Record production data for quality control

Keep records of the machine’s faults, interventions and irregularities for quality control.

keep records of production data for quality control
file production data for quality control
file machinery fault statistics for quality assurance
evidence record machinery fault statistics for quality assurance
chronicle machinery fault statistics for quality assurance
document production data for quality control
document machinery fault statistics for quality assurance
chronicle production data for quality control
evidence record production data for quality control

skill/competence

cross-sector

Record production data for quality control is an essential skill of the following occupations:

Machine operator supervisor: Machine operator supervisors coordinate and direct workers who set up and operate machines. They monitor the production process and the flow of materials, and they make sure that the products meet the requirements.
Asphalt plant operator: Asphalt plant operators extract raw materials such as sand and stones and operate mobile equipment for their transport to the plant. They tend automated machines to crush and sort out stones, and to mix the sand and stones with asphalt cement. They take samples to check the quality of the mix and arrange for its transport to the construction site.
Boilermaker: Boilermakers operate a variety of equipment and machinery to create, repipe and retube hot water and steam boilers, producing them in all steps of the production process. They cut, gouge and shape the metal sheets and tubes for the boilers to size, using oxy-acetylene gas torches, assemble them by shielded metal arc welding, gas metal arc welding or gas tungsten arc welding, and finish them by the approprate machine tools, power tools and coating.
Metal production supervisor: Metal production supervisors oversee the day-to-day working process and activities of the labourers in a metal fabrication factory. They supervise staff, create work schedules, maintain a safe work environment and serve as the first, most accessible management representative for the workers to contact when there is need.
Pulp technician: Pulp technicians perform technical tasks in the production of pulp. They work in pulp production teams where they maintain machines, resolve technical malfunctions and ensure the production process runs according to specifications.
Welding coordinator: Welding coordinators supervise the workflow of welding applications. They monitor welding processes performed by other welders, supervise the staff, being sometimes responsible for vocational training. They also weld particularly demanding parts. Welding coordinators ensure that the necessary welding equipment is ready for usage. They mostly coordinate welding applications and related professional activities.
Welding inspector: Welding inspectors examine the connections and bonds between metals. They utilise visual tools and electrical instruments to inspect and ensure the quality and safety of connections. Welding inspectors ensure that all related welding activities, plans and materials follow the appropriate guidelines, in accordance with safety regulations. In addition to working in the field completing their examinations of welding projects, inspectors spend time in an office setting compiling their reports.
Industrial quality manager: Industrial quality managers monitor and control information assets by detailing processes and procedures to ensure compliance with industrial standards. They perform audits in industrial processes, advise on preventive and corrective actions, and ensure compliance with industrial standards.

