Record test data

Description

Record data which has been identified specifically during preceding tests in order to verify that outputs of the test produce specific results or to review the reaction of the subject under exceptional or unusual input.

Alternative labels

record trial data
document test data
record data of tests
record experiment data

Skill type

skill/competence

Skill reusability level

cross-sector

Relationships with occupations

Essential skill

Record test data is an essential skill of the following occupations:

Medical laboratory assistant: Medical laboratory assistants work under supervision of the biomedical scientist and carry out basic laboratory procedures. They work in the pre-analytical handling of samples such as checking the details of specimens received for analysis, maintaining analysers, loading reagents, and packaging specimens. They also perform clerical tasks such as monitoring the stock levels of reagents used in analysis.
Metallurgical technician: Metallurgical technicians provide technical support in researching and performing experiments on minerals, metals, alloys, oil and gas. They also assist in improving the methods of extraction.
Commissioning technician: Commissioning technicians work with commissioning engineers to supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning of the equipment, facilities and plants and when necessary they perform repairs and maintenance.
Fluid power technician: Fluid power technicians install and assemble equipment that uses liquid or gas pressure to transmit or regulate power. They also perform tests on and maintain this equipment.
Medical device engineer: Medical device engineers design and develop medical-technical systems, installations, and equipment such as pacemakers, MRI scanners, and X-ray machines. They monitor the whole manufacturing process from concept design to product implementation. activities undertaken include, among others, designing product improvements, developing methods and techniques to evaluate design suitability, coordinating initial production, developing test procedures, and designing manufacturing diagrams.
Microelectronics engineering technician: Microelectronics engineering technicians collaborate with microelectronics engineers in the development of small electronic devices and components such as micro-processors, memory chips, and integrated circuits for machine and motor controls. Microelectronics engineering technicians are responsible for building, testing, and maintaining the microelectronic systems and devices.
Pharmacologist: Pharmacologists study the manner in which drugs and medicaments interact with organisms, living systems, and their parts (i.e. cells, tissues, or organs). Their research aims at identifying substances that can be ingested by humans and that exert adequate biochemical functions for curing illnesses.
Production engineering technician: Production engineering technicians plan production, follow up production processes and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests, conduct tests collect data.
Wind energy engineer: Wind energy engineers design and install wind energy farms and equipment. They research and test locations to find the most productive location, test equipment such as wind-turbine blades, and develop strategies for more efficient energy production, and environmental sustainability.
Electromagnetic engineer: Electromagnetic engineers design and develop electromagnetic systems, devices, and components, such as electromagnets in loudspeakers, electromagnetic locks, conducting magnets in MRI’s, and magnets in electric motors.
Photonics engineering technician: Photonics engineering technicians collaborate with engineers in the development of photonic systems or components, usually in the form of optical equipment, such as lasers, lenses, and fibre optic equipment. Photonics engineering technicians build, test, install and calibrate optical equipment. They read blueprint and other technical drawings to develop testing and calibrating procedures.
Microsystem engineering technician: Microsystem engineering technicians collaborate with micro-system engineers in the development of microsystems or microelectromechanical systems (MEMS) devices, which can be integrated in mechanical, optical, acoustic, and electronic products. Microsystem engineering technicians are responsible for building, testing, and maintaining the microsystems.

Electronics engineering technician: Electronics engineering technicians work closely with electronics engineers in the development of electronic equipment and devices. Electronics engineering technicians are responsible for building, testing, and maintaining electronic devices.
Water quality analyst: Water quality analysts safeguard the quality of water through scientific analysis, ensuring quality and safety standards are met. They take samples of the water and perform laboratory tests, and develop purification procedures so it can serve as drinking water, for irrigation purposes, and other water supply purposes.
Automotive test driver: Automotive test drivers drive prototype and pre-production vehicles and assess their performance, safety and comfort. They test the models in various driving situations and prepare reports to help engineers improve their designs and identify problems. They can work for manufacturers, independent vehicle test organisations or automotive magazines.
Textile machinery technician: Textile machinery technicians set up, maintain, inspect and repair mechanical and computer-controlled machinery used in textile manufacturing such as weaving, dyeing and finishing machines.
 
