Use personal protection equipment

Make use of protection equipment according to training, instruction and manuals. Inspect the equipment and use it consistently.

oversee PPE
examine personal safety gear
use equipment for personal protection
oversee personal protection equipment

skill/competence

cross-sector

Use personal protection equipment is essential to master the following skills:

Work with respect for own safety

Use personal protection equipment is an essential skill of the following occupations:

Slate mixer: Slate mixers operate and maintain slate mixing machines that mix multicolored slate granules used for asphalt-coated roofing felt surfacing.
Video operator: Video operators control the (projected) images of a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the operators work closely together with the designers, operators and performers. Video operators prepare media fragments, supervise the setup, steer the technical crew, program the equipment and operate the video system. Their work is based on plans, instructions and other documentation.
 
Automated fly bar operator: Automated fly bar operators control the movements of sets and other elements in a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the operators work closely together with the designers, operators and performers. Automated fly bar operators prepare and supervise the setup, program the equipment and operate automated fly bar systems, rigging systems or systems for horizontal movement. Their work is based on plans, instructions and calculations. The manipulation of heavy loads close to or above performers and audience makes this a high risk occupation.

 
Water network operative: Water network operatives maintain pipes and pumping stations used for water supply, waste water removal and sewerage. They perform planned maintenance and repair tasks and clear blockages in pipes and drains.
Chemist: Chemists perform laboratory research by testing and analysing the chemical structure of substances.They translate the research results into industrial production processes which are further used in the development or improvement of products. Chemists are also testing the quality of the manufactured products and their environmental impact.
Sound operator: Sound operators control the sound of a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the operators work closely together with the designers and performers. They prepare audio fragments, supervise the setup, steer the technical crew, program the equipment and operate the sound system. Their work is based on plans, instructions and other documentation.
 
Intelligent lighting engineer: Intelligent lighting engineers set up, prepare, check and maintain digital and automated lighting equipment in order to provide optimal lighting quality for a live performance. They cooperate with road crew to unload, set up and operate lighting equipment and instruments.
Water engineering technician: Water systems engineering technicians aid engineers in the development and implementation of water supply and water treatment systems. They monitor the operations to ensure compliance with health and safety regulations, check water quality and ensure implementation of water-related legislation.
Radiation protection technician: Radiation protection technicians monitor radiation levels in buildings and facilities to ensure compliance with health and safety standards, and to prevent dangerous elevations in the radiation level. They take measures to minimise radiation emissions, and to prevent further contamination in the event of radiation pollution, by developing radiation protection plans, in particular for nuclear plants and facilities.
High rigger: High riggers assemble and hoist temporary suspension structures on heights to support performance equipment. Their work is based on instruction, plans and calculations. Their job can include rope access, working above colleagues, assemble constructions to lift performers and lifting heavy loads, which makes it a high risk occupation. They work indoor as well as outdoor. They cooperate with ground riggers to unload and assemble constructions on ground level.
Stage manager: Stage managers coordinate and supervise the preparation and execution of the show to ensure the scenic image and the actions on stage comply with the artistic vision of the director and the artistic team.
Identify needs, monitor the technical and artistic processes during rehearsals and performances of live shows and events, according to the artistic project, the characteristics of the stage and technical, economic, human and security terms.

 
Snow-clearing worker: Snow-clearing workers operate trucks and plows to remove snow and ice from public sidewalks, streets and other locations. They also dump salt and sand on the ground to de-ice the concerning locations.
Sewerage cleaner: Sewerage cleaners maintain and clean sewerage systems and their pipes within communities. They remove blockages that stop the sewerage flow to ensure the smooth running of the systems.
Pest management worker: Pest management workers identify, eliminate and repel pests by applying specific chemical solutions, setting traps and other equipment to control pests such as rats, mice and cockroaches. They apply pesticides and clean and remove pests after extermination. Their tasks might include elimination of fungi, moisture or insects. They inform and advise clients, residents and facility owners on after care and preventive methods to keep away pests.
Refuse vehicle driver: Refuse vehicle drivers drive the large vehicles used for refuse collection. They drive the vehicles from the homes and facilities where the refuse is collected by the refuse collectors on the lorry and transport the waste to the waste treatment and disposal facilities.
Water quality analyst: Water quality analysts safeguard the quality of water through scientific analysis, ensuring quality and safety standards are met. They take samples of the water and perform laboratory tests, and develop purification procedures so it can serve as drinking water, for irrigation purposes, and other water supply purposes.
Dresser: Dressers assist and support artists before, during and after the performance to ensure the performers costumes are in line with the artistic vision of the director and the artistic team. They ensure the costume quality, maintain, check and repair costumes and assist with quick costume changes.

