Operate forklift

Operate a forklift, a vehicle with a pronged device in front for lifting and carrying heavy loads.

use a forklift
drive forklift
drive a forklift
operate a forklift
run a forklift

skill/competence

cross-sector

Operate forklift is an essential skill of the following occupations:

Airport baggage handler: Airport baggage handlers receive and return the luggage of passengers at airport terminals. They prepare and attach baggage claim checks, stack baggage on carts or conveyors and may return baggage to patrons on receipt of claim check.
Rail intermodal equipment operator: Rail intermodal equipment operators assist in the loading of trailers and containers on and off railcars and chassis. They manoeuvre tractor-trailer combinations around tight corners and in and out of parking spaces. They use an on-board computer peripheral to communicate with yard management computer system and to identify railcars.
Canning and bottling line operator: Canning and bottling line operators observe bottles and cans passing by during the production process. They stand next to conveyors belts to ensure that bottles are filled to standard levels that there are no major deviations. They discard defective bottles or cans.
Block machine operator: Block machine operators control, maintain and operate concrete blocks casting machine which fills and vibrate molds to compact wet concrete into finished blocks.
Wood pallet maker: Wood pallet makers create wood pallets for use in storage, shipping and manipulation of goods. Pallet makers operate a machine that takes in usually low-grade softwood planks treated with heat or chemicals and nails them together. The material and shape of the pallets, the treatment methods, and the number and pattern of nails used are all highly standardised to make exchange of used pallets possible.
Aquaculture hatchery worker: Aquaculture hatchery workers are active in the production of aquatic organisms in land-based hatchery processes. They assist in the process of raising organisms throughout the early stages of their life cycle and the release of organisms when necessary.
Stevedore: Stevedores sort, handle, load and unload freight into over-the-road equipment in accordance with oral and written instructions, as well as state regulations. They move freight such as boxes, bulky items, or even large pallets of goods to and from storage areas and onto transport vehicles.
Animal feed operator: Animal feed operators tend various animal feed processing machines in industrial plants such as mixing machines, filling machines, and loading machines.
Aquaculture husbandry worker: Aquaculture husbandry workers are active in the production of aquatic organisms in land-based on-growing processes. They assist in the process of raising organisms through all stages of their life cycle.
Forklift operator: Forklift operators are responsible for operating forklifts to move, locate, relocate, stack, and count merchandise. They are accountable for the safe and efficient operation of forklifts. Moreover, they perform the filling of orders and check the accuracy of other orders.

