Monitor conveyor belt

Monitor the flow of the work pieces on the conveyor belt as they are processed by the machine to ensure optimal productivity.

oversee production line
oversee conveyor belt
watch over conveyor belt
supervise conveyor belt
supervise production line
guard production line
watch over production line
guard conveyor belt

skill/competence

cross-sector

Monitor conveyor belt is an essential skill of the following occupations:

Tissue paper perforating and rewinding operator: Tissue paper perforating and rewinding operators tend a machine that takes in tissue paper, perforates it, and rolls it up to create various types of sanitary paper.
Paper pulp moulding operator: Paper pulp moulding operators tend a machine that moulds paper pulp in various shapes, usually for use in lightweight but sturdy packaging material, such as egg boxes.
Production supervisor: Production supervisors coordinate, plan and direct manufacturing and production processes. They are responsible for reviewing production schedules or orders as well as dealing with staff in these production areas.
Envelope maker: Envelope makers tend a machine that takes in paper and executes the steps to creat envelopes: cut and fold the paper and glue it, then apply a weaker food-grade glue to the flap of the envelope for the consumer to seal it.
Paper bag machine operator: Paper bag machine operators tend a machine that takes in paper, folds it and glues it to produce paper bags of various sizes, shapes, and grades of strength.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Automated assembly line operator: Automated assembly line operators operate, maintain and clean production machines. They are responsible for the assembly of a whole product or a part of a product. Automated assembly line operators perform all tasks in a production process via a rotation system.
Wood pallet maker: Wood pallet makers create wood pallets for use in storage, shipping and manipulation of goods. Pallet makers operate a machine that takes in usually low-grade softwood planks treated with heat or chemicals and nails them together. The material and shape of the pallets, the treatment methods, and the number and pattern of nails used are all highly standardised to make exchange of used pallets possible.
Absorbent pad machine operator: Absorbent pad machine operators tend a machine that takes in cellulose fibres and compresses them to a highly absorbent pad material for use in hygienic products such as diapers and tampons.
Cotton gin operator: Cotton gin operators perform ginning operations for separating cotton fibres from the seeds. They tend bale presses and remove the processed bales from the gin. They perform machine maintenance and ensure smooth running of processing operations.
Corrugator operator: Corrugator operators tend a machine which folds a sheet of heavy paper in a wave-like pattern and covers it on both sides to create a lightweight, sturdy material suitable for packaging.
Paperboard products assembler: Paperboard products assemblers construct the components or parts made from paperboard according to strictly laid down procedures. They assemble products such as tubes, spools, cardboard boxes, paper plates and craft boards.

Monitor conveyor belt is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Coating machine operator: Coating machine operators set up and tend coating machines that coat metal products with a thin layer of covering of materials such as lacquer, enamel, copper, nickel, zinc, cadmium, chromium or other metal layering in order to protect or decorate the metal products’ surfaces. They run all coating machine stations on multiple coaters.
Hydraulic forging press worker: Hydraulic forging press workers set up and tend hydraulic forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of compressive forces generated by a piston and fluid pressure.
Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Moulding machine operator: Moulding machine operators operate machines that are part of the production process of moulds for the manufacturing of castings or other moulded materials. They tend the mouldmaking machines that use the appropriate materials such as sand, plastics, or ceramics to obtain the moulding material. They may then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of moulded products such as ferrous and non-ferrous metal castings.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Planer thicknesser operator: Planer thicknesser operators use machinery to shave wood planks to a uniform thickness. The machine usually planes both sides of the plank in one operation. They feed the plank into the machine carefully to prevent excess planing at the edge known as ‘snipe’.
Bindery operator: Bindery operators tend machines that bind printed or unprinted paper into volumes using staples, twine, glue or other binding technologies.
Paper machine operator: Paper machine operators tend a machine that takes in pulp slurry, spread it out over a screen, and drains out the water. The drained slurry is then pressed and dried to produce paper.
Metal annealer: Metal annealers operate electric or gas kilns to soften metal so it can be cut and shaped more easily. They heat the metal to a specific temperature and / or colour and then slowly cool it, both according to specifications. Metal annealers inspect the metals through the entire process to observe any flaws.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Manufacturing facility manager: Manufacturing facility managers foresee the maintenance and routine operational planning of buildings intended to be used for manufacturing activities. They control and manage health and safety procedures, supervise the work of contractors, plan and handle buildings maintenance operations, fire safety and security issues, and oversee buildings’ cleaning activities.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Thread rolling machine operator: Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die against metal blank rods, creating a larger diameter than those of the original blank workpieces.
Metal production supervisor: Metal production supervisors oversee the day-to-day working process and activities of the labourers in a metal fabrication factory. They supervise staff, create work schedules, maintain a safe work environment and serve as the first, most accessible management representative for the workers to contact when there is need.
Wood boring machine operator: Wood boring machine operators use milling machines or specialise boring jigs to cut holes in wood workpieces. Wood boring differs from routing mainly in that the main movement is into the workpiece as opposed to across its surface.
Book-sewing machine operator: Book-sewing machine operators tend a machine that stitches paper together to form a volume. They check that signatures are inserted the right way and the machine does not jam.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Spot welder: Spot welders set up and tend spot welding machines designed to press and join metal workpieces together. The metal resistance to the passage of electrical current and the subsequent heat created in the process allows for the local melting and joining of the parts.  
Glass annealer: Glass annealers operate electric or gas kilns used to strengthen the glass products by a heating-cooling process, making sure the temperature is set according to specifications. They inspect the glass products  through the entire process to observe any flaws.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Screen printer: Screen printers tend a press that presses ink through a screen. Industrial screen printing is often used to print on materials that are hard to use with other processes, like rigid plastic surfaces.
Chain making machine operator: Chain making machine operators tend and operate the proper equipment and machinery for the creation of metal chains, including precious metal chains such as for jewellery, and produce these in all steps of the production process. They feed the wire into the chainmaking machine, use pliers to hook the ends of the chain formed by the machine together and finish and trim the edges by soldering them to a smooth surface.
Mechanical forging press worker: Mechanical forging press workers set up and tend mechanical forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of preset, compressive forces provided by cranks, cams and toggles at reproducible strokes.
Mineral crushing operator: Mineral crushing operators operate and monitor crushers and other machines to crush materials and minerals. They move stones to the crushers, fill the machines with minerals, monitor the crushing process and ensure that the end products meet requirements.
Print folding operator: Print folding operators tend a machine that folds paper and bundles of paper.
Glass forming machine operator: Glass forming machine operators operate and maintain machines that press or blow molten glass in moulds to form or shape products, such as neons, bottles, jars and drinking glasses. They set up and adjust machines, and weigh, measure and check production samples to check conformity to the set specifications.
Punch press operator: Punch press operators set up and tend punch presses designed to cut workpieces into their desired shape by propelling a hydraulic ram to punch holes into them with a single die set that pushes through the top dead centre, through the surface, and to the bottom dead centre of the workpiece.

References

1. Monitor conveyor belt – ESCO