 
Audio production technician: Audio production technicians set up, prepare, check and maintain equipment in order to provide optimal sound quality for a live performance. They cooperate with road crew to unload, set up and operate sound equipment and instruments.
Set builder: Set builders construct, build, prepare, adapt and maintain scenic elements used on stage and for filming movies or television programs. They use a wide variety of materials like wood, steel, aluminium and plastics. Their work is based on artistic vision, scale models, sketches and plans. They work in close cooperation with the designers and may build exibition stands for fairs, carnavals and other events.
Glass engraver: Glass engravers engrave lettering and ornamental designs onto glass articles, using engravers hand tools. They sketch and lay out the lettering and designs on the article, cut the design in the article and finish it.
Glass polisher: Glass polishers finish plate glass to make a variety of glass products. They polish the edges of the glass using grinding and polishing wheels, and spray solutions on glass or operate vacuum coating machines to provide a mirrored surface.
Plastic heat treatment equipment operator: Plastic heat treatment equipment operators manipulate plastic products using machinery such as furnaces or flame-hardening machines in order to temper, anneal or heat-treat. They set up the machinery and read the production instructions to determine the furnace temperature. Plastic heat treatment equipment operators remove products from machines, let them cool down, examine and test products to see if they conform to specifications.
Scenic painter: Scenic painters decorate sets for live performances. They employ a broad variety of crafting and painting techniques such as figurative painting, landscape painting and Trompe-l’œil to create convincing scenes. Their work is based on artistic vision, sketches and pictures. They work in close cooperation with the designers.
Recycling worker: Recycling workers clean materials and remove waste, and ensure the waste and collected materials are sorted in the appropriate recycling containers. They also dismantle vehicles and sort the parts collected, and deposit recyclable materials onto conveyor belts where they can be further sorted.
Injection moulding operator: Injection moulding operators operate and monitor injection moulding machines, in order to cast products from thermoplastic materials. They regulate the temperature, pressure, and volume of plastic, according to pre-defined specifications. Injection moulding operators also remove finished products and cut-away excess material, using a knife or other hand tools.
Street sweeper: Street sweepers operate sweeping equipment and machinery to remove waste, leaves or debris from streets. They maintain records of sweeping operations and maintain, clean and perform minor repairs to the equipment used.
Pesticides sprayer: Pesticides sprayers mix pesticides, insecticides, fungicides, and other chemical solutions, and apply them via technical equipment such as sprayers on trees, plants and lawns. They clean and maintain operating machinery and ensure the overall safety in designated areas.
Stage machinist: Stage machinists manipulate sets and other elements in a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the stage machinists work closely together with the designers, operators and performers. Stage machinists prepare and perform the setup, execute changeovers and operate manual fly bar systems. Their work is based on plans, instructions and calculations.
Metal annealer: Metal annealers operate electric or gas kilns to soften metal so it can be cut and shaped more easily. They heat the metal to a specific temperature and / or colour and then slowly cool it, both according to specifications. Metal annealers inspect the metals through the entire process to observe any flaws.
Pyrotechnician: Pyrotechnicians control the pyrotechnical elements of a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the operators work closely together with the designers, operators and performers. Pyrotechnicians prepare the pyrotechnics, supervise the setup, steer the technical crew, program the equipment and operate the pyro system. The use of explosive and combustible material close to performers and audience makes this a high risk occupation.
 
