Monitor moving workpiece in a machine

Monitor the processing of a workpiece in motion, such as a piece of metal or wood moved linearly over a static manufacturing machine.

supervise moving workpiece in a machine
oversee moving workpiece in a machine
audit moving workpiece in a machine
oversee operating machine and appliances
audit operating machine and appliances
supervise operating machine and appliances
manage operating machine and appliances
manage moving workpiece in a machine

skill/competence

cross-sector

Monitor moving workpiece in a machine is an essential skill of the following occupations:

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Coating machine operator: Coating machine operators set up and tend coating machines that coat metal products with a thin layer of covering of materials such as lacquer, enamel, copper, nickel, zinc, cadmium, chromium or other metal layering in order to protect or decorate the metal products’ surfaces. They run all coating machine stations on multiple coaters.
Tumbling machine operator: Tumbling machine operators set up and operate tumbling machines, often wet or drie tumbling barrels, designed to remove excess material and burrs of heavy metal workpieces and precious metals and to improve surface appearance, by rotating the metal pieces in a barrel together with grit and potentially water, allowing for the friction between the pieces mutually and with the grit to cause a rounding, smooth effect.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Surface grinding machine operator: Surface grinding machine operators set up and tend surface grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by an abrasive grinding wheel, or wash grinder, rotating on a horizontal or vertical axis.
Cylindrical grinder operator: Cylindrical grinding operators set up and tend cylindrical grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by multiple abrasive grinding wheels with diamond teeth as a cutting device for very precise and light cuts, as the workpiece is fed past it and formed into a cylinder.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Automated assembly line operator: Automated assembly line operators operate, maintain and clean production machines. They are responsible for the assembly of a whole product or a part of a product. Automated assembly line operators perform all tasks in a production process via a rotation system.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Chain making machine operator: Chain making machine operators tend and operate the proper equipment and machinery for the creation of metal chains, including precious metal chains such as for jewellery, and produce these in all steps of the production process. They feed the wire into the chainmaking machine, use pliers to hook the ends of the chain formed by the machine together and finish and trim the edges by soldering them to a smooth surface.
Spring maker: Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring.
Metal polisher: Metal polishers use metal working equipment and machinery to polish and buff almost finished metal workpieces in order to enhance their smoothness and appearance and to remove oxidisation, tarnishing the metal after the other fabrication processes. They may operate equipment using diamond solutions, silicon-made polishing pads, or working wheels with a leather polishing strop, and tend to these materials ensuring their effectiveness.
Swaging machine operator: Swaging machine operators set up and tend rotary swaging machines, designed to alter round ferrous and non-ferrous metal workpieces into their desired shape by first hammering them into a smaller diameter through the compressive force of two or more dies and then tagging them using a rotary swager, a process through which no excess material is lost.

Monitor moving workpiece in a machine is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Filing machine operator: Filing machine operators set up and tend filing machines such as band files, reciprocating files and bench filing machines in order to smoothen metal, wood or plastic surfaces by precisely cutting and removing small amounts of excess material.
Jewellery polisher: Jewellery polishers ensure that finished jewellery pieces are cleaned by customer demand or prepared for sale. They may also perform minor repairs. They use either hand tools such as files and emery paper buff sticks and/or hand held polishing machines. They also use mechanised polishing machines such as barrel polishers. 
Tool and die maker: Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce these tools in all steps of the production process. They design the tools and dies, then cut and shape them to size and finish them by manually operated machine tools, power tools, hand tools, or programming and tending CNC tool and die making machines.

References

1. Monitor moving workpiece in a machine – ESCO