within the timeframe and budget given.
Numerical tool and process control programmer: Numerical tool and process control programmers develop computer programs to control automatic machines and equipment involved in manufacturing processes. They analyse blueprints and job orders, conduct computer simulations and trial runs.
Product assembly inspector: Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. They use measuring and testing equipment to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They also provide detailed inspection documentation and recommend action where problems are discovered.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Aircraft gas turbine engine overhaul technician: Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the engines using engine-specific tooling.
Chief information officer: Chief information officers define and implement the ICT strategy and governance. They determine necessary resources for the ICT strategy implementation, anticipate ICT market evolutions and company business needs. They contribute to the development of the organisation’s strategic plan and ensure that the ICT infrastructure supports the organisation’s overall operations and priorities.
Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Soil surveying technician: Soil surveying technicians analyse soil by carrying out technical surveying tasks, using soil surveying techniques. They focus on the process of classifying soil types and other soil properties. Soil surveying technicians operate surveying equipment and utilise programs to retrieve and interpret relevant data, and perform computations as required.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Industrial tool design engineer: Industrial tool design engineers design various industrial tools in accordance with customer needs, manufacturing requirements, and building specifications. They test the designs, look for solutions to any problems, and oversee production.
Engineering assistant: Engineering assistants ensure the administration and monitoring of technical and engineering files for projects, assignments, and quality matters. They assist engineers with their experiments, participate in site visits, and administer the collection of information.
ICT system administrator: ICT system administrators are responsible for the upkeep, configuration, and reliable operation of computer and network systems, servers, workstations and peripheral devices. They may acquire, install, or upgrade computer components and software; automate routine tasks; write computer programs; troubleshoot; train and supervise staff; and provide technical support. They ensure optimum system integrity, security, backup and performance.
Aircraft de-icer installer: Aircraft de-icer installers assemble, install, test, maintain and repair mechanical de-icing and anti-icing systems that prevent ice accumulation or formation on aircrafts and spacecrafts.
Drafter: Drafters prepare and create technical drawings using a special software or manual techniques, to show how something is built or works.
ICT product manager: ICT product managers analyse and define current and target status for ICT products, services or solutions. They estimate the cost effectiveness, points of risk, opportunities, strengths and weaknesses of products or services provided. ICT product managers create structured plans and establish time scales and milestones, ensuring optimisation of activities and resources.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Wood factory manager: Wood factory managers realise planning, commercial and advisory tasks of wood factory and timber trade. They also manage purchasing, sales, customer service and marketing of wood and wood products.
ICT system integration consultant: ICT system integration consultants advise on bringing together different systems to interoperate within an organisation for enabling data sharing and reducing redundancy.

Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Marine chief engineer: Marine chief engineers are responsible for the entire technical operations of the vessel including engineering, electrical, and mechanical divisions. They are the head of the entire engine department aboard the ship. They have overall responsibility for all technical operations and equipment on-board the ship. Marine chief engineers collaborate on security, survival and health care on board, observe the national and international standards of application.
Electromechanical equipment assembler: Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test the completed units to guarantee good working order and compliance with specifications and standards.
Avionics technician: Avionics technicians install, test, inspect and adjust electrical and electronic equipment such as navigation, communication and flight control systems in aircraft and spacecraft. They carry out maintenance and repair work. They perform functional tests, diagnose problems and take corrective action.
ICT operations manager: ICT operations managers coordinate ICT services and infrastructure ensuring that the organisation has the required infrastructural resources. They also plan and monitor stages of either a business process or a computer process, negotiate contracts and take mitigation action in case of non-fulfilment of agreements. They oversee the day-to-day tasks involving infrastructure components, ICT systems and software.
Motor vehicle body assembler: Motor vehicle body assemblers fasten motor vehicle body parts and components together such as frames, doors, chassis and hoods. They use hand tools, power tools and other equipment such as CNC machines or robots. They read technical plans and use automated assembling equipment to build motor vehicle bodies. They inspect individual parts for malfunctions and check the quality of assemblies to make sure the standards are met and the specifications respected. Motor vehicle body assemblers report any assembly issues to their supervisor.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

References

1. Engineering processes – ESCO