Scenery technician: Scenery technicians setup, prepare, check and maintain pre-assembled sets in order to provide optimal scenery quality for a live performance. They cooperate with road crew to unload, set up and move equipment and sets.
Pottery and porcelain caster: Pottery and porcelain casters fill moulds with clay to cast pottery and porcelain wares. They pour excess slip out of the mould when needed, drain moulds, remove the cast from the mould, smooth the casting surfaces to remove marks and place the castings on boards to dry.
V-belt finisher: V-belt finishers operate machines to make V-belts flexible. They also position belts on machines that measures the length of the belt and stamps identifying information on it.
Event scaffolder: Event scaffolders set up and dismantle temporary seating, stages and structures to support performance equipment, artists and audience. Their job can include rope access, working above colleagues and lifting heavy loads, which makes it a high risk occupation. Their work is based on instruction, plans and calculations. They work indoors as well as outdoors.
Vacuum forming machine operator: Vacuum forming machine operators tend, control, and maintain machines that heat sheets of plastic before moving them around a mould, using vacuum-suction; when these sheets become cool, they are permanently set in the shape of the mould.
Sewerage network operative: Sewerage network operatives maintain sewerage systems which remove and transport wastewater and sewerage. They inspect pipes, pumping stations, and mains, looking for leaks or other faults, and repair any problems. They clear blockages, and perform maintenance duties, using network maps and specialised software.
Instrument technician: Instrument technicians assist and support musicians before, during and after the performance to ensure the instruments and the connected equipment, the backline, are setup properly. They maintain, check, tune and repair instruments and assist with quick changes.
 
Rubber goods assembler: Rubber goods assemblers manufacture rubber products such as water bottles, swim fins, and rubber gloves. They fasten ferrules, buckles, and straps to rubber goods, and also wrap fabric tape around closures and ferrules.
Pipeline maintenance worker: Pipeline maintenance workers operate different equipment to keep the suitability of the pipelines. They perform checks for deviations and administer chemicals according to the needs and cleaning aim (e.g. corrosion shunning)

Nuclear technician: Nuclear technicians function as aids to physicists and engineers in nuclear laboratories and power plants. They monitor the procedures to ensure safety and quality control, and maintain equipment. They also handle and control radioactive equipment and measure radiation levels to ensure safety.
Prop maker: Prop makers construct, build, prepare, adapt and maintain props used on stage and for filming movies or television programs. Props may be simple imitations of real life objects, or may include electronic, pyrotechnical, or other effects. Their work is based on artistic vision, sketches and plans. They work in close cooperation with the designers involved in the production.
Groundwater monitoring technician: Groundwater monitoring technician monitor the environment, gathering data in the form of samples and performing tests in a laboratory or field, to investigate potential sources of pollution. They also perform maintenance tasks on the monitoring equipment.
Head of workshop: Heads of workshop coordinate specialised workshops that construct, build, prepare, adapt and maintain elements used on stage. Their work is based on artistic vision, schedules and overall production documentation. They liaise with the designers involved in the production, the production team and other services of the organisation.
Light board operator: Light board operators control the lighting of a performance based on the artistic or creative concept, in interaction with the performers. Their work is influenced by and influences the results of other operators. Therefore, the operators work closely together with the designers, operators and performers. Light board operators prepare and supervise the setup, steer the technical crew, program the equipment and operate the lighting system. They may be responsible for conventional or automated lighting fixtures and, in some instances, controlling video as well. Their work is based on plans, instructions and other documentation.
 
