Electromechanics

The engineering processes that combine electrical and mechanical engineering in the application of electromechanics in devices that need electricity to create mechanical movement or devices that create electricity by mechanical movement.

electrical and mechanical engineering
electro-mechanics

knowledge

cross-sector

Electromechanics is an essential knowledge of the following occupations:

Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Aircraft engine specialist: Aircraft engine specialists advise on maintaining procedures to engines of aircrafts and helicopters. They perform operability tests to components and parts of aircrafts to diagnose suitability for usage and possible operations to improve performance. They interpret and provide support to understand the technical specifications given by manufacturers for application at the airport’s premises.
Electrical equipment inspector: Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies back to production.
Electromechanical drafter: Electromechanical drafters draw and create blueprints together with electromechanical engineers. They interpret the specifications and requirements made by the engineer and design electromechanical equipment and components.
Vessel assembly supervisor: Vessel assembly supervisors coordinate the employees involved in boat and ship manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity. Vessel assembly supervisors train employees in company policies, job duties and safety measures. They check compliance with applied working procedures and engineering. Vessel assembly supervisors oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Instrumentation engineering technician: Instrumentation engineering technicians assist instrumentation engineers in the development of control equipment, such as valves, relays, and regulators, which can be used to monitor and control processes. Instrumentation engineering technicians are responsible for building, testing, monitoring, and maintaining of equipment. They use wrenches, beam cutters, grind saws, and overhead cranes to build and repair equipment.
Electromechanical engineering technician: Electromechanical engineering technicians collaborate with electromechanical engineers in the development of electromechanical equipment. Electromechanical engineering technicians are responsible for building, installing, testing, monitoring, and maintaining the electromechanical equipment, circuits and systems. They test this by the use of test instruments such as oscilloscopes and voltmeters. Electromechanical engineering technicians also use soldering equipment and hand tools to repair electromechanical equipment.
Electrical mechanic: Electrical mechanics install, repair and maintain mechanical and electrical components of machinery, tools and equipment. They test electrical parts to ensure efficiency and make improvements accordingly.
Electromechanical engineer: Electromechanical engineers design and develop equipment and machinery that use both electrical and mechanical technology. They make draughts and prepare documents detailing the material requisitions, the assembly process and other technical specifications. Electromechanical engineers also test and evaluate the prototypes. They oversee the manufacturing process.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Aircraft maintenance engineer: Aircraft maintenance engineers make preflight and postflight inspections, adjustments, and minor repairs to ensure safe and sound performance of aircrafts. They inspect aircraft prior to takeoff to detect malfunctions such as oil leaks, electrical or hydraulic problems. They verify passenger and cargo distribution and amount of fuel to ensure that weight and balance specifications are met.
Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Rolling stock engine inspector: Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centers. They review administrative records, analyse the operating performance of engines and report their findings.
Electrical supervisor: Electrical supervisors monitor the operations involved in installing and servicing electricity cables and other electrical infrastructure. They assign tasks and take quick decisions to resolve problems.
Motor vehicle engine inspector: Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Aircraft maintenance technician: Aircraft maintenance technicians perform preventive maintenance to aircrafts, aircrafts components, engines and assemblies, such as airframes and hydraulic and pneumatic systems. They perform inspections following strict protocols and aviation laws.
Aircraft assembly supervisor: Aircraft assembly supervisors coordinate the employees involved in aircraft manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Aircraft de-icer installer: Aircraft de-icer installers assemble, install, test, maintain and repair mechanical de-icing and anti-icing systems that prevent ice accumulation or formation on aircrafts and spacecrafts.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Control panel tester: Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and testing equipment to detect malfunctions and may correct faulty wiring and components.
Aircraft engine tester: Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories.They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle engine tester: Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Avionics inspector: Avionics inspectors inspect instruments, electrical, mechanical and electronic systems of aircrafts to ensure their compliance with the performance and safety standards. They also examine maintenance, repair and overhaul work and review any modification to check its conformity to standards and procedures. They provide detailed inspection, certification and repair records.
Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Control panel assembler: Control panel assemblers read schematic drawings to assemble control panel units for electrical equipment. They put together wiring, switches, control and measuring apparatus and cables with hand operated tools.
Electromechanical equipment assembler: Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test the completed units to guarantee good working order and compliance with specifications and standards.
Vessel engine inspector: Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, fuel dual engines and, in some cases, marine steam engines in assembly facilities to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Rolling stock assembly supervisor: Rolling stock assembly supervisors coordinate the employees involved in rolling stock manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Motor vehicle assembly supervisor: Motor vehicle assembly supervisors coordinate the employees involved in motor vehicle manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Vessel engine tester: Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, dual fuel engines and, in some cases, marine steam engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Aircraft engine inspector: Aircraft engine inspectors inspect all types of engines used for aircrafts in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

Electromechanics is optional for these occupations. This means knowing this knowledge may be an asset for career advancement if you are in one of these occupations.