Record production data for quality control is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Container equipment assembly supervisor: Container equipment assembly supervisors monitor the assembly process of containers such as boilers or pressure vessels. They train and coach the workers involved in the assembly to achieve production goals.
Table saw operator: Table saw operators work with industrial saws that cut with a rotating circular blade. The saw is built into a table. The operator sets the height of the saw to control the depth of the cut. Particular attention is paid to safety, as factors such as natural stresses within the wood may produce unpredictable forces.
Flexographic press operator: Flexographic press operators use flexographic relief plate to print on almost any material. The relief plate is inked and pressed onto the material to be printed.
Riveter: Riveters assemble several metal parts together by riveting guns, rivet set and hammers, or by operating a riveting machine that all perform the purpose of drilling holes on the rivet shank of the metal part and of inserting rivets, bolts, into these holes in order to fasten them together.
Hydraulic forging press worker: Hydraulic forging press workers set up and tend hydraulic forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of compressive forces generated by a piston and fluid pressure.
Tissue paper perforating and rewinding operator: Tissue paper perforating and rewinding operators tend a machine that takes in tissue paper, perforates it, and rolls it up to create various types of sanitary paper.
Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Coquille casting worker: Coquille casting workers manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into coquilles, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Ammunition assembler: Ammunition assemblers put together explosives and other ammunition components. They perform this work in mass production in ammunition factories. The production itself focuses on the manufacturing of cartridges or projectiles.
Engraving machine operator: Engraving machine operators set up, programme, and tend engraving machines designed to precisely carve a design in the surface of a metal workpiece by a diamond stylus on the mechanical cutting machine that creates small, separate printing dots existing from cut cells. They read engraving machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the precise engraving controls, such as the depth of the incisions and the engraving speed.
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Tumbling machine operator: Tumbling machine operators set up and operate tumbling machines, often wet or drie tumbling barrels, designed to remove excess material and burrs of heavy metal workpieces and precious metals and to improve surface appearance, by rotating the metal pieces in a barrel together with grit and potentially water, allowing for the friction between the pieces mutually and with the grit to cause a rounding, smooth effect.
Grinding machine operator: Grinding machine operators set up, program and control grinding machines, designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by using an abrasive wheel with diamond teeth as a cutting device for very precise and light cuts. They read grinding machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the grinding controls, such as the depth of cuts and the rotation speed.
Water jet cutter operator: Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or an abrasive substance mixed with water.
Veneer slicer operator: Veneer slicer operators slice lumber into thin sheets to be used as a cover for other materials, such as particle board or fibre board. Veneer slicers may use various machines to obtain different cuts of wood: a rotary lathe to produce cuts peripendicular to the growth rings, a slicing machine to create plank-like cuts, or a half-round lathe which gives the operator the freedom to make a selection of the most interesting cuts.
Metal furniture machine operator: Metal furniture machine operators use machines and power tools to cut, shape and join metal pieces in order to produce metal furniture ranging from office furnishings to outdoors fittings. They use different types of metal such as aluminium, iron and stainless steel, and different types of processes such as metal forming and casting. They polish, apply protective layers and, in some cases, decorative finishes to the metal pieces. They assemble and join the elements to obtain the final product.
Lacquer maker: Lacquer makers operate and maintain laquers and syntetic paints mixers and jar mills, making sure the end product is according to formula.
Paper cutter operator: Paper cutter operators tend a machine that cuts paper to the desired size and shape. Paper cutters may also cut and perforate other materials that come in sheets, such as metal foil.
Heat sealing machine operator: Heat sealing machine operators operate sealing and gluing machines to join items together for further processing or to seal products or packages, using heat.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Engineered wood board grader: Engineered wood board graders inspect finished engineered wood products for quality issues such as inclomplete gluing, warping or blemishing. They also test load bearing qualities of the wood. Graders sort products for quality according to guidelines.
Paper pulp moulding operator: Paper pulp moulding operators tend a machine that moulds paper pulp in various shapes, usually for use in lightweight but sturdy packaging material, such as egg boxes.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Wood sander: Wood sanders smoothen the surface of a wooden object using various sanding instruments. Each applies an abrasive surface, usually sandpaper, to the workpiece to remove irregularities.
Production supervisor: Production supervisors coordinate, plan and direct manufacturing and production processes. They are responsible for reviewing production schedules or orders as well as dealing with staff in these production areas.
Bleacher operator: Bleacher operators tend a machine that bleaches wood pulp to serve in the production of white paper. Different bleaching techniques are used to complement the various pulping methods, and to obtain different grades of whiteness.
