Deburring machine operator

Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.

Deburring machine operators are employed full time. Some work more than 40 hours per week. Because many manufacturers run their machinery for extended periods, evening and weekend work is also common.

These workers often operate powerful, high-speed machines that can be dangerous and must observe safety rules. Operators usually wear protective equipment, such as safety glasses, earplugs, and steel-toed boots, to guard against flying particles of metal or plastic, machine noise, and heavy objects, respectively.

Other required safety equipment varies by work setting and machine. For example, respirators are common for those who work near materials that emit dangerous fumes or dust.

The following job titles also refer to deburring machine operator:

deburring and tooling machine technician
burr bench operator
burring wheel operative
tooling machine technician
deburr machine operative
burr tooling operator
burr bench hand
deburring and tooling machine operator
tooling machine operator
burring wheel technician
burring wheel operator
burring bench operator
deburrer

A high school diploma is generally required to work as a deburring machine operator. On-the-job training is usually provided by the employers.

ISCO skill level is defined as a function of the complexity and range of tasks and duties to be performed in an occupation. It is measured on a scale from 1 to 4, with 1 the lowest level and 4 the highest, by considering:

• the nature of the work performed in an occupation in relation to the characteristic tasks and duties
• the level of formal education required for competent performance of the tasks and duties involved and
• the amount of informal on-the-job training and/or previous experience in a related occupation required for competent performance of these tasks and duties.

Deburring machine operator is a Skill level 2 occupation.

These occupations, although different, require a lot of knowledge and skills similar to deburring machine operator.

surface grinding machine operator
cylindrical grinder operator
metal polisher
boring machine operator
laser marking machine operator

These occupations require some skills and knowledge of deburring machine operator. They also require other skills and knowledge, but at a higher ISCO skill level, meaning these occupations are accessible from a position of deburring machine operator with a significant experience and/or extensive training.

automated assembly line operator
pulp control operator
metal production supervisor
industrial robot controller
welding inspector

This knowledge should be acquired through learning to fulfill the role of deburring machine operator.

• Quality and cycle time optimisation: The most optimal rotation or cycle time and over-all quality of a tool or a machine’s processes.
• Types of metal: Qualities, specifications, applications and reactions to different fabricating processes of various types of metal, such as steel, aluminium, brass, copper and others.
• Deburring processes: The various types of processes removing burrs from fabricated workpieces, such as grinding, media blasting, sanding, mass-finishing, spindle finishing, electrochemical deburring, abrasive flow machining, manual deburring, and others.
• Quality standards: The national and international requirements, specifications and guidelines to ensure that products, services and processes are of good quality and fit for purpose.
• Deburring machine parts: The various parts of a machine designed for removing remaining edges on a workpiece after processing and smoothening, such as an abrasaive or deburring brush, deburring drum, dust extraction hood, powerful magnet, and others.
• Types of deburring brush: Types of abrasive brushes used in the deburring process, their qualities and applications, such as a twisted-in-wire brush, tube brush, power brush, wheel brush, cup brush and mandrel mounted brush.

These skills are necessary for the role of deburring machine operator.

• Supply machine with appropriate tools: Supply the machine with the necessary tools and items for a particular production purpose. Monitor the stock and replenish when needed.
• Remove inadequate workpieces: Evaluate which deficient processed workpieces do not meet the set-up standard and should be removed and sort the waste according to regulations.
• Troubleshoot: Identify operating problems, decide what to do about it and report accordingly.
• Remove processed workpiece: Remove individual workpieces after processing, from the manufacturing machine or the machine tool. In case of a conveyor belt this involves quick, continuous movement.
• Tend deburring machine: Tend a metalworking machine designed to remove excessive edges from a workpiece by applying deburring, abrasive machine processes, monitor and operate it according to regulations.
• Monitor moving workpiece in a machine: Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.
• Perform test run: Perform tests putting a system, machine, tool or other equipment through a series of actions under actual operating conditions in order to assess its reliability and suitability to realise its tasks, and adjust settings accordingly.
• Dispose of cutting waste material: Dispose of possibly hazardous waste material created in the cutting process, such as swarf, scrap and slugs, sort according to regulations, and clean up workplace.
• Monitor conveyor belt: Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.
• Ensure equipment availability: Ensure that the necessary equipment is provided, ready and available for use before start of procedures.
• Monitor automated machines: Continuously check up on the automated machine’s set-up and execution or make regular control rounds. If necessary, record and interpret data on the operating conditions of installations and equipment in order to identify abnormalities.
• Supply machine: Ensure the machine is fed the necessary and adequate materials and control the placement or automatic feed and retrieval of work pieces in the machines or machine tools on the production line.
• Smooth burred surfaces: Inspect and smooth burred surfaces of steel and metal parts.
• Set up the controller of a machine: Set up and give commands to a machine by dispatching the appropriate data and input into the (computer) controller corresponding with the desired processed product.

This knowledge is sometimes, but not always, required for the role of deburring machine operator. However, mastering this knowledge allows you to have more opportunities for career development.

