Monitor machine operations

Observe machine operations and evaluate product quality thereby ensuring conformity to standards.

supervise machine operations
oversee machine operations
view machine operations
monitor machines operations
watch machine operations
monitor machine operation
monitor machinery operations

skill/competence

cross-sector

Monitor machine operations is an essential skill of the following occupations:

Precision device inspector: Precision device inspectors make sure precision devices, such as micrometers and gauges, operate according to design specifications. They may adjust the precision devices and their components in case of any faults.
Pasta operator: Pasta operators manufacture dry pasta products. They unload raw ingredients from storage silos and ingredient delivery systems. These operators mix, press, extrude as to reach desired drying levels of pasta.
Semiconductor processor: Semiconductor processors manufacture electronic semiconductors as well as semiconductor devices, such as microchips or integrated circuits (IC’s). They may also repair, test, and review the products. Semiconductor processors work in cleanrooms and therefore need to wear a special lightweight outfit that fits over their clothing to prevent particles from contaminating their worksite.
Cigar brander: Cigar branders tend machines that stamp brands on cigar wrappers. They keep machines supplied with all the required input material and observe that processes do not jam. They clean ink rollers preventively.

Mechatronics assembler: Mechatronics assemblers assemble and maintain complex mechatronic equipment and machines, such as robots, elevators, and advanced home appliances. They build the mechanical, electrical, and electronic components, install software, set the systems in operation, and maintain and repair the components and systems.
Baker: Bakers make a wide range of breads, pastries, and other baked goods. They follow all the processes from receipt and storage of raw materials, preparation of raw materials for bread-making, measurement and mixing of ingredients into dough and proof. They tend ovens to bake products to an adequate temperature and time.

Tyre builder: Tyre builders build pneumatic tyres from rubber components. They operate machines and handtools.
Pasta maker: Pasta makers prepare fresh pasta, fillings, and other types of pasta following specific recipes and processes.
Machine operator supervisor: Machine operator supervisors coordinate and direct workers who set up and operate machines. They monitor the production process and the flow of materials, and they make sure that the products meet the requirements.
Wave soldering machine operator: Wave soldering machine operators set up and operate machines to solder electronic components to the printed circuit board. They read blueprints and layout designs.
Automated optical inspection operator: Automated optical inspection operators (AOI operators) operate automated optical inspection machines to inspect assembled printed circuit boards. They read blueprints and inspect the finished or in-process PCB assemblies for flaws or defects.
Cellar operator: Fermentation cellar operators take charge of fermentation and maturation tanks. They control fermentation process of wort inoculated with yeast. They tend equipment that cools and adds yeast to wort as to produce beer. For the purpose, they control the flow of refrigeration that goes through cool coils regulating the temperature of hot wort in the tanks.
Optical instrument production supervisor: Optical instrument production supervisors coordinate, plan and direct the optical instrument production process. They make sure the optical glass is processed properly and optical equipment is assembled according to specifications. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Surface-mount technology machine operator: Surface-mount technology machine operators use surface-mount technology (SMT) machines to mount and solder small electronic components onto printed circuit boards to create surface-mounted devices (SMD).
Spinning machine operator: Spinning machine operators produce yarns, twists, and other fibres by tending spinning, twisting, winding, and reeling machines. They handle raw materials, prepare them for spinning processes, and use machinery for the purpose. They also perform routine maintenance of the machinery.
Baking operator: Baking operators tend automatic reels or conveyor-type ovens to bake bread, pastries and other bakery products. They interpret work orders to determine the products and the quantities to be baked. They set the operational speed of conveyors, baking times, and temperatures. They supervise the baking process and maintain oven operations in control.
Battery assembler: Battery assemblers are welding and assembling the battery components such as electronics parts, wiring, and casing around the cells.
Rubber goods assembler: Rubber goods assemblers manufacture rubber products such as water bottles, swim fins, and rubber gloves. They fasten ferrules, buckles, and straps to rubber goods, and also wrap fabric tape around closures and ferrules.
Robotics engineering technician: Robotics engineering technicians collaborate with engineers in the development of robotic devices and applications through a combination of mechanical engineering, electronic engineering, and computer engineering. Robotics engineering technicians build, test, install and calibrate robotic equipment.
Distillery miller: Distillery millers tend distillery mills in order to clean and grind whole grain for use in production of distilled liquors. They tend cleaning machines to remove impurities from grains followed by the grinding and weighing of grains. They perform daily maintenance on pumps, air-conveyor chutes and machines.