Medical device engineer: Medical device engineers design and develop medical-technical systems, installations, and equipment such as pacemakers, MRI scanners, and X-ray machines. They monitor the whole manufacturing process from concept design to product implementation. activities undertaken include, among others, designing product improvements, developing methods and techniques to evaluate design suitability, coordinating initial production, developing test procedures, and designing manufacturing diagrams.
Dental instrument assembler: Dental instrument assemblers assemble various dental instruments, such as drills, lasers, probes, mirrors, and dental imaging devices. They use various machinery, hand tools, chemicals, adhesives and epoxies to assemble the dental instruments. They use precision tools and work in cleanroom environments.
Mechatronics assembler: Mechatronics assemblers assemble and maintain complex mechatronic equipment and machines, such as robots, elevators, and advanced home appliances. They build the mechanical, electrical, and electronic components, install software, set the systems in operation, and maintain and repair the components and systems.
Aerospace engineering drafter: Aerospace engineering drafters convert the aerospace engineers’ designs into technical drawings usually using computer-aided design programs. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of aircrafts and spacecrafts.
Marine electronics technician: Marine electronics technicians lay out, install and repair electronic systems and equipment in vessels. They assemble electronic components and wiring according to blueprints and assembly drawings.
Component engineer: Component engineers design and envision the engineering development of different small parts composing a bigger project, machine, or process. They ensure that parts are not conflicting from an engineering perspective.
Rotating equipment mechanic: Rotating equipment mechanics are responsible for preventive and corrective maintenance activities for rotating equipment such as turbines, compressors, engines, and pumps. They ensure the availability and integrity of the installed systems and equipment in terms of safety and reliability.
Medical device assembler: Medical device assemblers manufacture instruments, machines and appliances that can be used to prevent, diagnose or treat medical conditions. Medical devices can be non-electrical, such as tubes, needles, drainage sets and sterile pipettes, as well as electrical, such as pacemakers, MRI machines, and X-ray devices. Some may also work in the production of medical furniture such as hospital beds and operation tables.
Electrical drafter: Electrical drafters support engineers in the design and conceptualisation of electrical equipment. They draft, with the support of specialised software, the specifications of a varied number of electrical systems such as voltage transformers, power plants, or energy supply in buildings.
Boat rigger: Boat riggers use hand and power tools to install motors, gauges, controls and accessories such as batteries, lights, fuel tanks and ignition switches. They also perform pre-delivery inspections.
Marine engineering drafter: Marine engineering drafters convert the marine engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of all types of boats from pleasure crafts to naval vessels, including submarines.
Building electrician: Building electricians install and maintain electricity cables and other electrical infrastructure in buildings. They make sure installed electrical equipment is isolated and presents no fire hazards. They understand existing situations and make improvements if called for.
Automotive engineering drafter: Automotive engineering drafters convert the automotive engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of automotive components, cars, buses, trucks and other motor vehicles.
Electrical equipment assembler: Electrical equipment assemblers are responsible for the assembly of electrical equipment. They assemble product components and wiring according to the blueprints.
Rolling stock engineering drafter: Rolling stock engineering drafters convert the rolling stock engineers’ designs into technical drawings usually using software. Their drawings detail dimensions, fastening and assembling methods and other specifications used in the manufacture of rail vehicles such as locomotives, multiple units, carriages and wagons.
Electrician: Electricians fit and repair electrical circuits and wiring systems. They also install and maintain electrical equipment and machinery. This work can be performed indoors as well as outdoors, in nearly every type of facility.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Domestic electrician: Domestic electricians install and maintain electrical infrastructures and domestic machinery in homes and other residential buildings. They perform inspections and repair defective parts to ensure efficiency.
Industrial electrician: Industrial electricians install and maintain electricity cables and other electrical infrastructure in large industrial and commercial buildings. They perform inspections and repair defective parts of electrical systems to ensure efficiency.
Electronic equipment assembler: Electronic equipment assemblers are responsible for the assembly of electronic equipment and systems. They assemble electronic components and wiring according to blueprints and assembly drawings. They may assist in quality inspection and equipment maintenance.
Product assembly inspector: Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. They use measuring and testing equipment to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They also provide detailed inspection documentation and recommend action where problems are discovered.
Motorcycle assembler: Motorcycle assemblers fasten motorcycle parts and components together such as frames, wheels, engines etc. To do so, they use hand tools, power tools and other equipment such as CNC machines or robots. They read technical plans and use automated assembling equipment to build motorcycles. They inspect individual parts for malfunctions and check the quality of assemblies to make sure the standards are met and the specifications respected.
Tooling engineer: Tooling engineers design new tools for manufacturing equipment. They prepare tooling quotation requests. They estimate costs and delivery time, manage tooling construction follow-up and supervise the routine maintenance of tools. They also analyse data to determine the cause of major tooling difficulties and develop recommendations and action plans for solutions.
Rolling stock engineer: Rolling stock engineers design and oversee the manufacturing process and installation of rail vehicles, including locomotives, carriages, wagons and multiple units. They design new trains and electrical or mechanical parts, supervise modifications and resolve technical problems. They also perform routine maintenance duties to ensure that trains are in good condition and meet quality and safety standards.
Aircraft gas turbine engine overhaul technician: Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the engines using engine-specific tooling.
Electrical engineer: Electrical engineers design and develop electrical systems, electrical equipment, components, motors, and equipment with the feature of energy transmission. They engage in large scale projects such as the design and maintenance of power stations, and the distribution of power to smaller applications such as household appliances.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Automotive engineer: Automotive engineers design and oversee the manufacturing process and operation of motor vehicles such as motorcycles, cars, trucks, buses and their respective engineering systems. They design new vehicles or mechanical parts, supervise modifications and resolve technical problems. They make sure the designs comply with cost specifications and other constraints. They also conduct research studying environmental, energy and safety aspects.
Transport technology vocational teacher: Transport technology vocational teachers instruct students in their specialised field of study, transport technology, which is predominantly practical in nature. They provide theoretical instruction in service of the practical skills and techniques the students must subsequently master for a transport technology-related profession, such as automotive brake technician. Transport technology vocational teachers monitor the students’ progress, assist individually when necessary, and evaluate their knowledge and performance on the subject of transport technology through assignments, tests and examinations.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Electrical engineering technician: Electrical engineering technicians work together with electrical engineers in electrical engineering research. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities.

