Read standard blueprints

Essential for

• Aircraft engine assembler
  Aircraft engine assemblers build and install prefabricated parts to form aircraft engines, such as lightweight piston engines and gas turbines. They review specifications and techn…
• Container equipment assembly supervisor
  Container equipment assembly supervisors monitor the assembly process of containers such as boilers or pressure vessels. They train and coach the workers involved in the assembly t…
• Automotive battery technician
  Automotive battery technicians assemble, install, inspect, maintain and repair batteries in motor vehicles. They use electrical test equipment to confirm good working condition aft…
• Commissioning technician
  Commissioning technicians work with commissioning engineers to supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning o…
• Aircraft engine specialist
  Aircraft engine specialists advise on maintaining procedures to engines of aircrafts and helicopters. They perform operability tests to components and parts of aircrafts to diagnos…
• Fluid power technician
  Fluid power technicians install and assemble equipment that uses liquid or gas pressure to transmit or regulate power. They also perform tests on and maintain this equipment. Other…
• Precision mechanics supervisor
  Precision mechanics supervisors oversee, train and manage workers who fit together complex parts of small-size machines such as measuring or control mechanisms. Duties Here are som…
• Engraving machine operator
  Engraving machine operators set up, programme, and tend engraving machines designed to precisely carve a design in the surface of a metal workpiece by a diamond stylus on the…
• Mechatronics assembler
  Mechatronics assemblers assemble and maintain complex mechatronic equipment and machines, such as robots, elevators, and advanced home appliances. They build the mechanical, electr…
• Electrical equipment inspector
  Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies…
• Grinding machine operator
  Grinding machine operators set up, program and control grinding machines, designed to apply abrasive processes in order to remove small amounts of excess material and smoothen meta…
• Vessel assembly supervisor
  Vessel assembly supervisors coordinate the employees involved in boat and ship manufacturing and schedule their activities. They prepare production reports and recommend measures t…
• Electronic equipment inspector
  Electronic equipment inspectors check electronic equipment for any defects and malfunctions. They ensure that the equipment is correctly assembled according to specifications and n…
• Rotating equipment engineer
  Rotating equipment engineers develop designs and specifications for rotating equipment according to any applicable standards. They also provide technical expertise and help ensure …
• Printed circuit board test technician
  Printed circuit board test technicians inspect and test printed circuit boards. They perform a range of printed circuit board testing procedures and may perform minor repairs. Duti…
• Fiberglass laminator
  Fiberglass laminators mould fiberglass materials to form hulls and boat decks. They read blueprints and use hand and power tools to cut the composite materials. They apply waxes an…
• Boat rigger
  Boat riggers use hand and power tools to install motors, gauges, controls and accessories such as batteries, lights, fuel tanks and ignition switches. They also perform pre-deliver…
• Casting mould maker
  Casting mould makers create metal, wooden or plastic models of the finished product to be cast. The patterns are then used to create moulds, eventually leading to the casting …
• Optical instrument repairer
  Optical instrument repairers repair optical instruments, such as microscopes, telescopes, camera optics, and compasses. They test the instruments to ensure they function properly. …
• Instrumentation engineering technician
  Instrumentation engineering technicians assist instrumentation engineers in the development of control equipment, such as valves, relays, and regulators, which can be used to monit…
• Wood technology engineer
  Wood technology engineers develop materials and components made of wood, construct production facilities and control and monitor the production. They also examine products and mate…
• Marine surveyor
  Marine surveyors inspect vessels intended for operations in maritime or open sea waters. They ensure that vessels and equipment follow the regulations laid down by the Internationa…
• Automated optical inspection operator
  Automated optical inspection operators (AOI operators) operate automated optical inspection machines to inspect assembled printed circuit boards. They read blueprints and insp…
• Metal sawing machine operator
  Metal sawing machine operators set up and operate metal sawing machines designed to cut excess metal from a metal workpiece by the use of a (or several) large toothed-edges…
• Model maker
  A Model Maker is a skilled professional who constructs detailed, scaled models of various objects, structures, or concepts for industries such as architecture, film, product design…
