Clean equipment

Perform cleaning routines after equipment use.

clean machinery
cleaning equipment
clean sporting devices
cleanse equipment
clean machines
clean apparatus
cleansing equipment

skill/competence

cross-sector

Clean equipment is an essential skill of the following occupations:

Factory hand: Factory hands assist machine operators and product assemblers. They clean the machines and the working areas. Factory hands make sure supplies and materials are replenished.
Vehicle cleaner: Vehicle cleaners clean and polish surfaces of external parts and interiors of vehicles.
Wood caulker: Wood caulkers drive oakum into the seams between planking in deck or hull of wooden ships to make them watertight. They mainly use hand tools to heat marine glue and force it into the seams. They can also hammer hemp ropes and cotton lines into the seams and smear hot pitch over them.
Screen printer: Screen printers tend a press that presses ink through a screen. Industrial screen printing is often used to print on materials that are hard to use with other processes, like rigid plastic surfaces.
Train cleaner: Train cleaners keep the interiors of trains tidy and clean. They clean out the bins in the different compartments, and perform other cleaning activities such as hoovering, mopping and deep cleaning.
Cotton gin operator: Cotton gin operators perform ginning operations for separating cotton fibres from the seeds. They tend bale presses and remove the processed bales from the gin. They perform machine maintenance and ensure smooth running of processing operations.

Clean equipment is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Air separation plant operator: Air separation plant operators control and maintain the equipment for nitrogen and oxygen extraction from air, ensuring the required operational parameters of pressure, flow and temperature are met. They perform product purity tests and monitor its transfer to storage tanks or to fill cylinders.
Textile machinery technician: Textile machinery technicians set up, maintain, inspect and repair mechanical and computer-controlled machinery used in textile manufacturing such as weaving, dyeing and finishing machines.
 
