Install electrical and electronic equipment

Install equipment which is dependent on electric currents or electromagnetic fields in order to work, or equipment to generate, transfer or measure such currents and fields. This equipment includes switchboards, electric motors, generators or direct current systems.

build electric and digital components and systems
introduce electrical and electronic equipment
construct electrical and electronic equipment
construct electric and digital components and systems
introduce electric and digital components and systems
institute electrical and electronic equipment
institute electric and digital components and systems
build electrical and electronic equipment

skill/competence

cross-sector

Install electrical and electronic equipment is an essential skill of the following occupations:

Air traffic safety technician: Air traffic safety technicians provide technical support regarding the safety of air traffic control and navigation systems. They design, maintain, install and operate these systems both in the airport and on board the aeroplane according to regulations.
Medical device engineering technician: Medical device engineering technicians collaborate with medical device engineers in the design, development and production of medical-technical systems, installations, and equipment such as pacemakers, MRI machines, and X-ray devices. They build, install, inspect, modify, repair, calibrate, and maintain medical-technical equipment and support systems. Medical device engineering technicians  are responsible for the operational readiness, safe use, economic operation and the appropriate procurement of medical equipment and facilities in hospitals.
Building electrician: Building electricians install and maintain electricity cables and other electrical infrastructure in buildings. They make sure installed electrical equipment is isolated and presents no fire hazards. They understand existing situations and make improvements if called for.
Electrician: Electricians fit and repair electrical circuits and wiring systems. They also install and maintain electrical equipment and machinery. This work can be performed indoors as well as outdoors, in nearly every type of facility.
Pneumatic systems technician: Pneumatic systems technicians use blueprints and technical documentation to assemble and install equipment operated by gas or air under pressure. They set up the systems according to engineering specifications and test them to ensure good functioning order. They may also perform maintenance and repair work on installed pneumatic equipment.
Electrical mechanic: Electrical mechanics install, repair and maintain mechanical and electrical components of machinery, tools and equipment. They test electrical parts to ensure efficiency and make improvements accordingly.
Domestic electrician: Domestic electricians install and maintain electrical infrastructures and domestic machinery in homes and other residential buildings. They perform inspections and repair defective parts to ensure efficiency.
Industrial electrician: Industrial electricians install and maintain electricity cables and other electrical infrastructure in large industrial and commercial buildings. They perform inspections and repair defective parts of electrical systems to ensure efficiency.
Solar energy technician: Solar energy technicians install and maintain systems that collect solar energy. They prepare the necessary fixtures, often on roofs, install solar panels, and plug them into an electronic system including an inverter to connect the solar energy systems to the electricity lines.
Heating, ventilation, air conditioning (and refrigeration) service engineer: Heating, ventilation, air conditioning (and refrigeration) service engineers install and maintain industrial heating, air conditioning and possibly refrigeration systems. They set up furnaces, thermostats, ducts, vents, and other equipment needed to ensure the controlled passage and treatment of air. They also carry out repairs.
Aircraft maintenance engineer: Aircraft maintenance engineers make preflight and postflight inspections, adjustments, and minor repairs to ensure safe and sound performance of aircrafts. They inspect aircraft prior to takeoff to detect malfunctions such as oil leaks, electrical or hydraulic problems. They verify passenger and cargo distribution and amount of fuel to ensure that weight and balance specifications are met.
Aircraft maintenance technician: Aircraft maintenance technicians perform preventive maintenance to aircrafts, aircrafts components, engines and assemblies, such as airframes and hydraulic and pneumatic systems. They perform inspections following strict protocols and aviation laws.
Wind turbine technician: Wind turbine technicians maintain and repair wind turbines by performing diagnostic inspections, analysing faults, and performing repair duties. They ensure the wind turbines operate in compliance with regulations, and assist the wind engineers in the construction of wind turbines. Wind turbine technicians may also test and install hardware and software components of wind turbines.
Security alarm technician: Security alarm technicians install and maintain security alarm systems to protect against hazards such as fire and burglary. They install sensors and control systems and connect them to power and telecommunication lines if required. Security alarm technicians explain usage of the installed systems to the prospective users.
Crane technician: Crane technicians assemble industrial and harbor cranes components. They install conveyors and controls. Crane technicians perform the final assembly on site and maintain and repair cranes.
Electromechanical equipment assembler: Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test the completed units to guarantee good working order and compliance with specifications and standards.
Avionics technician: Avionics technicians install, test, inspect and adjust electrical and electronic equipment such as navigation, communication and flight control systems in aircraft and spacecraft. They carry out maintenance and repair work. They perform functional tests, diagnose problems and take corrective action.
Lift engineer: Lift engineers set lifts into a prepared framed hoistway. They install support assembly, set up the lift pump or motor, piston or cable, and mechanism. Lift engineers connect the necessary electronic elements to complete the installation and connection of the lift cabin. They also perform the necessary steps to inspect and repair lifts, as well as the shaft and any associated electronics. Lift engineers make sure every inspection and report action is noted in a log book, and report to the client on the state of the serviced lift.
Rolling stock electrician: Rolling stock electricians install, maintain and repair electrical and electronic systems in rail vehicles such as air conditioning systems, lamps, heating systems, electrical wiring etc. They use diagnostic testing equipment to inspect vehicles and find faults. To do repair work, they use hand tools and specialised electrical instruments and machines.
Electric meter technician: Electric meter technicians install and maintain electric meter systems in facilities or buildings. They install the equipment in accordance with regulations and repair faults and other problems. They test the equipment and advise on the use and care.