Miniature set designer: Miniature set designers design and build miniature props and sets of motion pictures. They build models used for visual effects that meet the look and requirements of the production Miniature set designers cut material using hand tools to construct three-dimensional props and sets.
Filament winding operator: Filament winding operators tend, control and maintain machines that coat filament, usually fibreglass or carbon, in resin and wind them around a rotation mould to produce pipes, containers, tubes and other hollow cylindrical products.
Blow moulding machine operator: Blow moulding machine operators operate and monitor blow moulding machine to mould plastic goods, according to requirements. They regulate temperature, air pressure and volume of plastic, according to specifications. Blow moulding machine operators remove finished products and cut away excess material, using a knife. They regrind surplus material and rejected workpieces for reuse, using a grinding machine.
Plastic rolling machine operator: Plastic rolling machine operators operate and monitor machines to produce plastic rolls, or to flatten and reduce the material. They examine raw materials and finished products to make sure they are according to specifications.
Tent installer: Tent installers set up and dismantle temporary shelters, tents and circus tents with the associated accommodation for events and performances. Their work is based on instruction, plans and calculations. They work mostly outdoors and can be assisted by local crew.
Belt builder: Belt builders make transmission and conveyor belts by building up plies of rubberised fabric. They cut the ply to requird length with scissors and bond plies together with rollers and stitchers. Belt builders insert the finished belt between the pressure rollers. They measure the finished belt to check if it conforms to specifications.
Cake press operator: Cake press operators set up and tend the hydraulic presses that compress and bake plastic chips into cake moulds to produce plastic sheets. They regulate and adjust the pressure and temperature.
Asbestos abatement worker: Asbestos abatement workers remove asbestos from buildings and other constructions, compliant with health and safety regulations concerning the handling of hazardous materials. They investigate the intensity of the asbestos contamination, prepare the structure for removal, and prevent contamination of other areas.
Glass annealer: Glass annealers operate electric or gas kilns used to strengthen the glass products by a heating-cooling process, making sure the temperature is set according to specifications. They inspect the glass products  through the entire process to observe any flaws.
Lighting technician: Lighting technicians setup, prepare, check and maintain equipment in order to provide optimal lighting quality for live performances and motion pictures. They cooperate with road crew to unload, set up and operate lighting equipment and instruments.
Stone splitter: Stone splitters operate and maintain machines that split stone. They manipulate stone into different forms such as blocks, cobbles, tiles and concrete products. 
Chimney sweep: Chimney sweeps undertake cleaning activities of chimneys for all types of buildings. They remove ash and soot and perform maintenance on a regular basis, following health and safety regulations. Chimney sweeps may perform safety inspections and minor repairs.
Video technician: Video technicians set up, prepare, check and maintain equipment in order to provide optimal projected image quality for a live performance. They cooperate with road crew to unload, set up and operate video equipment and instruments.
Building exterior cleaner: Building exterior cleaners remove dirt and litter from a building’s exterior, as well as perform restoration tasks. They ensure the cleaning methods are compliant with safety regulations, and monitor the exteriors to ensure they are in proper condition.
Steam turbine operator: Steam turbine operators operate and maintain machinery which generates power. They ensure the safety of the operations and monitor operations to detect problems, and react to emergency situations.
Fibre machine tender: Fibre machine tenders operate and maintain extrusion machines that form sliver from filaments. They work with synthetic materials such as fiberglass or liquid polymer or non-synthetic materials such as rayon.
Stage technician: Stage technicians control different aspects of a performance based on the artistic or creative concept, in interaction with the performers. They prepare and perform the setup, program the equipment and operate various  systems. Stage technicians take care of lighting, sound, video, sets and/or fly systems. Their work is based on plans, instructions and calculations. They can work in small venues, theatres and other small artistic productions.
Costume maker: Costume makers construct, sew, stitch, dye, adapt and maintain costumes to be used in live performances and in movies or television programs. Their work is based on artistic vision, sketches or finished patterns combined with knowledge of the human body to ensure the wearer maximum range of movement. They work in close cooperation with the designers.
 
Mineral crushing operator: Mineral crushing operators operate and monitor crushers and other machines to crush materials and minerals. They move stones to the crushers, fill the machines with minerals, monitor the crushing process and ensure that the end products meet requirements.
Wig and hairpiece maker: Wig and hairpiece makers create adapt and maintain hair prostheses for use in live performance. They work from sketches, pictures and artistic visions combined with knowledge of the human body to ensure the wearer maximum range of movement. They work in close cooperation with the designers.
 