• Optical instrument production supervisor
  Optical instrument production supervisors coordinate, plan and direct the optical instrument production process. They make sure the optical glass is processed properly and optical …
• Automotive engineering technician
  Automotive engineering technicians work with automotive engineers to operate, repair, maintain and test equipment used in motor vehicles. In some environments, such as an airport, …
• Drain technician
  Drain technicians install and maintain drainage equipment used in sewer systems, such as pipes and valves. They analyse the design and ensure the proper installation of the drainag…
• Electromechanical engineering technician
  Electromechanical engineering technicians collaborate with electromechanical engineers in the development of electromechanical equipment. Electromechanical engineering technicians …
• Surface-mount technology machine operator
  Surface-mount technology machine operators use surface-mount technology (SMT) machines to mount and solder small electronic components onto printed circuit boards to create su…
• Pneumatic systems technician
  Pneumatic systems technicians use blueprints and technical documentation to assemble and install equipment operated by gas or air under pressure. They set up the systems according …
• House builder
  House builders construct, maintain and repair houses or similar small buildings using a range of techniques and materials of several construction building workers. Duties The dutie…
• Computer numerical control machine operator
  Computer numerical control machine operators set-up, maintain and control a computer numerical control machine in order to execute the product orders. They are responsible for prog…
• Boilermaker
  Boilermakers operate a variety of equipment and machinery to create, repipe and retube hot water and steam boilers, producing them in all steps of the production process. They cut,…
• Lathe and turning machine operator
  Lathe and turning machine operators set up, program and tend lathe and turning machines designed to cut excess metal from a metal workpiece using a hardened cutting tool moved…
• Automotive electrician
  Automotive electricians install, maintain and repair electrical and electronic systems in motor vehicles such as air conditioning systems, lamps, radios, heating systems, batteries…
• Railway car upholsterer
  Railway car upholsterers create manufacturing templates, manufacture and assemble interior components for train carriages. They use power tools, hand tools and CNC machines to prep…
• Numerical tool and process control programmer
  Numerical tool and process control programmers develop computer programs to control automatic machines and equipment involved in manufacturing processes. They analyse blueprints an…
• Motorcycle assembler
  Motorcycle assemblers fasten motorcycle parts and components together such as frames, wheels, engines etc. To do so, they use hand tools, power tools and other equipment such as CN…
• Commissioning engineer
  Commissioning engineers supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning of the equipment, facilities and plants …
• Motor vehicle parts assembler
  Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Moto…
• Aircraft gas turbine engine overhaul technician
  Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the e…
• Rolling stock engine tester
  Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test s…
• Aircraft maintenance engineer
  Aircraft maintenance engineers make preflight and postflight inspections, adjustments, and minor repairs to ensure safe and sound performance of aircrafts. They inspect aircraft pr…
• Electronics production supervisor
  Electronics production supervisors coordinate, plan and direct the electronics production process. They manage labourers working on the production line, oversee the quality of the …
• Rolling stock assembler
  Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rollin…
• Rolling stock engine inspector
  Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, p…
• Marine mechanic
  Marine mechanics are in charge of the engines and mechanical parts of the vessel and replace defective equipment and parts. They communicate with other crew members on the operatio…
• Vessel engine assembler
  Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboar…
• Motor vehicle engine inspector
  Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to en…
• Marine electrician
  Marine electricians install, maintain and repair electrical and electronic systems in vessels such as air conditioning systems, lamps, radios, heating systems, batteries, electrica…
• Aircraft assembly supervisor
  Aircraft assembly supervisors coordinate the employees involved in aircraft manufacturing and schedule their activities. They prepare production reports and recommend measures to r…
• Router operator
  Router operators set up and operate multi-spindle routing machines, in order to hollow-out or cut various hard materials such as wood, composites, aluminium, steel, plastics; and o…
• Electrical engineering technician
