Monitor gauge

Oversee the data presented by a gauge concerning the measurement of pressure, temperature, thickness of a material, and others.

monitor metered and associated data
check gauge
supervise gauge
monitor gauges
oversee gauge
monitor gauge data

skill/competence

cross-sector

Monitor gauge is an essential skill of the following occupations:

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Slate mixer: Slate mixers operate and maintain slate mixing machines that mix multicolored slate granules used for asphalt-coated roofing felt surfacing.
Fossil-fuel power plant operator: Fossil-fuel power plant operators operate and maintain industrial equipment, such as generators, turbines and boilers, that provides electricity produced from fossil fuels like natural gas or coal. They ensure the safety of operations and that the equipment complies with legislation. They may also work in combined cycle power plants which use heat recovery systems to recover exhaust heat from one operation and activate steam turbines.
Solderer: Solderers operate various equipment and machinery such as gas torches, soldering irons, welding machines, or electric-ultrasonic equipment in order to solder together two or more items (usually metals), by melting and forming a metal filler in between the joints, the filler metal has a lower melting point than the adjoining metal. 
Pipeline pump operator: Pipeline pump operators tend pump equipment and systems to transfer liquids and substances (e.g. such as chemical solutions, crude oil, gases, and others) from one point to the next. They operate hoses, pumps, and other equipment according to the good to be transferred. They ensure smooth circulation and flow of the goods in the pipelines.
Boiler operator: Boiler operators maintain heating systems such as low-pressure boilers, high-pressure boilers and power boilers. They work mostly in large buildings like power plants or boiler rooms and ensure a safe and environmentally friendly operation of boiler systems.
Plastic and rubber products manufacturing supervisor: Plastic and rubber products manufacturing supervisors manage and coordinate the activities of personnel involved in plastic or rubber products manufacturing, making sure the production is efficiently, safely and cost-effectively processed. They are responsible for the installation of new production lines and for the provision of trainings.
Surface grinding machine operator: Surface grinding machine operators set up and tend surface grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by an abrasive grinding wheel, or wash grinder, rotating on a horizontal or vertical axis.
Cylindrical grinder operator: Cylindrical grinding operators set up and tend cylindrical grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by multiple abrasive grinding wheels with diamond teeth as a cutting device for very precise and light cuts, as the workpiece is fed past it and formed into a cylinder.
Injection moulding operator: Injection moulding operators operate and monitor injection moulding machines, in order to cast products from thermoplastic materials. They regulate the temperature, pressure, and volume of plastic, according to pre-defined specifications. Injection moulding operators also remove finished products and cut-away excess material, using a knife or other hand tools.
Oxy fuel burning machine operator: Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece’s created kerf as slag.
Debarker operator: Debarker operators operate debarking machines to strip harvested trees of their bark. The tree is fed into the machine, after which the bark is stripped using abrasion or cutting.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Brazier: Braziers operate various equipment and machinery such as torches, soldering irons, fluxes and welding machines in order to join two metal pieces together, by heating, melting and forming a metal filler inbetween them, often brass or copper. Brazing can join metals such as aluminum, silver, copper, gold, and nickel. Brazing is a similar process to soldering but requires higher temperatures. 