Prop master/prop mistress: Prop masters/mistresses setup, prepare, check and maintain objects used on stage by actors or other small movable objects called props. They cooperate with road crew to unload, set up and prepare the props. During a performance they position props, hand them over or take them back from the actors.
Radiation protection officer: Radiation protection officers are responsible for the protection from harmful effects caused by exposure to ionising radiation. They ensure compliance with legislation and regulations by enforcing safety measures. Furthermore they develop radiation protection plans in particular for nuclear plants and facilities.
Flying director: Flying directors design people flying effects for a performance and supervise or perform the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. They train the actors for the flying choreography and manipulate them during the performance. Therefore, the flying directors work closely with artistic directors, operators, performers and the artistic team. Flying directors prepare and supervise the setup, perform security checks and operate the person fly systems. They are trained to react appropriately to emergencies that may occur in connection to performance flying. Their work is based on plans, instructions and calculations. The manipulation of persons on height, close to or above performers and audience makes this a high risk occupation.
Nitroglycerin neutraliser: Nitroglycerin neutralisers maintain explosives mixing tanks by neutralizing the process remaining acids.
Mask maker: Mask makers construct, adapt and maintain masks for live performances. They work from sketches, pictures and artistic visions combined with knowledge of the human body to ensure the wearer maximum range of movement. They work in close cooperation with the designers.
Pultrusion machine operator: Pultrusion Machine Operators tend, control, and maintain machines which enable the production of composite materials with consistent cross-sections by adding reinforcement fibres such as fibreglass to the existing material and coating the resulting material with resin; this then is pulled through a heated dye where it becomes cured.
Advertising installer: Advertising installers attach posters and other advertisement materials on buildings, buses and underground transport and in other public places such as shopping malls, in order to attract the attention of passersby. They use equipment to climb buildings and reach higher places, following health and safety regulations and procedures.
Glass beveller: Glass bevellers measure, cut, assemble and install flat glass and mirrors. They also load and unload glass, mirrors and equipment, drive to installation sites, install metal or wood frameworks that need to be fitted with glass, and work according to client specifications.
Ground rigger: Ground riggers assist level riggers assembling temporary suspension structures to support performance equipment. Their work is based on instruction and plans. They work indoor as well as outdoor. They cooperate closely with high riggers.
 
Stagehand: Stagehands assist stage technicians setting up and preparing equipment for live performance. Their work includes setting up the scenery, lights, sound, props, rigging, and special effects for a production.
 
Fight director: Fight directors coach performers to safely execute fight sequences. They direct fights for performances such as dance, movies and television, circus, variety, and others. Fight directors may have a background in sports such as fencing, shooting or boxing, martial arts such as judo, wushu or karate, or military training.
Followspot operator: Followspot operators control follow spots based on the artistic or creative concept, in interaction with the performers. Follow spots are specialized lighting instruments, designed to follow performers or movements on stage. Movement, size, beam width and color are controlled manually. Therefore, the operators work closely together with the light board operators and performers. Their work is based on instructions and other documentation. Their work can include working on heights, in bridges or above an audience.
Wax bleacher: Wax bleachers operate and maintain filter presses and tanks, used in wax bleaching, for candle production processes.
Rubber dipping machine operator: Rubber dipping machine operators dip forms into liquid latex to manufacture rubber products such as balloons, finger cots or prophylactics. They mix the latex and pour it into the machine. Rubber dipping machine operators take a sample of latex goods after final dip and weigh it. They add ammonia or more latex to machine if the product does not meet requirements.
V-belt coverer: V-belt coverers operate machines that cover belts with rubberised fabric. They cut the fabric after one revolution of the belt.
Event electrician: Event electricians set up and dismantle temporary, reliable electrical systems to support events. They work in locations without access to the power grid as well as locations with temporary power access. Their work is based on instruction, plans and calculations. They work indoors as well as outdoors. They cooperate closely with technical crew and operators.
Compression moulding machine operator: Compression moulding machine operators set up and operate machines to mould plastic products, according to requirements. They select and install dies on press. Compression moulding machine operators weigh the amount of premixed compound needed and pour it into the die well. They regulate the temperature of dies.
Handyman: Handymen perform various maintenance and repair activities for buildings, grounds and other facilities. They repair and renovate structures and components, fences, gates and roofs, assemble furniture and perform plumbing and electrical activities. They check heating and ventilation systems, air quality and humidity in the building.