  Electrical engineering technicians work together with electrical engineers in electrical engineering research. They perform technical tasks and aid in the designing, testing, manuf…
• Milling machine operator
  Milling machine operators set up, program and control milling machines, designed to cut excess material from metal workpieces using a computer-controlled rotary-cutting, milling cu…
• Aircraft de-icer installer
  Aircraft de-icer installers assemble, install, test, maintain and repair mechanical de-icing and anti-icing systems that prevent ice accumulation or formation on aircrafts and spac…
• Vessel assembly inspector
  Vessel assembly inspectors use measuring and testing equipment to inspect and monitor boat and ship assemblies to ensure conformity to engineering specifications and to safety stan…
• Industrial maintenance supervisor
  Industrial maintenance supervisors organise and supervise the activities and maintenance operations of machines, systems and equipment. They ensure inspections are done according t…
• Aircraft assembler
  Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary …
• Electrical equipment production supervisor
  Electrical equipment production supervisors coordinate, plan and direct the production process of electrical equipment. They manage labourers working on the production line, overse…
• Aircraft assembly inspector
  Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standar…
• Industrial assembly supervisor
  Industrial assembly supervisors are in charge of organizing, planning and coordinating assembly operations. They keep track of all the work activities and manage the process for ef…
• Control panel tester
  Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and tes…
• Aircraft engine tester
  Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories. They position or give directions to workers positionin…
• Motor vehicle engine tester
  Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to wo…
• Avionics inspector
  Avionics inspectors inspect instruments, electrical, mechanical and electronic systems of aircrafts to ensure their compliance with the performance and safety standards. They also …
• Automotive brake technician
  Automotive brake technicians inspect, maintain, diagnose and repair braking, steering and suspension systems as well as wheels and tyres. Duties Automotive brake technicians typica…
• Road transport maintenance scheduler
  Road transport maintenance schedulers are responsible for the effective execution of all maintenance work control processes of vehicles for urban transport, and for the efficient a…
• Construction general contractor
  Construction general contractors take on the responsibility to deliver a construction project. They participate on bid processes for construction projects and hire subcontractors t…
• Laser cutting machine operator
  Laser cutting machine operators set up, program and tend laser cutting machines, designed to cut, or rather burn off and melt, excess material from a metal workpiece by directing…
• Computer hardware test technician
  Computer hardware test technicians conduct testing of computer hardware such as circuit boards, computer chips, computer systems, and other electronic and electrical components. Th…
• Calibration technician
  Calibration technicians test and calibrate electrical and electronic equipment. They read blueprints and other technical drawings to develop testing procedures for every product. D…
• Motor vehicle engine assembler
  Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and…
• Rolling stock assembly inspector
  Rolling stock assembly inspectors use measuring and testing equipment to inspect and monitor rolling stock assemblies to ensure conformity to engineering specifications and to safe…
• Laser beam welder
  Laser beam welders set up and tend laser beam welding machines designed to join separate metal workpieces together through the use of a laser beam radiating a concentrated heat…
• Aircraft interior technician
  Aircraft interior technicians manufacture, assemble and repair interior components for aircraft such as seats, carpeting, door panels, ceiling, lighting etc. They also replace ente…
• Motor vehicle upholsterer
  Motor vehicle upholsterers create manufacturing templates, manufacture and assemble interior components for cars, buses, trucks etc. They use power tools, hand tools and shop equip…
• Glass beveller
  Glass bevellers measure, cut, assemble and install flat glass and mirrors. They also load and unload glass, mirrors and equipment, drive to installation sites, install metal or woo…
• Crane technician
  Crane technicians assemble industrial and harbor cranes components. They install conveyors and controls. Crane technicians perform the final assembly on site and maintain and repai…
• Electromechanical equipment assembler
  Electromechanical equipment assemblers read and interpret blueprints, drawings and instructions to assemble or modify electromechanical equipment or devices. They inspect and test …
• Avionics technician
