Monitor manufacturing quality standards

Monitor quality standards in manufacturing and finishing process.

quality standards checking in manufacturing
monitor quality standards in manufacturing
monitoring manufacturing quality standards
checking quality standards in manufacturing
monitoring quality standards in manufacturing
manufacturing quality standards monitoring
checking of manufacturing quality standards
check quality standards in manufacturing
manufacturing quality standards checking
monitoring of manufacturing quality standards
checking manufacturing quality standards
quality standards monitoring in manufacturing

skill/competence

cross-sector

Monitor manufacturing quality standards is an essential skill of the following occupations:

Chemical production manager: Chemical production managers are responsible for the technical coordination and control of the chemical production processes. They steer one or more manufacturing units and oversee the implementation of technical and human means, within the framework of objectives of volume, quality and planning. Chemical production managers design and ensure that the production plans and schedules are met. They are responsible for implementation of the processes designed to ensure quality of the manufactured product, good working conditions and environmental practices, and safety of the workplace.
Pharmaceutical quality specialist: Pharmaceutical quality specialists perform inspections and precision measurements in order to test and ensure the quality of pharmaceutical products. They are involved in the whole development phase of a pharmaceutical product until it is ready for the market. This includes the process of acquiring clinical trial licences, advising the pharmaceutical development staff on regulatory requirements and evaluating the content of the package leaflet and other documentation on the product. Moreover, pharmaceutical quality specialists collect and evaluate information on side effects of the product and communicate this knowledge both internally and to the relevant authorities.
Semiconductor processor: Semiconductor processors manufacture electronic semiconductors as well as semiconductor devices, such as microchips or integrated circuits (IC’s). They may also repair, test, and review the products. Semiconductor processors work in cleanrooms and therefore need to wear a special lightweight outfit that fits over their clothing to prevent particles from contaminating their worksite.
Chemical metallurgist: Chemical metallurgists are involved in the extraction of useable metals from ores and recycleable material. They study the properties of metal, such as corrosion and fatigue.
Machine operator supervisor: Machine operator supervisors coordinate and direct workers who set up and operate machines. They monitor the production process and the flow of materials, and they make sure that the products meet the requirements.
Engineered wood board grader: Engineered wood board graders inspect finished engineered wood products for quality issues such as inclomplete gluing, warping or blemishing. They also test load bearing qualities of the wood. Graders sort products for quality according to guidelines.
Pulp grader: Pulp graders grade paper pulp based on a number of possible criteria, such as pulping process, raw materials, bleaching methods, yield, and fibre length.
Electrical equipment assembler: Electrical equipment assemblers are responsible for the assembly of electrical equipment. They assemble product components and wiring according to the blueprints.
Optical instrument production supervisor: Optical instrument production supervisors coordinate, plan and direct the optical instrument production process. They make sure the optical glass is processed properly and optical equipment is assembled according to specifications. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Battery test technician: Battery test technicians use positive and negative wired plugs to test battery’s resistance capacity. They also test rejected batteries to determine their flaws.
Process metallurgist: Process metallurgists study the characteristics of ores including copper, nickel and iron ores and the performance of various metals and alloys. 
Product quality inspector: Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline. They observe, measure, test, and form questions in order to fill in forms and present levels of compliance with comments after the inspection process. Product quality inspectors are employed or work externally for companies.
Electronic equipment assembler: Electronic equipment assemblers are responsible for the assembly of electronic equipment and systems. They assemble electronic components and wiring according to blueprints and assembly drawings. They may assist in quality inspection and equipment maintenance.
