Ensure aircraft compliance with regulation

Ensure that every aircraft complies with applicable regulation and all components and equipment have officially valid components.

oversee aircraft regulation compliance
supervise aircraft regulation compliance
ensure compliance of aircraft equipment and components with regulation
supervise compliance of aircraft with regulation
ensure compliance of aircraft with regulation
maintain aircraft regulation compliance
ensure aircraft equipment and components comply with regulation
control aircraft regulation compliance
ensure aircraft complies with regulation

skill/competence

sector-specific

Ensure aircraft compliance with regulation is an essential skill of the following occupations:

Air traffic safety technician: Air traffic safety technicians provide technical support regarding the safety of air traffic control and navigation systems. They design, maintain, install and operate these systems both in the airport and on board the aeroplane according to regulations.
Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Aerospace engineering technician: Aerospace engineering technicians work with aerospace engineers to operate, maintain and test equipment used on aircraft and spacecraft. They review blueprints and instructions to determine test specifications and procedures. They use software to make sure that parts of a spacecraft or aircraft are functioning properly. They record test procedures and results, and make recommendations for changes.
Helicopter pilot: Helicopter pilots fly helicopters in order to transport passengers and cargo from one place to another. They plan flights using aeronautical charts and navigation instruments. Prior to departure, they inspect helicopters following checklists to detect leaking hydraulic fluid, inoperative control, low fuel level, or other unsafe conditions.
Airline transport pilot: Airline transport pilots fly large aircrafts with a maximum take-off weight of more than 5700 kilograms, to transport passengers, mail, or freight on long or short-haul flights for leisure, business or commercial purposes. They have the overall responsibility for the safe and efficient operation of aircrafts and the safety of crew and passengers.
Flight test engineer: Flight test engineers work with other systems engineers to plan the tests in detail and to make sure that the recording systems are installed for the required data parameters. They analyse the data collected during test flights and produce reports for individual test phases and for the final flight test. They are also responsible for the safety of the test operations.
Co-pilot: Co-pilots are responsible for assisting captains by monitoring the flight instruments, handling radio communications, watching for air traffic, and taking over for the pilot as needed. They adhere to the pilot’s commands, flight plans, and regulations and procedures of aviation national authorities, companies, and airports.
Aircraft assembly inspector: Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction or damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Second officer: Second officers are responsible for monitoring and controlling various aircraft systems including fixed-wing and rotary wing. They work in close coordination with the two pilots during all phases of flight. They make pre-flight, inflight, and post flight inspections, adjustments, and minor repairs. They verify parameters such as passenger and cargo distribution, the amount of fuel, aircraft performance, and appropriate engine speed according to instructions of pilots.
Aerospace engineer: Aerospace engineers develop, test and oversee the manufacture of flight vehicles such as aircrafts, missiles, and spacecrafts. The field of engineering they are active in, can be divided into two branches: aeronautical engineering and astronautical engineering.

Ensure aircraft compliance with regulation is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Aircraft assembly supervisor: Aircraft assembly supervisors coordinate the employees involved in aircraft manufacturing and schedule their activities. They prepare production reports and recommend measures to reduce the cost and improve productivity such as hiring, ordering new equipment and implementing new production methods. They train employees in company policies, job duties and safety measures. They oversee the supplies and communicate with other departments to avoid unnecessary interruptions of the production process.
Aircraft pilot: Aircraft pilots control and navigate aircraft. They operate the mechanical and electrical systems of the aircraft and transport people, mail and freight.

References

1. Ensure aircraft compliance with regulation – ESCO