Use personal protection equipment is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Lighting designer: Lighting designers develop a lighting design concept for a performance and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. During rehearsals and performance they coach the operators to obtain optimal timing and manipulation. Lighting designers develop lighting plots, cue lists and other documentation to support the operators and production crew. Lighting designers sometimes also work as autonomous artists, creating light art outside a performance context.
Puppet designer: Puppet designers design and create puppets and manipulable objects for performers. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. Puppet designers make puppets and manipulable objects out of a variety of materials, and may build robotic elements into them. Puppet designers sometimes also work as autonomous artists, creating outside a performance context.
 
Steam engineer: Steam engineers provide energy and utilities to facilities, such as steam, heat and refrigeration. They operate and maintain equipment such as boilers and air compressors, and research and develop new methods and improvements for the provision of utilities.
Hand brick moulder: Hand brick moulders create unique bricks, pipes, and other heat-resistant products using hand moulding tools. They create moulds according to specifications, clean and oil them, insert and remove the mixture from the mould. Then, they let the bricks dry in kiln before finishing and smoothing the end products.
Water treatment systems operator: Water treatment system operators treat water to ensure safety for drinking, irrigation, or other use. They operate and maintain water treatment equipment and ensure the water is safe for bottling and use in food production by thoroughly testing before distribution, and by meeting environmental standards.
Special forces officer: Special forces officers operate in specialised missions such as counter terrorism missions. They perform combat and intelligence missions in order to impede with enemy equipment and installations, and to gather information on enemy strategy and movement.
Pipeline pump operator: Pipeline pump operators tend pump equipment and systems to transfer liquids and substances (e.g. such as chemical solutions, crude oil, gases, and others) from one point to the next. They operate hoses, pumps, and other equipment according to the good to be transferred. They ensure smooth circulation and flow of the goods in the pipelines.
Police detective: Police detectives gather and compile evidence which assists them in the solution of crimes. They use investigative techniques to gather evidence, and interview all parties connected to their line of enquiry, and cooperate with other police department divisions to gather the evidence.
Soap maker: Soap makers operate equipments and mixers that produce soap, making sure the end product is produced according to specified formula.
Heating, ventilation, air conditioning and refrigeration engineering technician: Heating, ventilation, air conditioning and refrigeration engineering technicians aid in the design of devices which provide heating, ventilation, air conditioning and possibly refrigeration in buildings. They ensure the equipment complies with environmental standards. They handle hazardous materials used in the systems, and ensure safety precautions are in place.
Sewerage maintenance technician: Sewerage maintenance technicians inspect sewers and pipeline systems. They do this by using moving video cameras, whose recordings tell them whether they need to perform any maintenance and repair on these types of systems.
Corrosion technician: Corrosion technicians monitor the integrity from a pipeline and provide repairs to it if needed. They ensure that the pipelines are properly connected and are in line with the health and safety regulations. Corrosion technicians inspect cathodic protection systems and pipeline connection points for corrosion. They may also assist in the designing of pipelines, analyse soil and write reports on technical issues.
Drain technician: Drain technicians install and maintain drainage equipment used in sewer systems, such as pipes and valves. They analyse the design and ensure the proper installation of the drainage system, and perform maintenance and repair duties.
Water treatment plant manager: Water treatment plant managers supervise water treatment, storage and distribution in a water plant. They ensure the plant’s operations are compliant with regulation, and supervise staff. They also implement new policies, and oversee equipment maintenance.
Police officer: Police officers use investigation methods to prevent crime, to pursue and apprehend criminals, and protect the public from violent and criminal activities. They perform surveillance and patrol activities to prevent crimes and apprehend offenders. They provide support to victimised parties and the public at large, and fulfil administrative duties.
Pipeline engineer: Pipeline engineers design and develop the engineering aspects for the construction of pipeline infrastructures in various kinds of sites (e.g. inland, maritime). They envision and create the specifications for pumping systems and for the general transport of goods through pipelines.
Lifeguard instructor: Lifeguard instructors teach future (professional) lifeguards the necessary programmes and methods needed to become a licensed lifeguard. They provide training on safety supervision of all swimmers, assessment of potentially hazardous situations, rescue-specific swimming and diving techniques, first aid treatment for swimming-related injuries, and they inform students on preventative lifeguard responsibilities. They ensure students are aware of the importance of checking safe water quality, heeding risk management and being aware of the necessary protocols and regulations regarding lifeguarding and rescuing. They monitor the students’ progress, evaluate them through theoretical and practical tests and award the lifeguard licenses when obtained.
Make-up and hair designer: Make-up and hair designers develop a design concept for make-up and hair of performers and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. Make-up and hair designers develop sketches, design drawings or other documentation to support the workshop and performance crew. Make-up designers sometimes also work as autonomous artists, creating make-up art outside a performance context.
 