Electromechanical engineer: Electromechanical engineers design and develop equipment and machinery that use both electrical and mechanical technology. They make draughts and prepare documents detailing the material requisitions, the assembly process and other technical specifications. Electromechanical engineers also test and evaluate the prototypes. They oversee the manufacturing process.
Electronics production supervisor: Electronics production supervisors coordinate, plan and direct the electronics production process. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Chemical processing plant controller: Chemical processing plant controllers control the chemical production process. They operate machines and systems, being responsible to monitor and maintain the equipment and the instruments in control.
Heat treatment furnace operator: Heat treatment furnace operators monitor the process of heat treatment of castings. They control the treatment furnaces and direct all activities of furnace operation, including the interpretation of computer data, temperature measurement and adjustment, and loading vessels. They control the chemicothermal treatment of castings in order to reach the standards.
Chemical tester: Chemical testers are responsible for the rapid on-the-spot analysis of steel test pieces incoming from the metal production shop for the purpose of timely corrections of the chemical composition of the liquid metal.
Mechatronics engineer: Mechatronics engineers design and develop intelligent systems, such as robotic devices, smart home appliances, and aeroplanes, through combining technologies from mechanical, electronic, computer, and control engineering. They create blueprints or design documents for parts, assemblies or finished products using software programs, and also oversee and manage projects.
Lumber grader: Lumber graders inspect lumber, or wood cut into planks. They test the lumber, look for irregularities and grade the wood based on quality and desirability of the pattern.
Electrical equipment production supervisor: Electrical equipment production supervisors coordinate, plan and direct the production process of electrical equipment. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Product quality controller: Product quality controllers check the quality of manufactured products. They work in manufacturing facilities where they perform basic inspection and evaluation of products before, during or after the production process. They track production problems and send inferior or malfunctioning items back for repair.
Veneer grader: Veneer graders inspect slices of veneer for quality. They look for irregularities, blemishes and production errors, and grade the slices for the desirability of the patterns.
Automation engineer: Automation engineers research, design, and develop applications and systems for the automation of the production process. They implement technology and reduce, whenever applicable, human input to reach the full potential of industrial robotics. Automation engineers oversee the process and ensure all systems run safely and smoothly.
Metal product quality control inspector: Metal product quality control inspectors perform preventive and operational quality control on the metal products. They examine the materials at various stages to make sure it conforms to the desired standard, test the products, and send them back for repair if necessary.
Product grader: Product graders perform preventive and operational quality control on products and rescources. They inspect, grade and evaluate the materials at various stages to make sure it conforms to the desired standard, and send the product back for repair or improvement if necessary. They work in companies and industrial facilities to ensure the produced commodities achieve quality standards.
Chemical manufacturing quality technician: Chemical manufacturing quality technicians perform inspections and precision measurements in order to test and ensure the quality of products, by using computer controlled machinery and systems.
Precision instrument assembler: Precision instrument assemblers read blueprints and assembly drawings to assemble precision instruments such as micrometers, gauges, thermostats and utility meters. They collect the different components and piece them together using hand tools or machinery. Furthermore they calibrate the instruments and test their precision.
Industrial quality manager: Industrial quality managers monitor and control information assets by detailing processes and procedures to ensure compliance with industrial standards. They perform audits in industrial processes, advise on preventive and corrective actions, and ensure compliance with industrial standards.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