Install electrical and electronic equipment is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Fluid power technician: Fluid power technicians install and assemble equipment that uses liquid or gas pressure to transmit or regulate power. They also perform tests on and maintain this equipment.
Industrial machinery mechanic: Industrial machinery mechanics work on new machinery and equipment in operation. They set up for the specific application and build accessories if necessary, perform maintenance and repair, and run diagnostics to find faults in systems or parts that need replacing.
Boat rigger: Boat riggers use hand and power tools to install motors, gauges, controls and accessories such as batteries, lights, fuel tanks and ignition switches. They also perform pre-delivery inspections.
Electronics engineering technician: Electronics engineering technicians work closely with electronics engineers in the development of electronic equipment and devices. Electronics engineering technicians are responsible for building, testing, and maintaining electronic devices.
Textile machinery technician: Textile machinery technicians set up, maintain, inspect and repair mechanical and computer-controlled machinery used in textile manufacturing such as weaving, dyeing and finishing machines.
 
Lift installation supervisor: Lift installation supervisor monitor the installation of lifts. They keep an overview of the proceedings, assign tasks, and take quick decisions to resolve problems.
Heating, ventilation, air conditioning and refrigeration engineering technician: Heating, ventilation, air conditioning and refrigeration engineering technicians aid in the design of devices which provide heating, ventilation, air conditioning and possibly refrigeration in buildings. They ensure the equipment complies with environmental standards. They handle hazardous materials used in the systems, and ensure safety precautions are in place.
Electrical equipment assembler: Electrical equipment assemblers are responsible for the assembly of electrical equipment. They assemble product components and wiring according to the blueprints.
Forge equipment technician: Forge equipment technicians maintain and repair forge machinery such as presses and material handling equipment. They perform evaluations of the equipment, perform preventative maintenance activities, and repair faults. They also assist in the installation of the equipment and ensure proper functionality.
Moulding machine technician: Moulding machine technicians service machinery used in the casting and moulding of plastics and other materials. They calibrate the equipment, perform maintenance activities, examine finished products and repair faults.
Solar power plant operator: Solar power plant operators operate and maintain equipment which produce electrical energy from solar power. They monitor measuring equipment to ensure the safety of operations, and that the production needs are met. They also react to system problems, and repair faults.
Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Marine mechanic: Marine mechanics are in charge of the engines and mechanical parts of the vessel and replace defective equipment and parts. They communicate with other crew members on the operational level. Marine mechanics maintain and repair the engines and the other machinery of vessels such as boilers, generators and electrical equipment.
Electrical supervisor: Electrical supervisors monitor the operations involved in installing and servicing electricity cables and other electrical infrastructure. They assign tasks and take quick decisions to resolve problems.
Construction equipment technician: Construction equipment technicians inspect, maintain and repair heavy-duty vehicles used in construction, forestry and earthworks such as bulldozers, excavators and harvesters. They perform evaluations of the equipment, and ensure the safety and optimal efficiency of the machinery.
Agricultural machinery technician: Agricultural equipment technicians repair, overhaul and maintain agricultural equipment including tractors, tillage equipment, seeding equipment and harvesting equipment. They perform evaluations of the equipment, perform preventive maintenance activities and repair faults.

References

1. Install electrical and electronic equipment – ESCO