Program a CNC controller

Set up the desired product design in the CNC controller of the CNC machine for product manufacturing.

arrange a product control process
schedule a CNC controller
oversee a product control process
oversee a CNC controller
arrange a CNC controller
plan a CNC controller
schedule a product control process
plan a product control process

skill/competence

cross-sector

Program a CNC controller is an essential skill of the following occupations:

Engraving machine operator: Engraving machine operators set up, programme, and tend engraving machines designed to precisely carve a design in the surface of a metal workpiece by a diamond stylus on the mechanical cutting machine that creates small, separate printing dots existing from cut cells. They read engraving machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the precise engraving controls, such as the depth of the incisions and the engraving speed.
Grinding machine operator: Grinding machine operators set up, program and control grinding machines, designed to apply abrasive processes in order to remove small amounts of excess material and smoothen metal workpieces by using an abrasive wheel with diamond teeth as a cutting device for very precise and light cuts. They read grinding machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the grinding controls, such as the depth of cuts and the rotation speed.
Metal sawing machine operator: Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges blade(s). They also trim clean finished shapes out of metal using tin snips, metal shears or wire cutters.  They also smoothen and trim sharp or rough edges using various tools.
Computer numerical control machine operator: Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for programming the machines, ensuring the required parameters and measurements are met while maintaining the quality and safety standards.
Numerical tool and process control programmer: Numerical tool and process control programmers develop computer programs to control automatic machines and equipment involved in manufacturing processes. They analyse blueprints and job orders, conduct computer simulations and trial runs.
Laser beam welder: Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat source that allows for precise welding.
Electron beam welder: Electron beam welders set up and tend machines designed to join separate metal workpieces together through the use of a high-velocity electron beam. They monitor the machining processes providing an alteration in the kinetic energy of the electrons that allows for them to transform into heat for the metal to melt and join together in a process of precise welding.
Punch press operator: Punch press operators set up and tend punch presses designed to cut workpieces into their desired shape by propelling a hydraulic ram to punch holes into them with a single die set that pushes through the top dead centre, through the surface, and to the bottom dead centre of the workpiece.