  Avionics technicians install, test, inspect and adjust electrical and electronic equipment such as navigation, communication and flight control systems in aircraft and spacecraft. …
• Vessel engine inspector
  Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LN…
• Rolling stock assembly supervisor
  Rolling stock assembly supervisors coordinate the employees involved in rolling stock manufacturing and schedule their activities. They prepare production reports and recommend mea…
• Precision instrument assembler
  Precision instrument assemblers read blueprints and assembly drawings to assemble precision instruments such as micrometers, gauges, thermostats and utility meters. They collect th…
• Motor vehicle assembly supervisor
  Motor vehicle assembly supervisors coordinate the employees involved in motor vehicle manufacturing and schedule their activities. They prepare production reports and recommend mea…
• Bicycle assembler
  Bicycle assemblers build, tune and ensure good working order of all types of bicycles such as mountain bikes, road bikes, children's bikes etc. They also assemble accessory product…
• Wood assembly supervisor
  Wood assembly supervisors monitor the various processes in the assembly of wood products. They have a thorough understanding of the production processes under their supervision and…
• Vessel engine tester
  Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engin…
• Metrology technician
  Metrology technicians apply their practical knowledge of metrology to calibrate measuring instruments, test equipment and analyse their performance. They ensure that the evaluated …
• Electron beam welder
  Electron beam welders set up and tend machines designed to join separate metal workpieces together through the use of a high-velocity electron beam. They monitor the machining proc…
• Drilling machine operator
  Drilling machine operators set up, program and control drilling machines, designed to drill holes in workpieces using a computer-controlled, rotary-cutting, multipointed cutting to…
• Tool and die maker
  Tool and die makers operate a variety of equipment and machinery designed to create metal tools and dies, which are both needed in several areas of manufacturing, and produce…
• Aircraft engine inspector
  Aircraft engine inspectors inspect all types of engines used for aircraft in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overha…
• Building inspector
  Building inspectors perform inspections of buildings to determine compliance with specifications for various focuses of assessment. They observe and determine the suitability of co…
• Motor vehicle body assembler
  Motor vehicle body assemblers fasten motor vehicle body parts and components together such as frames, doors, chassis and hoods. They use hand tools, power tools and other equipment…
• Surface treatment operator
  Surface treatment operators apply chemicals and paint to the material surface in order to protect against corrosion. They calculate the materials needed for surface protection. Oth…
• Punch press operator
  Punch press operators set up and tend punch presses designed to cut workpieces into their desired shape by propelling a hydraulic ram to punch holes into them with a…
• Rolling stock electrician
  Rolling stock electricians install, maintain and repair electrical and electronic systems in rail vehicles such as air conditioning systems, lamps, heating systems, electrical wiri…
• Motor vehicle assembler
  Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment fo…

Optional for

• Table saw operator
  Table saw operators work with industrial saws that cut with a rotating circular blade. The saw is built into a table. The operator sets the height of the saw…
• Riveter
  Riveters assemble several metal parts together by riveting guns, rivet set and hammers, or by operating a riveting machine that all perform the purpose of drilling holes on the…
• Production engineering technician
  Production engineering technicians plan production, follow up production processes and develop and test solutions to solve technical problems. They work closely with engineers and …
• Clock and watchmaker
  Clock and watchmakers make mechanical or electronic clocks and watches. They use precision hand tools or automated machinery to assemble the timing devices. Clock and watchmakers m…
• Plasma cutting machine operator
  Plasma cutting machine operators set up and operate plasma cutting machines designed to cut and shape excess material from a metal workpiece using a plasma torch at a temperature…
• Spark erosion machine operator
  Spark erosion machine operators set up and tend spark erosion machines designed to cut excess material from a metal workpiece by the use of electrical discharges, or sparks, caused…
• Container equipment assembler
  Container equipment assemblers manufacture containers such as boilers or pressure vessels. They read blueprints and technical drawings to assemble parts and to build piping and fit…
• Water jet cutter operator
  Water jet cutter operators set up and operate a water jet cutter, designed to cut excess material from a metal workpiece by using a high-pressure jet of water, or…
• Sewerage cleaner
