Cutting technologies

The variety of cutting technologies, such as software or mechanics, guiding cutting processes through lasering, sawing, milling etc.

cutting technology mechanisation
cutting technology automation
hi tech cutting technology
cutting technology machinery
hi tech cutting
cutting machinery
cutting mechanisation
cutting automation

knowledge

cross-sector

Cutting technologies is an essential knowledge of the following occupations:

Table saw operator: Table saw operators work with industrial saws that cut with a rotating circular blade. The saw is built into a table. The operator sets the height of the saw to control the depth of the cut. Particular attention is paid to safety, as factors such as natural stresses within the wood may produce unpredictable forces.
Planer thicknesser operator: Planer thicknesser operators use machinery to shave wood planks to a uniform thickness. The machine usually planes both sides of the plank in one operation. They feed the plank into the machine carefully to prevent excess planing at the edge known as ‘snipe’.
Tool grinder: Tool grinder perform precision grinding processes on metal objects and tools. They grind, sharpen or smoothen metal surfaces using the appropriate tools and instruments. Tool grinders follow tooling instructions and assure the processed workpiece meets the necessary specifications.
Sawmill operator: Sawmill operators work with automated lumber mill equipment which saws timber into rough lumber. They also handle various sawing machines which further process the lumber in various shapes and sizes. These processes are nowadays often computer controlled.
Band saw operator: Band saw operators work with industrial saws that feature a continuous flexible blade revolving around two or more wheels. Band saws are most effective at producing irregular shapes.
Wood router operator: Wood router operators work with industrial routers to cut wood into the desired shape. Routers have a routing head that moves over the wood, going up and down to regulate the depth of the incision. Contemporary industrial wood routers usually are computer controlled for extremely fine and consistent results.