Planer thicknesser operator: Planer thicknesser operators use machinery to shave wood planks to a uniform thickness. The machine usually planes both sides of the plank in one operation. They feed the plank into the machine carefully to prevent excess planing at the edge known as ‘snipe’.
Wood drying kiln operator: Wood drying kiln operators control the process of applying heat to moist or ‘green’ wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Edge bander operator: Edge bander operators tend machines that veneer materials, mostly wood, to increase durability and make them aesthetically pleasing. They also regulate the speed of the belt, set temperature control to regulate heat, brush glue on edges of panels and start and regulate the machine.
Bindery operator: Bindery operators tend machines that bind printed or unprinted paper into volumes using staples, twine, glue or other binding technologies.
Drawing kiln operator: Drawing kiln operators are responsible for continuous sheet flat glass production by manipulating the drawing kiln that processes molten glass.
Insulating tube winder: Insulating tube winders set up and operate a machine to wind up insulating tubes and cut them to specified dimensions.
Paper machine operator: Paper machine operators tend a machine that takes in pulp slurry, spread it out over a screen, and drains out the water. The drained slurry is then pressed and dried to produce paper.
Filing machine operator: Filing machine operators set up and tend filing machines such as band files, reciprocating files and bench filing machines in order to smoothen metal, wood or plastic surfaces by precisely cutting and removing small amounts of excess material.
Paper embosing press operator: Paper embossing press operators use a press to raise or recess certain areas of the medium, so as to create relief on the print. Two matching engraved dies are placed around the paper and pressure is applied to change the surface of the material.
Metal furnace operator: Metal furnace operators monitor the process of making metal before it is cast into forms. They control metal making furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, loading vessels, and adding iron, oxygen, and other additives to be melted into the desired metal composition. They control the chemicothermal treatment of the metal in order to reach the standards. In case of observed faults in the metal, they notify the authorised personnel and participate in the removal of the fault.
Canvas goods assembler: Canvas goods assemblers construct products made from a closely woven fabrics and leather such as tents, bags or wallets. Artists also use it as painting surface.
Plastic products assembler: Plastic products assemblers fit and fasten parts and finished plastic products according to strictly-defined procedures. Plastic products assemblers may also cut and shape plastic parts using hand, power, and machine tools.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Oxy fuel burning machine operator: Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece’s created kerf as slag.
Debarker operator: Debarker operators operate debarking machines to strip harvested trees of their bark. The tree is fed into the machine, after which the bark is stripped using abrasion or cutting.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Digital printer: Digital printers work with machines that print directly to the medium, without an intervening plate. Digital printers usually use laser or inkjet technology to print individual pages without lengthy or labour intensive technical steps intervening between the finished digital product and the print.
Lathe and turning machine operator: Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved by computer-controlled motors. They read lathe and turning machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the lathe controls, such as the depth of cuts and the rotation speed.
Envelope maker: Envelope makers tend a machine that takes in paper and executes the steps to creat envelopes: cut and fold the paper and glue it, then apply a weaker food-grade glue to the flap of the envelope for the consumer to seal it.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Paper mill supervisor: Paper mill supervisors coordinate and monitor the operations at a paper mill during production of products such as corrugated board, cardboard boxes or padded envelopes. They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness can be achieved. They have a clear overview of ongoing processes, and take quick decisions to resolve problems.
Wood fuel pelletiser: Wood fuel pelletisers operate a hammer mill to turn wood waste products into pellets for use as fuel. The milled product is afterward pressed through a die, producing the standardised shape and size of a pellet.
Paper stationery machine operator: Paper stationery machine operators work with machines that perform one or more operations on paper to make it suitable for specific markets, such as punching holes, perforating, creasing, and collating with a carbon coated sheet.
Froth flotation deinking operator: Froth flotation deinking operators tend a tank that takes in recycled paper and mixes it with water. The solution is brought to a temperature around 50°C Celsius, after which air bubbles are blown into the tank. The air bubbles lift ink particles to the surface of the suspension and form a froth that is then removed.
Paper bag machine operator: Paper bag machine operators tend a machine that takes in paper, folds it and glues it to produce paper bags of various sizes, shapes, and grades of strength.
Laser marking machine operator: Laser marking machine operators set up and tend laser marking or engraving machines designed to precisely carve a design in the surface of a metal workpiece by use of a moving controller and an engraving laser beam point attached to it that traces patterns on the metal workpiece’s surface. They make adjustments to the machine in terms of laser beam intensity, direction and speed of movement. They also ensure the laser table, used to perform laser machine engravings on and guides the laser beam, is properly set up.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Thread rolling machine operator: Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die against metal blank rods, creating a larger diameter than those of the original blank workpieces.