 
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Vacuum forming machine operator: Vacuum forming machine operators tend, control, and maintain machines that heat sheets of plastic before moving them around a mould, using vacuum-suction; when these sheets become cool, they are permanently set in the shape of the mould.
Fibreglass machine operator: Fibreglass machine operators control and maintain the machine that sprays a mix of resin and glass fibers onto products such as bathtubs or boat hulls to obtain strong and lightweight composite end-products.
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Filament winding operator: Filament winding operators tend, control and maintain machines that coat filament, usually fibreglass or carbon, in resin and wind them around a rotation mould to produce pipes, containers, tubes and other hollow cylindrical products.
Pipeline compliance coordinator: Pipeline compliance coordinators track, compile and summarise all the compliance and conformance activities in pipeline infrastructures and fields. They ensure that works are carried out within regulatory frameworks. They strive to develop and implement compliance policies and recommend ways to minimize risk. They inspect sites, collect evidence, and report compliance needs to the management.
Blow moulding machine operator: Blow moulding machine operators operate and monitor blow moulding machine to mould plastic goods, according to requirements. They regulate temperature, air pressure and volume of plastic, according to specifications. Blow moulding machine operators remove finished products and cut away excess material, using a knife. They regrind surplus material and rejected workpieces for reuse, using a grinding machine.
Coking furnace operator: Coking furnace operators monitor the operation of a usually automatic industrial oven that takes in crushed, washed, and blended bituminous coal and heats it to temperatures between 1000 and 2000 °C without the presence of oxygen in order to obtain cokes. The finished cokes are then quenched with water or air and prepared for transport.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Cake press operator: Cake press operators set up and tend the hydraulic presses that compress and bake plastic chips into cake moulds to produce plastic sheets. They regulate and adjust the pressure and temperature.
Chipper operator: Chipper operators tend machines that chip wood into small pieces for use in particle board, for further processing into pulp, or for use in its own right. Wood is fed into the chipper and shredded or crushed using a variety of mechanisms.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Fibre machine tender: Fibre machine tenders operate and maintain extrusion machines that form sliver from filaments. They work with synthetic materials such as fiberglass or liquid polymer or non-synthetic materials such as rayon.
Pulp technician: Pulp technicians perform technical tasks in the production of pulp. They work in pulp production teams where they maintain machines, resolve technical malfunctions and ensure the production process runs according to specifications.
Pultrusion machine operator: Pultrusion Machine Operators tend, control, and maintain machines which enable the production of composite materials with consistent cross-sections by adding reinforcement fibres such as fibreglass to the existing material and coating the resulting material with resin; this then is pulled through a heated dye where it becomes cured.
Laser beam welder: Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat source that allows for precise welding.
Glass beveller: Glass bevellers measure, cut, assemble and install flat glass and mirrors. They also load and unload glass, mirrors and equipment, drive to installation sites, install metal or wood frameworks that need to be fitted with glass, and work according to client specifications.
Dry press operator: Dry press operators press dry tempered clay or silica into bricks and other shapes. They select and fix the pressing dies, using rule and wenches. Dry press operators remove the bricks from the press machine and stack them in a specified pattern on the kiln car.
Electron beam welder: Electron beam welders set up and tend machines designed to join separate metal workpieces together through the use of a high-velocity electron beam. They monitor the machining processes providing an alteration in the kinetic energy of the electrons that allows for them to transform into heat for the metal to melt and join together in a process of precise welding.
Compression moulding machine operator: Compression moulding machine operators set up and operate machines to mould plastic products, according to requirements. They select and install dies on press. Compression moulding machine operators weigh the amount of premixed compound needed and pour it into the die well. They regulate the temperature of dies.
Power plant control room operator: Power plant control room operators are responsible for the safe and proper operation of power plants, switchyards and associated control structures. They repair and maintain the involved machinery and equipment to ensure the plant’s efficient operation and to tackle emergency situations such as blackouts.