Vessel assembly inspector: Vessel assembly inspectors use measuring and testing equipment to inspect and monitor boat and ship assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Drafter: Drafters prepare and create technical drawings using a special software or manual techniques, to show how something is built or works.
Mechatronics engineer: Mechatronics engineers design and develop intelligent systems, such as robotic devices, smart home appliances, and aeroplanes, through combining technologies from mechanical, electronic, computer, and control engineering. They create blueprints or design documents for parts, assemblies or finished products using software programs, and also oversee and manage projects.
Electrical equipment production supervisor: Electrical equipment production supervisors coordinate, plan and direct the production process of electrical equipment. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Aircraft assembly inspector: Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction or damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Automation engineer: Automation engineers research, design, and develop applications and systems for the automation of the production process. They implement technology and reduce, whenever applicable, human input to reach the full potential of industrial robotics. Automation engineers oversee the process and ensure all systems run safely and smoothly.
Security alarm technician: Security alarm technicians install and maintain security alarm systems to protect against hazards such as fire and burglary. They install sensors and control systems and connect them to power and telecommunication lines if required. Security alarm technicians explain usage of the installed systems to the prospective users.
Marine engineer: Marine engineers design, build, maintain and repair the hull, mechanical, electronic equipment and auxiliary systems such as engines, pumps, heating, ventilation, generator sets. They work on all types of boats from pleasure crafts to naval vessels, including submarines.
Rolling stock assembly inspector: Rolling stock assembly inspectors use measuring and testing equipment to inspect and monitor rolling stock assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Wire harness assembler: Wire harness assemblers bind wires or cables to form wire harnesses used in electronic and electrical systems and equipment. They read electrical wiring plans and tie the wire together according to specifications, using cable ties, cable lacing, electrical conduit, and sleeves.
Precision instrument assembler: Precision instrument assemblers read blueprints and assembly drawings to assemble precision instruments such as micrometers, gauges, thermostats and utility meters. They collect the different components and piece them together using hand tools or machinery. Furthermore they calibrate the instruments and test their precision.
Engineering lecturer: Engineering lecturers are subject professors, teachers, or lecturers who instruct students who have obtained an upper secondary education diploma in their own specialised field of study, engineering, which is predominantly academic in nature. They work with their university research assistants and university teaching assistants for the preparation of lectures and of exams, for leading laboratory practices, grading papers and exams and for leading review and feedback sessions for the students. They also conduct academic research in their field of engineering, publish their findings and liaise with other university colleagues.
Mechatronics engineering technician: Mechatronics engineering technicians collaborate with engineers in the development of mechatronic devices and applications through a combination of mechanical engineering, electronic engineering, and computer engineering. They build, test, install, and calibrate mechatronics and solve technical problems.
Rolling stock electrician: Rolling stock electricians install, maintain and repair electrical and electronic systems in rail vehicles such as air conditioning systems, lamps, heating systems, electrical wiring etc. They use diagnostic testing equipment to inspect vehicles and find faults. To do repair work, they use hand tools and specialised electrical instruments and machines.
Application engineer: Application engineers deal with the technical requirements, management, and design for the development of various engineering applications, such as systems, new product designs, or the improvements of processes. They are responsible for the implementation of a design or process improvement, they offer technical support for products, answer questions about the technical functionality and assist the sales team.

References

1. Electromechanics – ESCO