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Wood boring machine operator: Wood boring machine operators use milling machines or specialise boring jigs to cut holes in wood workpieces. Wood boring differs from routing mainly in that the main movement is into the workpiece as opposed to across its surface.
Wood products assembler: Wood products assemblers put together products from premade pieces of wood. They operate machines, often hydraulic, that bind the various elements of a product together using joints, glue or other fasteners. Assemblers put the elements in place, operate the machine and look out for problems.
Book-sewing machine operator: Book-sewing machine operators tend a machine that stitches paper together to form a volume. They check that signatures are inserted the right way and the machine does not jam.
Gravure press operator: Gravure press operators work with gravure presses, where the image is engraved directly on a roll. They set up the press and monitor it during the operation, taking care of safety and resolving problems.
Plastic furniture machine operator: Plastic furniture machine operators tend plastic processing machines that produce pieces such as plastic chairs and tables. They inspect each resulting product, detect abnormalities and remove inadequate pieces. In some cases, they may assemble different plastic parts to obtain the final product.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Sawmill operator: Sawmill operators work with automated lumber mill equipment which saws timber into rough lumber. They also handle various sawing machines which further process the lumber in various shapes and sizes. These processes are nowadays often computer controlled.
Automated assembly line operator: Automated assembly line operators operate, maintain and clean production machines. They are responsible for the assembly of a whole product or a part of a product. Automated assembly line operators perform all tasks in a production process via a rotation system.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Wash deinking operator: Wash deinking operators operate a tank where recycled paper is mixed with water and dispersants to wash out printing inks. The solution, called a pulp slurry, is then dewatered to flush out the dissolved inks.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Laminating machine operator: Laminating machine operators tend a machine that applies a plastic layer to paper to strenghten it and protect it from wetness and stains.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Slitter operator: Slitter operators set up, operate, or tend machines, in order to cut, slit, bend, or straighten sheets of metal, paper, or other materials to specific widths. Slitter operators must also ensure quality, by examining various end-products and observing pre-defined tolerances.
Production potter: Production potters process and form clay, by hand or by using the wheel, into end-products pottery, stoneware products, earthenware products and porcelain. They introduce the already shaped clay into kilns, heating them at a high temperature in order to remove all the water from the clay.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Router operator: Router operators set up and operate multi-spindle routing machines, in order to hollow-out or cut various hard materials such as wood, composites, aluminium, steel, plastics; and others, such as foams. They are also able to read blueprints to determine cutting locations and specific sizes.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Milling machine operator: Milling machine operators set up, program and control milling machines, designed to cut excess material from metal workpieces using a computer-controlled rotary-cutting, milling cutter. They read milling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the depth of cuts or the rotation speed.
Optical disc moulding machine operator: Optical disc moulding machine operators tend moulding machines that melts polycarbonate pellets and inject the plastic into a mould cavity. The plastic is then cooled and solidifies, bearing the marks that can be digitally read.
Heat treatment furnace operator: Heat treatment furnace operators monitor the process of heat treatment of castings. They control the treatment furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, and loading vessels. They control the chemicothermal treatment of castings in order to reach the standards.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Straightening machine operator: Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle and the height of the straightening rolls and select the settings for the pressing force required to straighten the workpiece, taking into account the end product’s yield strenght and size, without excess work hardening.
Wood pallet maker: Wood pallet makers create wood pallets for use in storage, shipping and manipulation of goods. Pallet makers operate a machine that takes in usually low-grade softwood planks treated with heat or chemicals and nails them together. The material and shape of the pallets, the treatment methods, and the number and pattern of nails used are all highly standardised to make exchange of used pallets possible.
Band saw operator: Band saw operators work with industrial saws that feature a continuous flexible blade revolving around two or more wheels. Band saws are most effective at producing irregular shapes.
Screen printer: Screen printers tend a press that presses ink through a screen. Industrial screen printing is often used to print on materials that are hard to use with other processes, like rigid plastic surfaces.
Drill press operator: Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Woodturner: Woodturners use a lathe to remove superfluous material from wood. The lathe turns the workpiece around its axis, as shape tools are used to obtain the desired shape.
Hot foil operator: Hot foil operators tend machines which apply a metallic foil on other materials using pressure cylinders and heating. They also mix colors, set up the appropriate machinery equipment and monitor printing.
Lumber grader: Lumber graders inspect lumber, or wood cut into planks. They test the lumber, look for irregularities and grade the wood based on quality and desirability of the pattern.

References

1. Record production data for quality control – ESCO