Monitor end-product drying process

Let the end-products to cool and dry during the correct amount of time. If necessary, hasten the drying process using kilns or delay it by allowing water to humidify the products.

monitoring end-product drying process
end-product drying process monitoring
oversee end-product drying process
overseeing end-product drying process
end-product drying process overseeing

skill/competence

sector-specific

Monitor end-product drying process is an essential skill of the following occupations:

Hand brick moulder: Hand brick moulders create unique bricks, pipes, and other heat-resistant products using hand moulding tools. They create moulds according to specifications, clean and oil them, insert and remove the mixture from the mould. Then, they let the bricks dry in kiln before finishing and smoothing the end products.

Monitor end-product drying process is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Metal annealer: Metal annealers operate electric or gas kilns to soften metal so it can be cut and shaped more easily. They heat the metal to a specific temperature and / or colour and then slowly cool it, both according to specifications. Metal annealers inspect the metals through the entire process to observe any flaws.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Clay products dry kiln operator: Clay products dry kiln operators manage drying tunnels that are meant for drying clay products prior to their treatment in kiln.
Glass annealer: Glass annealers operate electric or gas kilns used to strengthen the glass products by a heating-cooling process, making sure the temperature is set according to specifications. They inspect the glass products  through the entire process to observe any flaws.
Glass forming machine operator: Glass forming machine operators operate and maintain machines that press or blow molten glass in moulds to form or shape products, such as neons, bottles, jars and drinking glasses. They set up and adjust machines, and weigh, measure and check production samples to check conformity to the set specifications.

References

1. Monitor end-product drying process – ESCO