Monitor manufacturing quality standards is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Container equipment assembly supervisor: Container equipment assembly supervisors monitor the assembly process of containers such as boilers or pressure vessels. They train and coach the workers involved in the assembly to achieve production goals.
Briquetting machine operator: Briquetting machine operators tend equipment to dry, mix, and compress metal chips into briquettes for use in a smelter.
Precision mechanics supervisor: Precision mechanics supervisors oversee, train and manage workers who fit together complex parts of small-size machines such as measuring or control mechanisms.
Machinery assembly coordinator: Machinery assembly coordinators prepare and plan the manufacturing of machinery. They monitor the entire production process and ensure that individual assemblies and resources are provided on time.
Vessel assembly supervisor: Vessel assembly supervisors coordinate the employees involved in boat and ship manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity. Vessel assembly supervisors train employees in company policies, job duties and safety measures. They check compliance with applied working procedures and engineering. Vessel assembly supervisors oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Machinery assembly supervisor: Machinery assembly supervisors monitor the machinery assembly process. They train and coach assembly workers to achieve production goals.
Production supervisor: Production supervisors coordinate, plan and direct manufacturing and production processes. They are responsible for reviewing production schedules or orders as well as dealing with staff in these production areas.
3D printing technician: 3D Printing technicians assist in the designing and programming of products, ranging from prosthetic products to 3D miniatures. They may also provide 3D printing maintenance, check 3D renders for customers and run 3D printing tests. 3D printing technicians can also repair, maintain and clean 3D printers.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Manufacturing manager: Manufacturing managers plan, oversee and direct the manufacturing process in an organisation. They ensure products and services are efficiently produced within the timeframe and budget given.
Paper mill supervisor: Paper mill supervisors coordinate and monitor the operations at a paper mill during production of products such as corrugated board, cardboard boxes or padded envelopes. They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness can be achieved. They have a clear overview of ongoing processes, and take quick decisions to resolve problems.
Metal production supervisor: Metal production supervisors oversee the day-to-day working process and activities of the labourers in a metal fabrication factory. They supervise staff, create work schedules, maintain a safe work environment and serve as the first, most accessible management representative for the workers to contact when there is need.
Electrical engineer: Electrical engineers design and develop electrical systems, electrical equipment, components, motors, and equipment with the feature of energy transmission. They engage in large scale projects such as the design and maintenance of power stations, and the distribution of power to smaller applications such as household appliances.
Printed circuit board designer: Printed circuit board designers diagram and design the construction of circuit boards. They envision the logical placing of conductive tracks, coppers, and pin pads in the board. They use computer programmes and specialised software for the designs.
Aircraft assembly supervisor: Aircraft assembly supervisors coordinate the employees involved in aircraft manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Industrial maintenance supervisor: Industrial maintenance supervisors organise and supervise the activities and maintenance operations of machines, systems and equipment. They ensure inspections are done according to health, safety and environmental standards, and productivity and quality requirements.
Industrial assembly supervisor: Industrial assembly supervisors are in charge of organizing, planning and coordinating assembly operations. They keep track of all the work activities and manage the process for efficient functioning in order to tackle problems such as production loss. They answer to the industrial production and the manufacturing manager.
Metallurgist: Metallurgists specialise in the extraction and processing of metals such as iron, steel, zinc, copper and aluminium. They work to mold or combine both pure and mixed metals (alloys) into new shapes and properties. Metallurgists handle the extraction of metal ores and develop their use in metal processing techniques. They may work in both manufacturing or do scientific research about the performance of metals.
Wood production supervisor: Wood production supervisors monitor processes involved in the conversion of felled trees into usable lumber. They follow the production process and make quick decisions to resolve problems. ​They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness, can be achieved.
Supply chain assistant: Supply chain assistants work closely together with managers in the operations processes, namely purchasing, manufacturing, and distribution processes. They help with administrative and pragmatic follow up of actions such as invoicing, drafting and preparation of contracts and purchasing orders, reconciliation of inventory against documents, and communication with distribution channels.
Welding coordinator: Welding coordinators supervise the workflow of welding applications. They monitor welding processes performed by other welders, supervise the staff, being sometimes responsible for vocational training. They also weld particularly demanding parts. Welding coordinators ensure that the necessary welding equipment is ready for usage. They mostly coordinate welding applications and related professional activities.
Rolling stock assembly supervisor: Rolling stock assembly supervisors coordinate the employees involved in rolling stock manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Motor vehicle assembly supervisor: Motor vehicle assembly supervisors coordinate the employees involved in motor vehicle manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Wood assembly supervisor: Wood assembly supervisors monitor the various processes in the assembly of wood products. They have a thorough understanding of the production processes under their supervision and take quick decisions when required.
Welding inspector: Welding inspectors examine the connections and bonds between metals. They utilise visual tools and electrical instruments to inspect and ensure the quality and safety of connections. Welding inspectors ensure that all related welding activities, plans and materials follow the appropriate guidelines, in accordance with safety regulations. In addition to working in the field completing their examinations of welding projects, inspectors spend time in an office setting compiling their reports.

References

1. Monitor manufacturing quality standards – ESCO