Monitor gauge is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Coating machine operator: Coating machine operators set up and tend coating machines that coat metal products with a thin layer of covering of materials such as lacquer, enamel, copper, nickel, zinc, cadmium, chromium or other metal layering in order to protect or decorate the metal products’ surfaces. They run all coating machine stations on multiple coaters.
Hydraulic forging press worker: Hydraulic forging press workers set up and tend hydraulic forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of compressive forces generated by a piston and fluid pressure.
Tissue paper perforating and rewinding operator: Tissue paper perforating and rewinding operators tend a machine that takes in tissue paper, perforates it, and rolls it up to create various types of sanitary paper.
Casting machine operator: Casting machine operators operate casting machines to manipulate metal substances into shape. They set up and tend casting machines to process molten ferrous and non-ferrous metals to manufacture metal materials. They conduct the flow of molten metals into casts, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.
Paper cutter operator: Paper cutter operators tend a machine that cuts paper to the desired size and shape. Paper cutters may also cut and perforate other materials that come in sheets, such as metal foil.
Paper pulp moulding operator: Paper pulp moulding operators tend a machine that moulds paper pulp in various shapes, usually for use in lightweight but sturdy packaging material, such as egg boxes.
Abrasive blasting operator: Abrasive blasting operators use the proper equipment and machinery to smoothen rough surfaces by abrasive blasting. Abrasive blasting is commonly used in the finishing process of metal workpieces and for blasting building materials used in masonry such as bricks, stones and concrete. They operate blasters or sand cabinets which forcibly thrust a stream of abrasive material such sand, soda or water, under high pressure, propelled by a centrifigal wheel, in order to shape and smoothen surfaces.
Bleacher operator: Bleacher operators tend a machine that bleaches wood pulp to serve in the production of white paper. Different bleaching techniques are used to complement the various pulping methods, and to obtain different grades of whiteness.
Auger press operator: Auger press operators control and adjust an auger-press in order to perform clay forming, extrusion and cutting operations on products according to specifications.
Wood drying kiln operator: Wood drying kiln operators control the process of applying heat to moist or ‘green’ wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Paper machine operator: Paper machine operators tend a machine that takes in pulp slurry, spread it out over a screen, and drains out the water. The drained slurry is then pressed and dried to produce paper.
Paper embosing press operator: Paper embossing press operators use a press to raise or recess certain areas of the medium, so as to create relief on the print. Two matching engraved dies are placed around the paper and pressure is applied to change the surface of the material.
Metal furnace operator: Metal furnace operators monitor the process of making metal before it is cast into forms. They control metal making furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, loading vessels, and adding iron, oxygen, and other additives to be melted into the desired metal composition. They control the chemicothermal treatment of the metal in order to reach the standards. In case of observed faults in the metal, they notify the authorised personnel and participate in the removal of the fault.
Metal annealer: Metal annealers operate electric or gas kilns to soften metal so it can be cut and shaped more easily. They heat the metal to a specific temperature and / or colour and then slowly cool it, both according to specifications. Metal annealers inspect the metals through the entire process to observe any flaws.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Boilermaker: Boilermakers operate a variety of equipment and machinery to create, repipe and retube hot water and steam boilers, producing them in all steps of the production process. They cut, gouge and shape the metal sheets and tubes for the boilers to size, using oxy-acetylene gas torches, assemble them by shielded metal arc welding, gas metal arc welding or gas tungsten arc welding, and finish them by the approprate machine tools, power tools and coating.
Froth flotation deinking operator: Froth flotation deinking operators tend a tank that takes in recycled paper and mixes it with water. The solution is brought to a temperature around 50°C Celsius, after which air bubbles are blown into the tank. The air bubbles lift ink particles to the surface of the suspension and form a froth that is then removed.
Book-sewing machine operator: Book-sewing machine operators tend a machine that stitches paper together to form a volume. They check that signatures are inserted the right way and the machine does not jam.
Gravure press operator: Gravure press operators work with gravure presses, where the image is engraved directly on a roll. They set up the press and monitor it during the operation, taking care of safety and resolving problems.
Wash deinking operator: Wash deinking operators operate a tank where recycled paper is mixed with water and dispersants to wash out printing inks. The solution, called a pulp slurry, is then dewatered to flush out the dissolved inks.
Plastic rolling machine operator: Plastic rolling machine operators operate and monitor machines to produce plastic rolls, or to flatten and reduce the material. They examine raw materials and finished products to make sure they are according to specifications.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Laminating machine operator: Laminating machine operators tend a machine that applies a plastic layer to paper to strenghten it and protect it from wetness and stains.
Glass annealer: Glass annealers operate electric or gas kilns used to strengthen the glass products by a heating-cooling process, making sure the temperature is set according to specifications. They inspect the glass products  through the entire process to observe any flaws.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Heat treatment furnace operator: Heat treatment furnace operators monitor the process of heat treatment of castings. They control the treatment furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, and loading vessels. They control the chemicothermal treatment of castings in order to reach the standards.
Drill press operator: Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Hot foil operator: Hot foil operators tend machines which apply a metallic foil on other materials using pressure cylinders and heating. They also mix colors, set up the appropriate machinery equipment and monitor printing.
Electroplating machine operator: Electroplating machine operators set up and tend electroplating machines designed to finish and coat the metal workpieces’ (such as future pennies and jewelry) surface by using electric current to dissolve metal cations and to bond a thin layer of another metal, such as zinc, copper or silver, to produce a coherent metal coating to the workpiece’s surface.
Mechanical forging press worker: Mechanical forging press workers set up and tend mechanical forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of preset, compressive forces provided by cranks, cams and toggles at reproducible strokes.
Print folding operator: Print folding operators tend a machine that folds paper and bundles of paper.
Spring maker: Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring.
Digester operator: Digester operators, or cooks, cook wood chips with soda ash or acid to separate the wood pulp from unwanted constituents. They test the resulting solution.
Foundry moulder: Foundry moulders manufacture cores for metal moulds, which are used to fill a space in the mould that must remain unfilled during casting. They use wood, plastic or other materials to create the core, selected to withstand the extreme environment of a metal mould.
Absorbent pad machine operator: Absorbent pad machine operators tend a machine that takes in cellulose fibres and compresses them to a highly absorbent pad material for use in hygienic products such as diapers and tampons.
Dip tank operator: Dip tank operators set up and tend dip tanks, which are coating machines, designed to provide otherwise finished work pieces with durable coating by dipping them in a tank of a specific sort of paint, preservative or molten zinc.
Pulp control operator: Pulp control operators operate and monitor multi-function process control machinery and equipment to control the processing of wood, scrap pulp, recycable paper and other cellulose materials in the production of pulp. They set up, operate and maintain the machinery, analyse the production results and adjust the process when necessary.
Foundry operative: Foundry operative manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into moulds, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.
Anodising machine operator: Anodising machine operators set up and tend anodising machines designed to provide otherwise finished metal workpieces, usually aluminum-based, with a durable, anodic oxide, corrosion-resistant finishing coat, by a electrolyctic passiviation process that increases the thickness of the natural oxide layer of the metal workpieces’ surface.
Tool and die maker: Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce these tools in all steps of the production process. They design the tools and dies, then cut and shape them to size and finish them by manually operated machine tools, power tools, hand tools, or programming and tending CNC tool and die making machines.
Blacksmith: Blacksmiths heat metal, usually steel, in a forge and shape it with a hammer, chisel, and an anvil. Contemporarily, they predominantly create artisanal metal products, including ornamental work, as well as horse shoes, one of the sole metal fabricating processes that has not been industrialised.

References

1. Monitor gauge – ESCO