Operate forklift is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Motor vehicles parts advisor: Motor vehicles parts advisors sell motor vehicle parts, order parts and identify alternative parts.
Lime kiln operator: Lime kiln operators control equipment that burns limestone to produce lime or carbon dioxide. They control the flow of the materials, fuel, and air and observe the material flow, air, temperature, fuel charts, and oxygen gauges and make adjustments if necessary. They also keep production records.
High rigger: High riggers assemble and hoist temporary suspension structures on heights to support performance equipment. Their work is based on instruction, plans and calculations. Their job can include rope access, working above colleagues, assemble constructions to lift performers and lifting heavy loads, which makes it a high risk occupation. They work indoor as well as outdoor. They cooperate with ground riggers to unload and assemble constructions on ground level.
Pipe welder: Pipe welders assemble and install parts and components of pipelines for the transport of goods such as water, steam and chemicals through them. They interpret specs such as pneumatics, hydraulics, for installation on site according to the safety and production requirements.
Set builder: Set builders construct, build, prepare, adapt and maintain scenic elements used on stage and for filming movies or television programs. They use a wide variety of materials like wood, steel, aluminium and plastics. Their work is based on artistic vision, scale models, sketches and plans. They work in close cooperation with the designers and may build exibition stands for fairs, carnavals and other events.
Wood drying kiln operator: Wood drying kiln operators control the process of applying heat to moist or ‘green’ wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Recycling worker: Recycling workers clean materials and remove waste, and ensure the waste and collected materials are sorted in the appropriate recycling containers. They also dismantle vehicles and sort the parts collected, and deposit recyclable materials onto conveyor belts where they can be further sorted.
Stone engraver: Stone engravers use hand tools, machines and chemical products to etch and carve patterns and inscriptions on stone surfaces.
Cylinder filler: Cylinder fillers operate and maintain the equipment and containers used to fill cylinders with gases in liquefied or compressed state.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
Stone driller: Stone drillers operate the drilling machine that bores holes into stone blocks. They manipulate granit, sandstone, marble and slate according to specifications.
V-belt finisher: V-belt finishers operate machines to make V-belts flexible. They also position belts on machines that measures the length of the belt and stamps identifying information on it.
Event scaffolder: Event scaffolders set up and dismantle temporary seating, stages and structures to support performance equipment, artists and audience. Their job can include rope access, working above colleagues and lifting heavy loads, which makes it a high risk occupation. Their work is based on instruction, plans and calculations. They work indoors as well as outdoors.
Fish production operator: Fish production operators regulate and supervise fish product manufacturing facilities. They keep stock of all required ingredients and equipment for mass manufacturing. They also perform processes such as moulding, breading, frying, freezing, setting the system’s temperature and checking speeds.
Tent installer: Tent installers set up and dismantle temporary shelters, tents and circus tents with the associated accommodation for events and performances. Their work is based on instruction, plans and calculations. They work mostly outdoors and can be assisted by local crew.
Belt builder: Belt builders make transmission and conveyor belts by building up plies of rubberised fabric. They cut the ply to requird length with scissors and bond plies together with rollers and stitchers. Belt builders insert the finished belt between the pressure rollers. They measure the finished belt to check if it conforms to specifications.
V-belt builder: V-belt builders form V-belts out of calendered rubber rolls. They measure the amount of rubber needed and cut it with scissors. V-belt builders brush rubber cement on sides of the belt. They put belts on the drum to compress materials together and cut the belt to specified width with a knife.
Stone splitter: Stone splitters operate and maintain machines that split stone. They manipulate stone into different forms such as blocks, cobbles, tiles and concrete products. 
Chemical processing plant controller: Chemical processing plant controllers control the chemical production process. They operate machines and systems, being responsible to monitor and maintain the equipment and the instruments in control.
Wood treater: Wood treaters apply treatments to wood to make it resistant to environmental factors like mould, cold, moisture, or staining. Treatments may also contribute to the colour of the wood. Wood treaters may use chemicals, heat, gasses, UV light, or a combination of these to treat wood.
Roofer: Roofers cover structures with roofs. They install the weight-bearing elements of a roof, either flat or pitched, then cover it with a weatherproof layer.
Geothermal power plant operator: Geothermal power plant operators operate and maintain equipment, often steam-driven turbines, which produce electrical energy. They monitor measuring equipment to ensure the safety of operations, and that the production needs are met. They also react to system problems, and repair faults. They may regulate the generators to control the flow of electricity to the power lines.
Stone polisher: Stone polishers operate grinding and polishing tools and equipment in order to smooth stones.
Mover: Movers are responsible for the physical handling of goods and belongings to be relocated or transported from one place to the other. They disassemble goods, machinery or belongings for transporting and assemble or install them in the new location. They ensure that objects are well protected and packed, secured and placed correctly in trucks and transports.
Ground rigger: Ground riggers assist level riggers assembling temporary suspension structures to support performance equipment. Their work is based on instruction and plans. They work indoor as well as outdoor. They cooperate closely with high riggers.
 
Dry press operator: Dry press operators press dry tempered clay or silica into bricks and other shapes. They select and fix the pressing dies, using rule and wenches. Dry press operators remove the bricks from the press machine and stack them in a specified pattern on the kiln car.
Food production operator: Food production operators supply and perform one or more tasks in different stages of the food production process. They perform manufacturing operations and processes to foods and beverages, perform packaging, operate machines manually or automatically, follow predetermined procedures, and take food safety regulations on board.
V-belt coverer: V-belt coverers operate machines that cover belts with rubberised fabric. They cut the fabric after one revolution of the belt.
Stonemason: Stonemasons manually carve and assemble stone for construction purposes. While CNC operated carving equipment is the industry standard, artisanal carving for ornamental stone is still done manually.
Sorter labourer: Sorter labourers sort recyclable materials and waste from a recycling stream, and ensure no unsuitable materials wind up among the recyclable materials. They inspect the materials and perform cleaning duties, and work in compliance with waste regulations.

References

1. Operate forklift – ESCO