Send faulty equipment back to assembly line

Send equipment that didn’t pass inspection back to the assembly line for re-assembly.

send out-of-order equipment back to assembly line
send damaged equipment back to
return faulty equipment to assembly line
send faulty equipment back to production line
return malfunctioning equipment to production line
send faulty equipments back to assembly line
send defective equipment back to assembly line

skill/competence

cross-sector

Send faulty equipment back to assembly line is an essential skill of the following occupations:

Printed circuit board test technician: Printed circuit board test technicians inspect and test printed circuit boards. They perform a range of printed circuit board testing procedures and may perform minor repairs.

Send faulty equipment back to assembly line is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Precision device inspector: Precision device inspectors make sure precision devices, such as micrometers and gauges, operate according to design specifications. They may adjust the precision devices and their components in case of any faults.
Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Container equipment assembly supervisor: Container equipment assembly supervisors monitor the assembly process of containers such as boilers or pressure vessels. They train and coach the workers involved in the assembly to achieve production goals.
Ammunition assembler: Ammunition assemblers put together explosives and other ammunition components. They perform this work in mass production in ammunition factories. The production itself focuses on the manufacturing of cartridges or projectiles.
Electrical equipment inspector: Electrical equipment inspectors check finished electrical products for physical defects and faulty electrical connections. They record inspection results and send faulty assemblies back to production.
Electronic equipment inspector: Electronic equipment inspectors check electronic equipment for any defects and malfunctions. They ensure that the equipment is correctly assembled according to specifications and national and international regulations.
Electronics engineering technician: Electronics engineering technicians work closely with electronics engineers in the development of electronic equipment and devices. Electronics engineering technicians are responsible for building, testing, and maintaining electronic devices.
Machinery assembly supervisor: Machinery assembly supervisors monitor the machinery assembly process. They train and coach assembly workers to achieve production goals.
Automated optical inspection operator: Automated optical inspection operators (AOI operators) operate automated optical inspection machines to inspect assembled printed circuit boards. They read blueprints and inspect the finished or in-process PCB assemblies for flaws or defects.
Battery test technician: Battery test technicians use positive and negative wired plugs to test battery’s resistance capacity. They also test rejected batteries to determine their flaws.
Product assembly inspector: Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. They use measuring and testing equipment to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They also provide detailed inspection documentation and recommend action where problems are discovered.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Rolling stock engine inspector: Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centers. They review administrative records, analyse the operating performance of engines and report their findings.
Automated assembly line operator: Automated assembly line operators operate, maintain and clean production machines. They are responsible for the assembly of a whole product or a part of a product. Automated assembly line operators perform all tasks in a production process via a rotation system.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Motor vehicle engine inspector: Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Vessel assembly inspector: Vessel assembly inspectors use measuring and testing equipment to inspect and monitor boat and ship assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Aircraft assembly inspector: Aircraft assembly inspectors use measuring and testing equipment to inspect and monitor aircraft assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction or damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Control panel tester: Control panel testers test the electrical control panels. They read blueprints to check if the wiring is connected correctly. Control panel testers use electrical measuring and testing equipment to detect malfunctions and may correct faulty wiring and components.
Aircraft engine tester: Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories.They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle engine tester: Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Avionics inspector: Avionics inspectors inspect instruments, electrical, mechanical and electronic systems of aircrafts to ensure their compliance with the performance and safety standards. They also examine maintenance, repair and overhaul work and review any modification to check its conformity to standards and procedures. They provide detailed inspection, certification and repair records.
Computer hardware test technician: Computer hardware test technicians conduct testing of computer hardware such as circuit boards, computer chips, computer systems, and other electronic and electrical components. They analyse the hardware configuration and test the hardware reliability and conformance to specifications.
Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Rolling stock assembly inspector: Rolling stock assembly inspectors use measuring and testing equipment to inspect and monitor rolling stock assemblies to ensure conformity to engineering specifications and to safety standards and regulations. They examine the assemblies to detect malfunction and damage and check repair work. They also provide detailed inspection documentation and recommend action where problems were discovered.
Vessel engine inspector: Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, fuel dual engines and, in some cases, marine steam engines in assembly facilities to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Wood assembly supervisor: Wood assembly supervisors monitor the various processes in the assembly of wood products. They have a thorough understanding of the production processes under their supervision and take quick decisions when required.
Vessel engine tester: Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, dual fuel engines and, in some cases, marine steam engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Aircraft engine inspector: Aircraft engine inspectors inspect all types of engines used for aircrafts in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

References

1. Send faulty equipment back to assembly line – ESCO