Manufacturing manager: Manufacturing managers plan, oversee and direct the manufacturing process in an organisation. They ensure products and services are efficiently produced within the timeframe and budget given.
Police trainer: Police trainers train probationary, new academy recruits, or cadets, and seasoned veterans on the theory and practice necessary to become a police officer. They conduct theoretical lectures on academic subjects such as law, government regulations, community relations and human diversity. Police academy instructors also provide more hands-on, practical instruction regarding physical training, the care of firearms, first aid, self defensive tactics and vehicle operations. They also prepare and develop lesson plans and new training programmes as new law enforcement-related regulations and issues arise. The instructors monitor the students’ progress, evaluate them individually and prepare performance evaluation reports.
Camera operator: Camera operators setup and operate digital film cameras to shoot domestic motion pictures or television programs. They work together with the video and motion picture director, the director of photography, or the private client. Camera operators give advice on how to shoot scenes to actors, the video and motion picture director and other camera operators.
Steam plant operator: Steam plant operators operate and maintain mechanical equipment such as stationary engines and boilers to provide utilities for domestic or industrial use. They monitor proceedings to ensure compliance with safety regulations, and perform tests to ensure quality.
Artillery officer: Artillery officers offer support in battle in the fields of target acquisition, coordination of information, surveillance and weaponry. They are in charge of tactics, and deployment of weaponry on the field. They also lead soldiers.
Sound designer: Sound designers develop a sound design concept for a performance and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. Sound designers prepare audio fragments to be used in a performance, which can involve recording, composing, manipulating and editing. During rehearsals and performance they coach the operators to obtain optimal timing and manipulation. Sound  designers develop plans, cue lists and other documentation to support the operators and production crew. Sound designers sometimes also work as autonomous artists, creating sound art outside a performance context.
Water plant technician: Water plant technicians maintain and repair water treatment and supply equipment in a water plant. They ensure the provision of clean water by measuring the water quality, ensuring it is filtered and treated correctly, and maintaining distribution systems.
Automated assembly line operator: Automated assembly line operators operate, maintain and clean production machines. They are responsible for the assembly of a whole product or a part of a product. Automated assembly line operators perform all tasks in a production process via a rotation system.
Set designer: Set designers develop a set concept for a performance and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. During rehearsals and performance they coach the operators to obtain optimal timing and manipulation. Set designers develop sketches, design drawings, models, plans or other documentation to support the workshop and performance crew. They may also design exhibition stands for fairs and other events. 
Septic tank servicer: Septic tank servicers clean and maintain septic systems. They repair damages and faults, and ensure the tanks are cleaned and maintained, operating cleaning and maintenance machinery, in compliance with safety procedures.
Precast moulder: Precast moulders handcast decorative and structural concrete building products such as fireplace units, blocks or coloured tiles. They use a portable concrete-mixing machine.
Production potter: Production potters process and form clay, by hand or by using the wheel, into end-products pottery, stoneware products, earthenware products and porcelain. They introduce the already shaped clay into kilns, heating them at a high temperature in order to remove all the water from the clay.
Gas service technician: Gas service technicians install and maintain gas service appliances and systems in facilities or buildings. They install the equipment in accordance with regulations, repair faults, and investigate leaks and other problems. They test the equipment and advise on the use and care of appliances and systems which use gas energy.
Pyrotechnic designer: Pyrotechnic designers develop a pyrotechnical design concept for a performance and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the pyrotechnic designers work closely with artistic directors, operators and the artistic team. During rehearsals and performance they coach the operators to obtain optimal timing and manipulation. Pyrotechnic designers develop plans, cue lists and other documentation to support the operators and production crew. Pyrotechnic designers sometimes also work as autonomous artists, creating pyrotechnical art outside a performance context.
Energy engineer: Energy engineers design new, efficient and clean ways to produce, transform, and distribute energy to improve environmental sustainability and energy efficiency. They extract energy through natural resources, such as oil or gas, or renewable and sustainable sources, such as wind or solar power. 
Infantry soldier: Infantry soldiers fight in combat missions or provide aid in peacekeeping missions and other humanitarian services. They handle weapons and provide defence services where they are required, and attempt to complete missions while causing minimal harm.
Armed forces officer: Armed forces officers supervise operations and manoeuvres, assign duties, and command subordinate staff. They ensure efficient communication within and between units and perform training duties. They also operate equipment and supervise equipment maintenance.
Video designer: Video designers develop a projected image design concept for a performance and supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. Video designers prepare media fragments to be used in a performance, which can involve recording, composing, manipulating and editing. During rehearsals and performance they coach the operators to obtain optimal timing and manipulation. Video  designers develop plans, mapping, cue lists and other documentation to support the operators and production crew. Video designers sometimes also work as autonomous artists, creating video art outside a performance context.
Police inspector: Police inspectors coordinate and supervise a division in a police department. They ensure the division’s compliance with rules and regulations, and monitor the performance of personnel as well as assigning tasks to them. They perform administrative duties to ensure the maintenance of records and reports, and may also develop regulatory guidelines.
Costume designer: Costume designers develop a costume design concept for a performance, a movie or a television program. They supervise the execution of it. Their work is based on research and artistic vision. Their design is influenced by and influences other designs and must be conform with these designs and the overall artistic vision. Therefore, the designers work closely with artistic directors, operators and the artistic team. Costume designers develop sketches, design drawings, patterns or other documentation to support the workshop and performance crew.
 