Electronics production supervisor: Electronics production supervisors coordinate, plan and direct the electronics production process. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Packaging and filling machine operator: Packaging and filling machine operators tend machines for preparing and packing food products in various packaging containers such as jars, cartons, cans, and others.
Calibration technician: Calibration technicians test and calibrate electrical and electronic equipment. They read blueprints and other technical drawings to develop testing procedures for every product.
Animal feed supervisor: Animal feed supervisors supervise the manufacturing process of animal feeds. They control quality, take samples for labs, follow up on lab results and take measures according to the results.
Cigarette making machine operator: Cigarette making machine operators tend cigarette-making machines to encase tobacco in continuous paper rolls followed by cutting cigarettes from roll. They place roll of cigarette paper on spindles and set monogram-printing devices to print brand name on cigarette paper at specified position.

Pastry maker: Pastry makers prepare and bake cakes, cookies, croissants, pies and alike products according to recipes.

Monitor machine operations is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Microelectronics engineering technician: Microelectronics engineering technicians collaborate with microelectronics engineers in the development of small electronic devices and components such as micro-processors, memory chips, and integrated circuits for machine and motor controls. Microelectronics engineering technicians are responsible for building, testing, and maintaining the microelectronic systems and devices.
Clock and watchmaker: Clock and watchmakers make mechanical or electronic clocks and watches. They use precision hand tools or automated machinery to assemble the timing devices. Clock and watchmakers may also repair clocks or watches. They can work in workshops or in factories.
Optical instrument assembler: Optical instrument assemblers read blueprints and assembly drawings to assemble lenses and optical instruments, such as microscopes, telescopes, projection equipment, and medical diagnostic equipment. They process, grind, polish, and coat glass materials, centre lenses according to the optical axis, and cement them to the optical frame. They may test the instruments after assembly.
Dental instrument assembler: Dental instrument assemblers assemble various dental instruments, such as drills, lasers, probes, mirrors, and dental imaging devices. They use various machinery, hand tools, chemicals, adhesives and epoxies to assemble the dental instruments. They use precision tools and work in cleanroom environments.
Photonics engineering technician: Photonics engineering technicians collaborate with engineers in the development of photonic systems or components, usually in the form of optical equipment, such as lasers, lenses, and fibre optic equipment. Photonics engineering technicians build, test, install and calibrate optical equipment. They read blueprint and other technical drawings to develop testing and calibrating procedures.
Printed circuit board test technician: Printed circuit board test technicians inspect and test printed circuit boards. They perform a range of printed circuit board testing procedures and may perform minor repairs.
Microsystem engineering technician: Microsystem engineering technicians collaborate with micro-system engineers in the development of microsystems or microelectromechanical systems (MEMS) devices, which can be integrated in mechanical, optical, acoustic, and electronic products. Microsystem engineering technicians are responsible for building, testing, and maintaining the microsystems.