Program a CNC controller is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Table saw operator: Table saw operators work with industrial saws that cut with a rotating circular blade. The saw is built into a table. The operator sets the height of the saw to control the depth of the cut. Particular attention is paid to safety, as factors such as natural stresses within the wood may produce unpredictable forces.
Riveter: Riveters assemble several metal parts together by riveting guns, rivet set and hammers, or by operating a riveting machine that all perform the purpose of drilling holes on the rivet shank of the metal part and of inserting rivets, bolts, into these holes in order to fasten them together.
Plasma cutting machine operator: Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature hot enough to melt and cut the metal by burning it and works at a speed that blows away the molten metal from the clear cut.
Spark erosion machine operator: Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused by electric voltage and separated by a dielectric liquid, which removes pieces of metal from the electrodes These applications can involve transmission and optical microscopy.
Water jet cutter operator: Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or an abrasive substance mixed with water.
Vessel assembly supervisor: Vessel assembly supervisors coordinate the employees involved in boat and ship manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity. Vessel assembly supervisors train employees in company policies, job duties and safety measures. They check compliance with applied working procedures and engineering. Vessel assembly supervisors oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Veneer slicer operator: Veneer slicer operators slice lumber into thin sheets to be used as a cover for other materials, such as particle board or fibre board. Veneer slicers may use various machines to obtain different cuts of wood: a rotary lathe to produce cuts peripendicular to the growth rings, a slicing machine to create plank-like cuts, or a half-round lathe which gives the operator the freedom to make a selection of the most interesting cuts.
Lacquer maker: Lacquer makers operate and maintain laquers and syntetic paints mixers and jar mills, making sure the end product is according to formula.
Carpenter: Carpenters cut, shape and assemble wooden elements for the construction of buildings and other structures. They also use materials such as plastic and metal in their creations. Carpenters create the wooden frames to support wood framed buildings.
Screw machine operator: Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized ones that have been turned by a lathe and turn machine.
Computer hardware engineering technician: Computer hardware engineering technicians collaborate with computer hardware engineers in the development of computer hardware, such as motherboards, routers, and microprocessors. Computer hardware engineering technicians are responsible for building, testing, monitoring, and maintaining the developed computer technology.
Planer thicknesser operator: Planer thicknesser operators use machinery to shave wood planks to a uniform thickness. The machine usually planes both sides of the plank in one operation. They feed the plank into the machine carefully to prevent excess planing at the edge known as ‘snipe’.
Stone engraver: Stone engravers use hand tools, machines and chemical products to etch and carve patterns and inscriptions on stone surfaces.
Sheet metal worker: Sheet metal workers in construction use sheet metal to construct roofs, ducts for heating, ventilation and air-conditioning, gutters and other metal structures. They read plans and determine the type and amount of materials to be used, then measure, bend, cut, shape, and attach pieces of sheet metal to create the required structure.
Automation engineering technician: Automation engineering technicians collaborate with automation engineers in the development of applications and systems for the automation of the production process. Automation engineering technicians build, test, monitor, and maintain the computer-controlled systems used in automated production systems.
Oxy fuel burning machine operator: Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the metal workpiece to its kindling temperature and subsequently burns it into a metal oxide upon its reaction with an emitted stream of oxygen, flowing out of the workpiece’s created kerf as slag.
Stamping press operator: Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a bolster plate and a die attached to a stamping ram on the metal, resulting in the die producing smaller metal parts of the workpiece fed to the press.
Lathe and turning machine operator: Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved by computer-controlled motors. They read lathe and turning machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the lathe controls, such as the depth of cuts and the rotation speed.
Metal nibbling operator: Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine.
Structural ironworker: Structural ironworker in construction install iron elements into structures. They erect steel frameworks for buildings, bridges and other construction projects. They set metal rods, or rebar, to form reinforced concrete.
Metal rolling mill operator: Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of rolls in order to decrease the metal’s thickness and to make it homogeneous. They also take into account the proper temperature for this rolling process.
Wooden furniture machine operator: Wooden furniture machine operators run machines that manufacture wooden furniture parts, according to the established operating procedure. They ensure the machine works smoothly and repair parts if necessary.
Thread rolling machine operator: Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die against metal blank rods, creating a larger diameter than those of the original blank workpieces.
Sawmill operator: Sawmill operators work with automated lumber mill equipment which saws timber into rough lumber. They also handle various sawing machines which further process the lumber in various shapes and sizes. These processes are nowadays often computer controlled.
Carpenter supervisor: Carpenter supervisors monitor carpentry operations in construction. They assign tasks and take quick decisions to resolve problems. They pass their skills on to apprentice carpenters.
Shipwright: Shipwrights build and repair small type of water vessels from pleasure craft to naval vessels. They prepare preliminary sketches and create templates. They use hand and power tools to construct smaller boat themselves or supervise a team of shipbuilders. They also construct cradles and slipways for the ship’s construction, transportation, launching and slipping. Depending on the vessels, they might work with different materials such as metal, wood, fibreglass, aluminium etc.
Router operator: Router operators set up and operate multi-spindle routing machines, in order to hollow-out or cut various hard materials such as wood, composites, aluminium, steel, plastics; and others, such as foams. They are also able to read blueprints to determine cutting locations and specific sizes.
Extrusion machine operator: Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it into a continuous profile with a preset cross section such as tubes, pipes and sheeting. They may also clean and maintain the equipment.
Milling machine operator: Milling machine operators set up, program and control milling machines, designed to cut excess material from metal workpieces using a computer-controlled rotary-cutting, milling cutter. They read milling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the depth of cuts or the rotation speed.
Structural ironwork supervisor: Structural ironwork supervisors monitor ironworking activities. They assign tasks and take quick decisions to resolve problems.
Straightening machine operator: Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle and the height of the straightening rolls and select the settings for the pressing force required to straighten the workpiece, taking into account the end product’s yield strenght and size, without excess work hardening.
Band saw operator: Band saw operators work with industrial saws that feature a continuous flexible blade revolving around two or more wheels. Band saws are most effective at producing irregular shapes.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Rubber products machine operator: Rubber products machine operators operate machines which knead, blend, calender, mould, extrude and cure rubber products from natural and synthetic rubber. They measure the ingredients for mixing and load them into the machine. Rubber products machine operators monitor and control the tempature, pressure and speed during production.
Laser cutting machine operator: Laser cutting machine operators set up, program and tend laser cutting machines, designed to cut, or rather burn off and melt, excess material from a metal workpiece by directing a computer-motion-controlled powerful laser beam through laser optics. They read laser cutting machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the milling controls, such as the intensity of the laser beam and its positioning.
Spring maker: Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring.
Varnish maker: Varnish makers operate equipment and mixers for varnish production, by melting, mixing and cooking the required chemical ingredients, according to specifications.
Wood router operator: Wood router operators work with industrial routers to cut wood into the desired shape. Routers have a routing head that moves over the wood, going up and down to regulate the depth of the incision. Contemporary industrial wood routers usually are computer controlled for extremely fine and consistent results.
Drilling machine operator: Drilling machine operators set up, program and control drilling machines, designed to drill holes in workpieces using a computer-controlled, rotary-cutting, multipointed cutting tool, inserted into the workpiece axially. They read drilling machine blueprints and tooling instructions, perform regular machine maintenance, and make adjustments to the drilling controls, such as the depth of drills or the rotation speed.
Tool and die maker: Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce these tools in all steps of the production process. They design the tools and dies, then cut and shape them to size and finish them by manually operated machine tools, power tools, hand tools, or programming and tending CNC tool and die making machines.
Mechatronics engineering technician: Mechatronics engineering technicians collaborate with engineers in the development of mechatronic devices and applications through a combination of mechanical engineering, electronic engineering, and computer engineering. They build, test, install, and calibrate mechatronics and solve technical problems.
Stonemason: Stonemasons manually carve and assemble stone for construction purposes. While CNC operated carving equipment is the industry standard, artisanal carving for ornamental stone is still done manually.

References

1. Program a CNC controller – ESCO