Monitor the product temperature using the available tools and measuring instruments and adjust furnace temperature if needed.
measurement of furnace temperature
measuring product temperature
measure temperature of furnace
measuring of furnace temperature
measuring temperature of furnace
measurement of temperature of product
furnace temperature measurement
measuring of product temperature
measurement of product temperature
measure temperature of product
measuring furnace temperature
measuring temperature of product
product temperature measurement
measurement of temperature of furnace
Skill reusability level
Relationships with occupations
Measure furnace temperature is an essential skill of the following occupations:
Wave soldering machine operator: Wave soldering machine operators set up and operate machines to solder electronic components to the printed circuit board. They read blueprints and layout designs.
Incinerator operator: Incinerator operators tend incineration machines which burn refuse and waste. They ensure the equipment is maintained, and that the incineration process occurs in accordance with safety regulations for the incineration of waste.
Wood drying kiln operator: Wood drying kiln operators control the process of applying heat to moist or ‘green’ wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Plastic heat treatment equipment operator: Plastic heat treatment equipment operators manipulate plastic products using machinery such as furnaces or flame-hardening machines in order to temper, anneal or heat-treat. They set up the machinery and read the production instructions to determine the furnace temperature. Plastic heat treatment equipment operators remove products from machines, let them cool down, examine and test products to see if they conform to specifications.
Metal furnace operator: Metal furnace operators monitor the process of making metal before it is cast into forms. They control metal making furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, loading vessels, and adding iron, oxygen, and other additives to be melted into the desired metal composition. They control the chemicothermal treatment of the metal in order to reach the standards. In case of observed faults in the metal, they notify the authorised personnel and participate in the removal of the fault.
Coking furnace operator: Coking furnace operators monitor the operation of a usually automatic industrial oven that takes in crushed, washed, and blended bituminous coal and heats it to temperatures between 1000 and 2000 °C without the presence of oxygen in order to obtain cokes. The finished cokes are then quenched with water or air and prepared for transport.
Measure furnace temperature is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.
Wood fuel pelletiser: Wood fuel pelletisers operate a hammer mill to turn wood waste products into pellets for use as fuel. The milled product is afterward pressed through a die, producing the standardised shape and size of a pellet.
Fibre machine tender: Fibre machine tenders operate and maintain extrusion machines that form sliver from filaments. They work with synthetic materials such as fiberglass or liquid polymer or non-synthetic materials such as rayon.
Engineered wood board machine operator: Engineered wood board machine operators work with machines to bond particles or fibres made from wood or cork. Various industrial glues or resins are applied to obtain fibre board, particle board or cork board.
- Measure furnace temperature – ESCO