  Sewerage cleaners maintain and clean septic tanks, sewerage systems and their pipes within communities. They remove blockages that stop the sewerage flow to ensure the smooth runni…
• Manufacturing cost estimator
  Manufacturing cost estimators collect and analyse data to evaluate the money, materials, labour and time required for manufacturing processes. They conduct analyses to identify (al…
• Waterway construction labourer
  Waterway construction labourers create and maintain canals, dams and other waterway structures such as coastal or inland water plants. They are responsible for the construction of …
• Greaser
  Greasers make sure industrial machines are properly lubricated to maintain operations. They use grease guns to oil machines. Greasers also perform basic maintenance and repair duti…
• Machine operator supervisor
  Machine operator supervisors coordinate and direct workers who set up and operate machines. They monitor the production process and the flow of materials, and they make sure that t…
• Screw machine operator
  Screw machine operators set up and tend mechanical screw machines designed to manufacture (threaded) screws out of processed metal workpieces, specifically small- to medium-sized o…
• Pneumatic engineering technician
  Pneumatic engineering technicians evaluate operating pneumatic systems and assemblies such as compressed air machines, and recommend modifications for more efficiency. They are als…
• Mechanical engineering drafter
  Mechanical engineering drafters convert mechanical engineers' designs and sketches into technical drawings detailing dimensions, fastening and assembling methods, and other specifi…
• Product development engineering technician
  Product development engineering technicians improve efficiency of product development, set up equipment and develop and test solutions to solve technical problems. They work closel…
• Electrician
  Electricians fit and repair electrical circuits and wiring systems. They also install and maintain electrical equipment and machinery. This work can be performed indoors as well as…
• Packing machinery engineer
  Packing machinery engineers are in charge of and responsible for packaging machinery. They maintain and improve technical standards, analyse results, set up improvement plans, and …
• Process engineering technician
  Process engineering technicians work closely with engineers to evaluate the existing processes and configure manufacturing systems to reduce cost, improve sustainability and develo…
• Mechanical engineer
  A Mechanical Engineer designs, develops, and maintains mechanical systems and devices used in industries such as manufacturing, energy, automotive, aerospace, and robotics. They ap…
• Oxy fuel burning machine operator
  Oxy fuel burning machine operators set up and tend machines designed to cut, or rather burn off, excess material from the metal workpiece using a torch that heats the…
• Stamping press operator
  Stamping press operators set up and tend stamping presses designed to form metal workpieces in their desired shape by applying pressure through the up and down movement of a…
• Maintenance and repair engineer
  A Maintenance and Repair Engineer is responsible for ensuring that machinery, equipment, and systems operate reliably and efficiently by performing regular maintenance, troubleshoo…
• Product quality inspector
  Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline. They observe, measure, test, and form questions in …
• Metal nibbling operator
  Metal nibbling operators cut detailed patterns from metal surfaces by using manual or powered metal nibblers, such as a handheld nibbling drill or a nibbling machine. Other titles …
• Consumer goods inspector
  Consumer goods inspectors evaluate assembled parts of consumer goods and products for compliance with specifications and defects in-line with clients' requirements and organisation…
• Metal rolling mill operator
  Metal rolling mill operators set up and tend metal rolling mills designed to form metal workpieces into their desired shape by passing them through one or several pairs of…
• Product assembly inspector
  Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients' requirements and organisational policies. They use measuring and …
• Thread rolling machine operator
  Thread rolling machine operators set up and tend thread rolling machines designed to form metal workpieces into external and internal screw threads by pressing a thread rolling die…
• Welder
  Welders operate welding equipment in order to join metal workpieces together. They can use fusion welding processes based on different techniques and materials. They also perform s…
• Metal production supervisor
  Metal production supervisors oversee the day-to-day working process and activities of the labourers in a metal fabrication factory. They supervise staff, create work schedules, mai…
• Fluid power engineer
  Fluid power engineers supervise the assembly, installation, maintenance, and testing of fluid power equipment in accordance with specified manufacturing processes. They create desi…
• Fitter and turner