Asphalt plant operator: Asphalt plant operators extract raw materials such as sand and stones and operate mobile equipment for their transport to the plant. They tend automated machines to crush and sort out stones, and to mix the sand and stones with asphalt cement. They take samples to check the quality of the mix and arrange for its transport to the construction site.
Laundry ironer: Laundry ironers re-shape clothing items and linen and remove creases from them by using irons, presses and steamers. They clean and maintain the ironing and drying area and organise the items accordingly.
Bleacher operator: Bleacher operators tend a machine that bleaches wood pulp to serve in the production of white paper. Different bleaching techniques are used to complement the various pulping methods, and to obtain different grades of whiteness.
Glass polisher: Glass polishers finish plate glass to make a variety of glass products. They polish the edges of the glass using grinding and polishing wheels, and spray solutions on glass or operate vacuum coating machines to provide a mirrored surface.
Wood drying kiln operator: Wood drying kiln operators control the process of applying heat to moist or ‘green’ wood in order to obtain usable dry wood. Depending on the type of kiln, the drying operator will be responsible for moving the wood into and out of the kiln, temperature control, and ventilation.
Performance rental technician: Performance rental technicians manage technical equipment at concerts and other big events.
ATM repair technician: ATM repair technicians install, diagnose, maintain and repair automatic teller machines. They travel to their clients’ location to provide their services. ATM repair technicians use hand tools and software to fix malfunctioning money distributors.
Bindery operator: Bindery operators tend machines that bind printed or unprinted paper into volumes using staples, twine, glue or other binding technologies.
Paper machine operator: Paper machine operators tend a machine that takes in pulp slurry, spread it out over a screen, and drains out the water. The drained slurry is then pressed and dried to produce paper.
3D printing technician: 3D Printing technicians assist in the designing and programming of products, ranging from prosthetic products to 3D miniatures. They may also provide 3D printing maintenance, check 3D renders for customers and run 3D printing tests. 3D printing technicians can also repair, maintain and clean 3D printers.
Paper embosing press operator: Paper embossing press operators use a press to raise or recess certain areas of the medium, so as to create relief on the print. Two matching engraved dies are placed around the paper and pressure is applied to change the surface of the material.
Debarker operator: Debarker operators operate debarking machines to strip harvested trees of their bark. The tree is fed into the machine, after which the bark is stripped using abrasion or cutting.
Envelope maker: Envelope makers tend a machine that takes in paper and executes the steps to creat envelopes: cut and fold the paper and glue it, then apply a weaker food-grade glue to the flap of the envelope for the consumer to seal it.
Vacuum forming machine operator: Vacuum forming machine operators tend, control, and maintain machines that heat sheets of plastic before moving them around a mould, using vacuum-suction; when these sheets become cool, they are permanently set in the shape of the mould.
Paper stationery machine operator: Paper stationery machine operators work with machines that perform one or more operations on paper to make it suitable for specific markets, such as punching holes, perforating, creasing, and collating with a carbon coated sheet.
Froth flotation deinking operator: Froth flotation deinking operators tend a tank that takes in recycled paper and mixes it with water. The solution is brought to a temperature around 50°C Celsius, after which air bubbles are blown into the tank. The air bubbles lift ink particles to the surface of the suspension and form a froth that is then removed.
Paper bag machine operator: Paper bag machine operators tend a machine that takes in paper, folds it and glues it to produce paper bags of various sizes, shapes, and grades of strength.
Fibreglass machine operator: Fibreglass machine operators control and maintain the machine that sprays a mix of resin and glass fibers onto products such as bathtubs or boat hulls to obtain strong and lightweight composite end-products.
Book-sewing machine operator: Book-sewing machine operators tend a machine that stitches paper together to form a volume. They check that signatures are inserted the right way and the machine does not jam.
Wash deinking operator: Wash deinking operators operate a tank where recycled paper is mixed with water and dispersants to wash out printing inks. The solution, called a pulp slurry, is then dewatered to flush out the dissolved inks.
Filament winding operator: Filament winding operators tend, control and maintain machines that coat filament, usually fibreglass or carbon, in resin and wind them around a rotation mould to produce pipes, containers, tubes and other hollow cylindrical products.
Laminating machine operator: Laminating machine operators tend a machine that applies a plastic layer to paper to strenghten it and protect it from wetness and stains.
Fibre machine tender: Fibre machine tenders operate and maintain extrusion machines that form sliver from filaments. They work with synthetic materials such as fiberglass or liquid polymer or non-synthetic materials such as rayon.
Hot foil operator: Hot foil operators tend machines which apply a metallic foil on other materials using pressure cylinders and heating. They also mix colors, set up the appropriate machinery equipment and monitor printing.
Wood treater: Wood treaters apply treatments to wood to make it resistant to environmental factors like mould, cold, moisture, or staining. Treatments may also contribute to the colour of the wood. Wood treaters may use chemicals, heat, gasses, UV light, or a combination of these to treat wood.
Crosscut saw operator: Crosscut saw operators use a manual crosscut saw. Crosscut sawing is used for ‘felling’ and ‘bucking’ trees, or taking off the limbs to obtain logs. Crosscut sawyers may also work with smaller crosscut saws in a workshop to make manual cuts.
Pultrusion machine operator: Pultrusion Machine Operators tend, control, and maintain machines which enable the production of composite materials with consistent cross-sections by adding reinforcement fibres such as fibreglass to the existing material and coating the resulting material with resin; this then is pulled through a heated dye where it becomes cured.
Digester operator: Digester operators, or cooks, cook wood chips with soda ash or acid to separate the wood pulp from unwanted constituents. They test the resulting solution.
Rubber dipping machine operator: Rubber dipping machine operators dip forms into liquid latex to manufacture rubber products such as balloons, finger cots or prophylactics. They mix the latex and pour it into the machine. Rubber dipping machine operators take a sample of latex goods after final dip and weigh it. They add ammonia or more latex to machine if the product does not meet requirements.
Gas station operator: Gas station operators process gases for compression, transmission or recovery by using gas, steam or electric engine compressors. They perform chemical tests on gases and are responsible for pumps and pipelines operations.
Drapery and carpet cleaner: Drapery and carpet cleaners clean draperies and carpets for their clients by removing stains, dust or odors. They do this by applying chemical and repellent solutions and with the use of brushes or mechanical equipment.

References

1. Clean equipment – ESCO