• Non-ferrous metal processing: Various processing methods on non-ferrous metals and alloys such as copper, zinc and aluminium.
• Cutting technologies: The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.
• Manufacturing of metal structures: The production of metal structures for construction.
• Manufacturing of cutlery: The manufacture of different cutlery items, such as forks, spoons, knives, razors or scissors.
• Ferrous metal processing: Various processing methods on iron and iron-containing alloys such as steel, stainless steel and pig iron.
• Manufacturing of metal household articles: The manufacture of flatware , hollowware , dinnerware and other non-electrical utensils for use at the table or in the kitchen.
• Manufacturing of small metal parts: The manufacture of metal cable, plaited bands and other articles of that type, uninsulated or insulated cable not capable of being used as a conductor of electricity, coated or cored wire as well as barbed wire, wire fencing, grill, netting, cloth etc. Manufacture of coated electrodes for electric arc-welding, nails and pins, chain and springs (except watch springs): as well as leaves for springs.
• Manufacturing of metal containers: The manufacture of reservoirs, tanks and similar containers of metal, of types normally installed as fixtures for storage or manufacturing use. The manufacture of metal containers for compressed or liquefied gas.
• Manufacturing of metal assembly products: The manufacture of rivets, washers and similar non-threaded products, screw machine products, screws, nuts and similar threaded products.
• Manufacturing of steel drums and similar containers: The manufacture of pails, cans, drums, buckets, boxes, through metalworking processes.
• Manufacturing of heating equipment: The manufacture of electrical ovens and water heaters by metalworking processes.
• Types of metal manufacturing processes: Metal processes linked to the different types of metal, such as casting processes, heat treatment processes, repair processes and other metal manufacturing processes.
• Manufacturing of door furniture from metal: The manufacture of metal items that can be attached to a door in order to support its function and appearance. The manufacture of padlocks, locks, keys, hinges and the like, and hardware for buildings, furniture, vehicles etc.
• Manufacturing of light metal packaging: The manufacture of tins and cans for food products, collapsible tubes and boxes, and of metallic closures.
• Manufacturing of doors from metal
• Manufacturing of weapons and ammunition: The manufacture of heavy weapons (artillery, mobile guns, rocket launchers, torpedo tubes, heavy machine guns), small arms (revolvers, shotguns, light machine guns), air or gas guns and pistols, and war ammunition. Also the manufacture of hunting, sporting or protective firearms and ammunition and of explosive devices such as bombs, mines and torpedoes.
• Metal smoothing technologies: The various technologies used for the smoothening, polishing and buffing of fabricated metal workpieces.
• Manufacturing of tools: The manufacture of knives and cutting blades for machines or for mechanical appliances, hand tools such as pliers, screwdrivers etc. The manufacture of non-power-driven agricultural hand tools, saws and saw blades, including circular saw blades and chainsaw blades. The manufacture of interchangeable tools for hand tools, whether or not power-operated, or for machine tools: drills, punches, milling cutters etc. The manufacture of press tools, moulding boxes and moulds (except ingot moulds), vices and clamps, and blacksmiths’ tools: forges, anvils etc.
• Abrasive machining processes: The various machining principles and processes employing abrasives, (mineral) materials that can shape a workpiece by eroding excessive parts of it, such as grinding, honing, sanding, buffing, diamond wire cutting, polishing, abrasive blasting, tumbling, water-jet cutting, and others.
• Manufacturing of steam generators: The manufacture of steam or other vapour generators, the manufacture of auxiliary plant for use with steam generators: condensers, economisers, superheaters, steam collectors and accumulators. The manufacture of nuclear reactors, parts for marine or power boilers. Also the production of pipe system construction comprising further processing of tubes generally to make pressure pipes or pipe systems together with the associated design and construction work.

These skills and competences are sometimes, but not always, required for the role of deburring machine operator. However, mastering these skills and competences allows you to have more opportunities for career development.

• Inspect quality of products: Use various techniques to ensure the product quality is respecting the quality standards and specifications. Oversee defects, packaging and sendbacks of products to different production departments.
• Record production data for quality control: Keep records of the machine’s faults, interventions and irregularities for quality control.
• Spot metal imperfections: Observe and identify various kinds of imperfections in metal workpieces or finished products. Recognise the best fitted manner of fixing the problem, which could be caused by corrosion, rust, fractures, leaks, and other signs of wear.
• Operate precision measuring equipment: Measure the size of a processed part when checking and marking it to check if it is up to standard by use of two and three dimensional precision measuring equipment such as a caliper, a micrometer, and a measuring gauge.
• Wear appropriate protective gear: Wear relevant and necessary protective gear, such as protective goggles or other eye protection, hard hats, safety gloves.
• Perform machine maintenance: Perform regular maintenance, possibly including corrections and alterations, on a machine or machine tool to ensure it remains in a proper productive state.
• Provide advice to technicians: Offer advice to service technicians in case of machinery malfunctions and other technical repair tasks.
• Apply precision metalworking techniques: Comply with precision standards specific to an organisation or product in metalworking, involved in processes such as engraving, precise cutting, welding.
• Consult technical resources: Read and interpret technical resources such as digital or paper drawings and adjustment data in order to properly set up a machine or working tool, or to assemble mechanical equipment.
• Measure flatness of a surface: Measure the evenness of a workpiece’s surface after it has been processed by checking for deviations from the desired perpendicular state.
• Keep records of work progress: Maintain records of the progress of the work including time, defects, malfunctions, etc.

8122 – Metal finishing, plating and coating machine operators

---

References

1. ESCO
2. U.S. Bureau of Labor Statistics
3. Deburrer Job Description – Chron.com