Move filled moulds

Replace filled-up moulds; understand how to load moulds into the oven and how to store filled-up moulds onto a rack.

filled moulds transport
transport filled moulds
filled molds movement
transporting of filled molds
moving filled moulds
movement of filled moulds
filled mould transport
movement of filled molds
filled mould movement
moving of filled molds
transport filled molds
moving of filled moulds
transporting of filled moulds
transporting filled moulds
filled mold movement
transporting filled molds
filled molds transport
filled mold transport
filled moulds movement
moving filled molds

skill/competence

sector-specific

Move filled moulds is an essential skill of the following occupations:

Moulding machine operator: Moulding machine operators operate machines that are part of the production process of moulds for the manufacturing of castings or other moulded materials. They tend the mouldmaking machines that use the appropriate materials such as sand, plastics, or ceramics to obtain the moulding material. They may then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of moulded products such as ferrous and non-ferrous metal castings.
Mouldmaker: Mouldmakers manually create moulds for the production of metal products. They mix sand and hardening materials to obtain a specialised mixture. They then use a pattern and one or more cores to produce the right shape impression in this material. The shaped material is then left to set, later to be used as a mould in the production of ferrous and non-ferrous metal castings.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Cake press operator: Cake press operators set up and tend the hydraulic presses that compress and bake plastic chips into cake moulds to produce plastic sheets. They regulate and adjust the pressure and temperature.
Foundry operative: Foundry operative manufacture castings, including pipes, tubes, hollow profiles and other products of the first processing of steel, by operating hand-controlled equipment in a foundry. They conduct the flow of molten ferrous and non-ferrous metals into moulds, taking care to create the exact right circumstances to obtain the highest quality metal. They observe the flow of metal to identify faults. In case of a fault, they notify the authorised personnel and participate in the removal of the fault.

Move filled moulds is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Sectional belt mould assembler: Sectional belt mould assemblers operate the machine that presses belts into a V-shape. They stretch the belt around the mould and start the machine.
Injection moulding operator: Injection moulding operators operate and monitor injection moulding machines, in order to cast products from thermoplastic materials. They regulate the temperature, pressure, and volume of plastic, according to pre-defined specifications. Injection moulding operators also remove finished products and cut-away excess material, using a knife or other hand tools.

References

1. Move filled moulds – ESCO