  Fitters and turners use machine tools to create and modify metal parts according to set specifications in order to fit components for machinery. They ensure the finished components…
• Belt builder
  Belt builders make transmission and conveyor belts by building up plies of rubberised fabric. They cut the ply to required length with scissors and bond plies together with rollers…
• Slitter operator
  Slitter operators set up, operate, or tend machines, in order to cut, slit, bend, or straighten sheets of metal, paper, or other materials to specific widths. Slitter operators mus…
• Manufactured wooden building assembler
  Manufactured wooden building assemblers put together wooden elements for use in construction. The elements, or modules, may consist of walls with windows and doors built-in, or may…
• Quality engineering technician
  Quality engineering technicians work with quality engineers or managers to analyse and solve quality problems and improve productivity. They examine machines for imperfections and …
• Extrusion machine operator
  Extrusion machine operators set up, monitor and maintain machines which heat or melt raw materials, and pull or push the heated material through a shaped die to form it…
• Drafter
  Drafters prepare and create technical drawings using a special software or manual techniques, to show how something is built or works. They work closely with engineers, architects,…
• Agricultural equipment design engineer
  Agricultural equipment design engineers apply knowledge of engineering and biological science to solve various agricultural problems such as soil and water conservation and the pro…
• Straightening machine operator
  Straightening machine operators set up and tend straightening machines designed to form metal workpieces into their desired shape using pressing practices. They adjust the angle an…
• Band saw operator
  Band saw operators work with industrial saws that feature a continuous flexible blade revolving around two or more wheels. Band saws are most effective at producing irregular shape…
• Property appraiser
  Property appraisers undertake detailed analysis and investigation of properties in order to determine their value for sales, mortgage and insurance purposes. They compare the value…
• Rubber products machine operator
  Rubber products machine operators operate machines which knead, blend, calender, mould, extrude and cure rubber products from natural and synthetic rubber. They measure the ingredi…
• Mechanical engineering technician
  Mechanical engineering technicians provide technical support to mechanical engineers in producing and manufacturing mechanical machinery. They help make designs and adjustments and…
• Facilities manager
  Facilities managers perform strategic planning as well as routine operational planning related to buildings' administration and maintenance. They control and manage health and safe…
• Real estate surveyor
  Real estate surveyors undertake research in order to assess the value of property for tax purposes. They investigate multiple properties at once, using accurate appraisal technique…
• Industrial engineering technician
  Industrial engineering technicians assist industrial engineers in improving efficiency, safety and productivity in manufacturing plants. They conduct production studies, prepare la…
• Industrial machinery assembler
  Industrial machinery assemblers manufacture industrial equipment such as industrial robots, assembly line machines, and labeling machines. They use hand tools and computer-controll…
• Spring maker
  Spring makers operate a variety of equipment and machinery designed to manufacture different types of spring, including leaf, coil, torsion, clock, tension, and extension spring. D…
• Ornamental metal worker
  Ornamental metal workers use finishing equipment and machinery to shape and finish fabricated ornamental metal workpieces, often used for the installation process in construction, …
• Stone polisher
  Stone polishers operate grinding and polishing tools and equipment in order to smooth stones. Duties Stone polishers typically do the following: Place the blocks or slates on work …
• Product grader
  Product graders perform preventive and operational quality control on products and resources. They inspect, grade and evaluate the materials at various stages to make sure it confo…
• Wood router operator
  Wood router operators work with industrial routers to cut wood into the desired shape. Routers have a routing head that moves over the wood, going up and down to…
• Furniture assembler
  Furniture assemblers place together all parts of furniture and auxiliary items such as furniture legs and cushions. They may also fit springs or special mechanisms. Furniture assem…
• Metrologist
  A metrologist is a professional specializing in the measurement science, known as metrology. Metrologists play a crucial role in ensuring accuracy, precision, and consistency in me…
• Building construction worker
  Building construction workers prepare and maintain building construction activities on construction sites. They perform preparation and clean-up work in order to assist specialised…