Operate lifting equipment

Transport heavy objects using lifting equipment such as cranes, forklifts etc.

run raising apparatus
handle raising apparatus
utilise lifting equipment
run lifting equipment
handle lifting equipment
utilise raising apparatus
use raising apparatus
use lifting equipment

skill/competence

cross-sector

Operate lifting equipment is an essential skill of the following occupations:

Production plant crane operator: Production plant crane operators operate the basic technologic cranes during the production process at the given unit by lifting and moving loads (bales, containers, buckets and other facilities) with raw and other materials.
Rubber cutting machine tender: Rubber cutting machine tenders operate the machine that cuts rubber stock into slabs. They take the slab of the conveyor and put it on a pallet, spraying a chemical solution on each slab to prevent sticking.

Operate lifting equipment is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal drawing machine operator: Metal drawing machine operators set up and operate drawing machines for ferrous and non-ferrous metal products, designed to provide wires, bars, pipes, hollow profiles and tubes with their specific form by reducing its cross-section and by pulling the working materials through a series of drawing dies.
Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Automotive battery technician: Automotive battery technicians assemble, install, inspect, maintain and repair batteries in motor vehicles. They use electrical test equipment to confirm good working condition after installation. They evaluate batteries to determine the nature of power problems. They also prepare old batteries for disposal.
Hydraulic forging press worker: Hydraulic forging press workers set up and tend hydraulic forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of compressive forces generated by a piston and fluid pressure.
Container equipment assembler: Container equipment assemblers manufacture containers such as boilers or pressure vessels. They read blueprints and technical drawings to assemble parts and to build piping and fittings.
Fiberglass laminator: Fiberglass laminators mould fiberglass materials to form hulls and boat decks. They read blueprints and use hand and power tools to cut the composite materials. They apply waxes and lacquers, and prepare surfaces for the placement of fiberglass mats. They use resin-saturated fiberglass to bond wood reinforcing strips to cabin structures and decks. They also prepare materials exposing those to the right temperature. They check finished products for defects and make sure they comply with the specifications.