Wastewater treatment operator: Wastewater treatment operators operate equipment used in a water or wastewater plant. They treat and clean drinking water before it is distributed to the consumer and process wastewater to remove harmful substances before returning it to rivers and seas. They take samples and perform tests to analyse the water quality.
Wastewater treatment technician: Wastewater treatment technicians aid wastewater treatment operators in the operation and maintenance of wastewater treatment equipment, and the purification procedure of wastewater, in sewage plants. They perform repair duties.
Hydropower engineer: Hydropower engineers research, design and plan the building of facilities that generate electricity from the movement of water. They search optimal locations, conduct trials and try different materials to achieve the best result. Hydropower engineers develop strategies for more efficient energy production and analyse environmental consequences.
Squadron leader: Squadron leaders command a squadron specialising in different operations, such as aircraft squadrons, ground operations squadrons, or armoured fighting vehicles squadrons.
Refuse collector: Refuse collectors remove waste from homes and other facilities and put it in the bin lorry so it can be transported to a treatment and disposal facility. They assist the driver of the bin lorry, help unload the waste, and record the amount of refuse collected. They may also collect waste from construction and demolition sites, and hazardous waste.
Emergency response worker: Emergency response workers work in missions to aid in emergency and disaster situations, such as natural disasters or oil spills. They clean up the debris or waste caused by the event, ensure the people involved are brought to safety, prevent further damage, and transport goods such as food and medical supplies.
Electric meter technician: Electric meter technicians install and maintain electric meter systems in facilities or buildings. They install the equipment in accordance with regulations and repair faults and other problems. They test the equipment and advise on the use and care.
Sorter labourer: Sorter labourers sort recyclable materials and waste from a recycling stream, and ensure no unsuitable materials wind up among the recyclable materials. They inspect the materials and perform cleaning duties, and work in compliance with waste regulations.

References

1. Use personal protection equipment – ESCO