Electronics engineering technician: Electronics engineering technicians work closely with electronics engineers in the development of electronic equipment and devices. Electronics engineering technicians are responsible for building, testing, and maintaining electronic devices.
Medical device engineering technician: Medical device engineering technicians collaborate with medical device engineers in the design, development and production of medical-technical systems, installations, and equipment such as pacemakers, MRI machines, and X-ray devices. They build, install, inspect, modify, repair, calibrate, and maintain medical-technical equipment and support systems. Medical device engineering technicians  are responsible for the operational readiness, safe use, economic operation and the appropriate procurement of medical equipment and facilities in hospitals.
Machinery assembly supervisor: Machinery assembly supervisors monitor the machinery assembly process. They train and coach assembly workers to achieve production goals.
Electromechanical engineering technician: Electromechanical engineering technicians collaborate with electromechanical engineers in the development of electromechanical equipment. Electromechanical engineering technicians are responsible for building, installing, testing, monitoring, and maintaining the electromechanical equipment, circuits and systems. They test this by the use of test instruments such as oscilloscopes and voltmeters. Electromechanical engineering technicians also use soldering equipment and hand tools to repair electromechanical equipment.
Sensor engineering technician: Sensor engineering technicians collaborate with sensor engineers in the development of sensors, sensor systems, and products that are equipped with sensors. Their role is to build, test, maintain, and repair the sensor equipment.
Paper mill supervisor: Paper mill supervisors coordinate and monitor the operations at a paper mill during production of products such as corrugated board, cardboard boxes or padded envelopes. They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness can be achieved. They have a clear overview of ongoing processes, and take quick decisions to resolve problems.
Electromechanical engineer: Electromechanical engineers design and develop equipment and machinery that use both electrical and mechanical technology. They make draughts and prepare documents detailing the material requisitions, the assembly process and other technical specifications. Electromechanical engineers also test and evaluate the prototypes. They oversee the manufacturing process.
Electrical engineer: Electrical engineers design and develop electrical systems, electrical equipment, components, motors, and equipment with the feature of energy transmission. They engage in large scale projects such as the design and maintenance of power stations, and the distribution of power to smaller applications such as household appliances.
Electrical engineering technician: Electrical engineering technicians work together with electrical engineers in electrical engineering research. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities.

Photographic equipment assembler: Photographic equipment assemblers build photographic products such as cameras, film cameras, and projectors. They collect the different optical, electronic, and mechanical camera components, such as the battery, mirrors, image processor, and lenses, and piece together cameras according to specifications using hand tools or machinery.
Electrical equipment production supervisor: Electrical equipment production supervisors coordinate, plan and direct the production process of electrical equipment. They manage labourers working on the production line, oversee the quality of the assembled goods, and perform cost and resource management.
Industrial assembly supervisor: Industrial assembly supervisors are in charge of organizing, planning and coordinating assembly operations. They keep track of all the work activities and manage the process for efficient functioning in order to tackle problems such as production loss. They answer to the industrial production and the manufacturing manager.
Mineral crushing operator: Mineral crushing operators operate and monitor crushers and other machines to crush materials and minerals. They move stones to the crushers, fill the machines with minerals, monitor the crushing process and ensure that the end products meet requirements.
Wood production supervisor: Wood production supervisors monitor processes involved in the conversion of felled trees into usable lumber. They follow the production process and make quick decisions to resolve problems. ​They ensure that production targets, such as quantity and quality of products, timeliness and cost-effectiveness, can be achieved.
Optomechanical engineering technician: Optomechanical engineering technicians collaborate with engineers in the development of optomechanical devices, such as optical tables, deformable mirrors, and optical mounts. Optomechanical engineering technicians build, install, test, and maintain optomechanical equipment prototypes. They determine materials and assembly requirements.
Optoelectronic engineering technician: Optoelectronic engineering technicians collaborate with engineers in the development of optoelectronic systems and components, such as photodiodes, optical sensors, lasers and LED’s. Optoelectronic engineering technicians build, test, install and calibrate optoelectronic equipment. They read blueprint and other technical drawings to develop testing and calibrating procedures.
Wood assembly supervisor: Wood assembly supervisors monitor the various processes in the assembly of wood products. They have a thorough understanding of the production processes under their supervision and take quick decisions when required.

References

1. Monitor machine operations – ESCO