Cutting technologies is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Boring machine operator: Boring machine operators prepare, operate, and maintain single or multiple spindle machines using a boring bar with a hardened, rotary, multipointed cutting tool in order to enlarge an existing hole in a fabricated workpiece. 
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Grinding machine operator: Grinding machine operators set up, program and control grinding machines, designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by using an abrasive wheel with diamond teeth as a cutting device for very precise and light cuts. They read grinding machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the grinding controls, such as the depth of cuts and the rotation speed.
Water jet cutter operator: Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or an abrasive substance mixed with water.
Veneer slicer operator: Veneer slicer operators slice lumber into thin sheets to be used as a cover for other materials, such as particle board or fibre board. Veneer slicers may use various machines to obtain different cuts of wood: a rotary lathe to produce cuts peripendicular to the growth rings, a slicing machine to create plank-like cuts, or a half-round lathe which gives the operator the freedom to make a selection of the most interesting cuts.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Industrial arts vocational teacher: Industrial arts vocational teachers instruct students in their specialised field of study, industrial arts, which is predominantly practical in nature. They provide theoretical instruction in service of the practical skills and techniques the students must subsequently master for an industrial arts-related profession, working with wood and metal, such as carpenter or sheet metal worker. Industrial arts vocational teachers monitor the students’ progress, assist individually when necessary, and evaluate their knowledge and performance on the subject of industrial arts through assignments, tests and examinations.
Surface grinding machine operator: Surface grinding machine operators set up and tend surface grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by an abrasive grinding wheel, or wash grinder, rotating on a horizontal or vertical axis.
Cylindrical grinder operator: Cylindrical grinding operators set up and tend cylindrical grinding machines designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by multiple abrasive grinding wheels with diamond teeth as a cutting device for very precise and light cuts, as the workpiece is fed past it and formed into a cylinder.
Filing machine operator: Filing machine operators set up and tend filing machines such as band files, reciprocating files and bench filing machines in order to smoothen metal, wood or plastic surfaces by precisely cutting and removing small amounts of excess material.
Sheet metal worker: Sheet metal workers in construction use sheet metal to construct roofs, ducts for heating, ventilation and air-conditioning, gutters and other metal structures. They read plans and determine the type and amount of materials to be used, then measure, bend, cut, shape, and attach pieces of sheet metal to create the required structure.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Oxy fuel burning machine operator: Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece’s created kerf as slag.
Debarker operator: Debarker operators operate debarking machines to strip harvested trees of their bark. The tree is fed into the machine, after which the bark is stripped using abrasion or cutting.
Boilermaker: Boilermakers operate a variety of equipment and machinery to create, repipe and retube hot water and steam boilers, producing them in all steps of the production process. They cut, gouge and shape the metal sheets and tubes for the boilers to size, using oxy-acetylene gas torches, assemble them by shielded metal arc welding, gas metal arc welding or gas tungsten arc welding, and finish them by the approprate machine tools, power tools and coating.
Lathe and turning machine operator: Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved by computer-controlled motors. They read lathe and turning machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the lathe controls, such as the depth of cuts and the rotation speed.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Structural ironworker: Structural ironworker in construction install iron elements into structures. They erect steel frameworks for buildings, bridges and other construction projects. They set metal rods, or rebar, to form reinforced concrete.
Wooden furniture machine operator: Wooden furniture machine operators run machines that manufacture wooden furniture parts, according to the established operating procedure. They ensure the machine works smoothly and repair parts if necessary.
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Wood boring machine operator: Wood boring machine operators use milling machines or specialise boring jigs to cut holes in wood workpieces. Wood boring differs from routing mainly in that the main movement is into the workpiece as opposed to across its surface.
Deburring machine operator: Deburring machine operators set up and tend mechanical deburring machines designed to strip metal workpieces of their rough edges, or burrs, by hammering over their surfaces in order to smoothen them or to roll over their edges in case of uneven slits or sheers in order to flatten them into the surface.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Milling machine operator: Milling machine operators set up, program and control milling machines, designed to cut excess material from metal workpieces using a computer-controlled rotary-cutting, milling cutter. They read milling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the depth of cuts or the rotation speed.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Drill press operator: Drill press operators set up and operate drill presses designed to cut excess material from or enlarge a hole in a fabricated workpiece using a hardened, rotary, multipointed cutting tool that inserts the drill into the workpiece axially.
Woodturner: Woodturners use a lathe to remove superfluous material from wood. The lathe turns the workpiece around its axis, as shape tools are used to obtain the desired shape.
Laser cutting machine operator: Laser cutting machine operators set up, program and tend laser cutting machines, designed to cut, or rather burn off and melt, excess material from a metal workpiece by directing a computer-motion-controlled powerful laser beam through laser optics. They read laser cutting machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the intensity of the laser beam and its positioning.
Wood production supervisor: Wood production supervisors monitor processes involved in the conversion of felled trees into usable lumber. They follow the production process and make quick decisions to resolve problems. ​They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness, can be achieved.
Metal product quality control inspector: Metal product quality control inspectors perform preventive and operational quality control on the metal products. They examine the materials at various stages to make sure it conforms to the desired standard, test the products, and send them back for repair if necessary.
Ornamental metal worker: Ornamental metal workers use finishing equipment and machinery to shape and finish fabricated ornamental metal workpieces, often used for the installation process in construction, such as railings, staircases, open steel flooring, fences and gates, and others.
Drilling machine operator: Drilling machine operators set up, program and control drilling machines, designed to drill holes in workpieces using a computer-controlled, rotary-cutting, multipointed cutting tool, inserted into the workpiece axially. They read drilling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the drilling controls, such as the depth of drills or the rotation speed.
Tool and die maker: Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce these tools in all steps of the production process. They design the tools and dies, then cut and shape them to size and finish them by manually operated machine tools, power tools, hand tools, or programming and tending CNC tool and die making machines.
Punch press operator: Punch press operators set up and tend punch presses designed to cut workpieces into their desired shape by propelling a hydraulic ram to punch holes into them with a single die set that pushes through the top dead centre, through the surface, and to the bottom dead centre of the workpiece.

References

1. Cutting technologies – ESCO