Boat rigger: Boat riggers use hand and power tools to install motors, gauges, controls and accessories such as batteries, lights, fuel tanks and ignition switches. They also perform pre-delivery inspections.
Pipeline pump operator: Pipeline pump operators tend pump equipment and systems to transfer liquids and substances (e.g. such as chemical solutions, crude oil, gases, and others) from one point to the next. They operate hoses, pumps, and other equipment according to the good to be transferred. They ensure smooth circulation and flow of the goods in the pipelines.
Stone planer: Stone planers operate and maintain planing machines that are used for stone blocks and slabs finishing. They manipulate the stone and ensure that the required parameters are according to specifications.
Plastic heat treatment equipment operator: Plastic heat treatment equipment operators manipulate plastic products using machinery such as furnaces or flame-hardening machines in order to temper, anneal or heat-treat. They set up the machinery and read the production instructions to determine the furnace temperature. Plastic heat treatment equipment operators remove products from machines, let them cool down, examine and test products to see if they conform to specifications.
Injection moulding operator: Injection moulding operators operate and monitor injection moulding machines, in order to cast products from thermoplastic materials. They regulate the temperature, pressure, and volume of plastic, according to pre-defined specifications. Injection moulding operators also remove finished products and cut-away excess material, using a knife or other hand tools.
Electromechanical engineering technician: Electromechanical engineering technicians collaborate with electromechanical engineers in the development of electromechanical equipment. Electromechanical engineering technicians are responsible for building, installing, testing, monitoring, and maintaining the electromechanical equipment, circuits and systems. They test this by the use of test instruments such as oscilloscopes and voltmeters. Electromechanical engineering technicians also use soldering equipment and hand tools to repair electromechanical equipment.
Chemical mixer: Chemical mixers operate and maintain mixing tanks and blenders in order to develop chemical products out of raw materials, making sure the end products are in conformance to the batch tickets specifications.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Wire weaving machine operator: Wire weaving machine operators set up and tend wire weaving machines, designed to produce woven metal wire cloth out of the alloys or ductile metal that can be drawn into wire.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Welder:
Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform simple visual inspection of welds.
Aircraft gas turbine engine overhaul technician: Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the engines using engine-specific tooling.
Metalworking lathe operator: Metalworking lathe operators set up and tend a metalworking lathe manually, which is responsible for cutting metal to its desired size and shape by usage of a gear train or a swapping gear that propels the main lead-screw at a variable speed ratio, thus rotating the metal workpiece on its axis, facilitating the cutting process. They check the lathe equipment for wear and handle the metal workpieces as they have been cut by the lathe.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Blow moulding machine operator: Blow moulding machine operators operate and monitor blow moulding machine to mould plastic goods, according to requirements. They regulate temperature, air pressure and volume of plastic, according to specifications. Blow moulding machine operators remove finished products and cut away excess material, using a knife. They regrind surplus material and rejected workpieces for reuse, using a grinding machine.
Upsetting machine operator: Upsetting machine operators set up and tend upsetting machines, primarily crank presses, designed to form through forging processes metal workpieces, usually wires, rods, or bars, into their desired shape by having split dies with mulitiple cavities compress the workpieces’ length and hereby increasing their diameter.
Drop forging hammer worker: Drop forging hammer workers utilise forging machinery and equipment, specifically machined hammers, in order to form ferrous and non-ferrous metal workpieces to their desired shape. They tend the forging hammers that are dropped onto the workpiece in order to reshape it after the form of the die, which can be closed or open, fully enclosing the workpiece or not.
Cake press operator: Cake press operators set up and tend the hydraulic presses that compress and bake plastic chips into cake moulds to produce plastic sheets. They regulate and adjust the pressure and temperature.
Stone splitter: Stone splitters operate and maintain machines that split stone. They manipulate stone into different forms such as blocks, cobbles, tiles and concrete products. 
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Metal planer operator: Metal planer operators set up and operate a planer, which is a metalworking machine designed to cut excess material from a metal workpiece using linear relative motion between the planer’s cutting tool and the workpiece in order to create a linear toolpath and cut.
Straightening machine operator: Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle and the height of the straightening rolls and select the settings for the pressing force required to straighten the workpiece, taking into account the end product’s yield strenght and size, without excess work hardening.
Fibre machine tender: Fibre machine tenders operate and maintain extrusion machines that form sliver from filaments. They work with synthetic materials such as fiberglass or liquid polymer or non-synthetic materials such as rayon.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Metal products assembler: Metal products assemblers fit and fasten metal materials according to strictly laid down procedures in order to produce various parts or final products using power tools, hand tools, and other machinery.
Aircraft engine tester: Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories.They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle engine tester: Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Mechanical forging press worker: Mechanical forging press workers set up and tend mechanical forging presses, designed to shape ferrous and non-ferrous metal workpieces including pipes, tubes and hollow profiles and other products of the first processing of steel in their desired form by use of preset, compressive forces provided by cranks, cams and toggles at reproducible strokes.
Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Stone polisher: Stone polishers operate grinding and polishing tools and equipment in order to smooth stones.
Electromechanical equipment assembler: Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test the completed units to guarantee good working order and compliance with specifications and standards.
Vessel engine tester: Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, dual fuel engines and, in some cases, marine steam engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle body assembler: Motor vehicle body assemblers fasten motor vehicle body parts and components together such as frames, doors, chassis and hoods. They use hand tools, power tools and other equipment such as CNC machines or robots. They read technical plans and use automated assembling equipment to build motor vehicle bodies. They inspect individual parts for malfunctions and check the quality of assemblies to make sure the standards are met and the specifications respected. Motor vehicle body assemblers report any assembly issues to their supervisor.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

References

1. Operate lifting equipment – ESCO