Instrumentation engineering technician: Instrumentation engineering technicians assist instrumentation engineers in the development of control equipment, such as valves, relays, and regulators, which can be used to monitor and control processes. Instrumentation engineering technicians are responsible for building, testing, monitoring, and maintaining of equipment. They use wrenches, beam cutters, grind saws, and overhead cranes to build and repair equipment.
Lift installation supervisor: Lift installation supervisor monitor the installation of lifts. They keep an overview of the proceedings, assign tasks, and take quick decisions to resolve problems.
Engineered wood board grader: Engineered wood board graders inspect finished engineered wood products for quality issues such as inclomplete gluing, warping or blemishing. They also test load bearing qualities of the wood. Graders sort products for quality according to guidelines.
Pneumatic engineering technician: Pneumatic engineering technicians evaluate operating pneumatic systems and assemblies such as compressed air machines, and recommend modifications for more efficiency. They are also involved in the design of pneumatic systems and components such as circuits.
Medical device engineering technician: Medical device engineering technicians collaborate with medical device engineers in the design, development and production of medical-technical systems, installations, and equipment such as pacemakers, MRI machines, and X-ray devices. They build, install, inspect, modify, repair, calibrate, and maintain medical-technical equipment and support systems. Medical device engineering technicians  are responsible for the operational readiness, safe use, economic operation and the appropriate procurement of medical equipment and facilities in hospitals.
Quality engineer: Quality engineers define quality standards for the creation of products or services. They check to make sure the products and services are in compliance with the quality standards and they coordinate quality improvements.
Pulp grader: Pulp graders grade paper pulp based on a number of possible criteria, such as pulping process, raw materials, bleaching methods, yield, and fibre length.
Optoelectronic engineer: Optoelectronic engineers design and develop optoelectronic systems and devices, such as UV sensors, photodiodes, and LEDs. Optoelectronic engineering combines optical engineering with electronic engineering in the design of these systems and devices. They conduct research, perform analysis, test the devices, and supervise the research.
Computer hardware engineering technician: Computer hardware engineering technicians collaborate with computer hardware engineers in the development of computer hardware, such as motherboards, routers, and microprocessors. Computer hardware engineering technicians are responsible for building, testing, monitoring, and maintaining the developed computer technology.
Sewerage maintenance technician: Sewerage maintenance technicians inspect sewers and pipeline systems. They do this by using moving video cameras, whose recordings tell them whether they need to perform any maintenance and repair on these types of systems.
Sensor engineer: Sensor engineers design and develop sensors, sensor systems and products that are equipped with sensors. They plan and monitor the manufacture of these products.
Scientific laboratory technician: Scientific laboratory technicians carry out laboratory-based research, analysis and testing and support life science professionals. They sample, test, measure, research and analyse in areas such as biology, biotechnology, environmental science, forensic science and pharmacology. Scientific laboratory technicians also observe and monitor laboratory activities, record test sequences and analyse the results.
Electromechanical engineering technician: Electromechanical engineering technicians collaborate with electromechanical engineers in the development of electromechanical equipment. Electromechanical engineering technicians are responsible for building, installing, testing, monitoring, and maintaining the electromechanical equipment, circuits and systems. They test this by the use of test instruments such as oscilloscopes and voltmeters. Electromechanical engineering technicians also use soldering equipment and hand tools to repair electromechanical equipment.
Process engineering technician: Process engineering technicians work closely with engineers to evaluate the existing processes and configure manufacturing systems to reduce cost, improve sustainability and develop best practices within the production process.
Pneumatic systems technician: Pneumatic systems technicians use blueprints and technical documentation to assemble and install equipment operated by gas or air under pressure. They set up the systems according to engineering specifications and test them to ensure good functioning order. They may also perform maintenance and repair work on installed pneumatic equipment.
Automation engineering technician: Automation engineering technicians collaborate with automation engineers in the development of applications and systems for the automation of the production process. Automation engineering technicians build, test, monitor, and maintain the computer-controlled systems used in automated production systems.
Installation engineer: Installation engineers oversee and manage the installing of structures, which take often many years to design and construct. They ensure safety, avoid risks and they aim to the optimalisation of costs. Installation engineers also create constructive designs of systems and perform installation system testing. They determine the material needed for the construction of these systems and the costs, and use CAD software to design these systems.    
Forge equipment technician: Forge equipment technicians maintain and repair forge machinery such as presses and material handling equipment. They perform evaluations of the equipment, perform preventative maintenance activities, and repair faults. They also assist in the installation of the equipment and ensure proper functionality.
Moulding machine technician: Moulding machine technicians service machinery used in the casting and moulding of plastics and other materials. They calibrate the equipment, perform maintenance activities, examine finished products and repair faults.
Sensor engineering technician: Sensor engineering technicians collaborate with sensor engineers in the development of sensors, sensor systems, and products that are equipped with sensors. Their role is to build, test, maintain, and repair the sensor equipment.
Consumer goods inspector: Consumer goods inspectors evaluate assembled parts of consumer goods and products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. Consumer goods inspectors provide results and findings for reports. Inspected defects can be identified as being cracks, scratches, errors in sanding, and defects of moving parts.
Heating engineer: Heating engineers install and maintain gas, electric, oil, solid-fuel and multiple fuel heating and ventilation equipment as stand-alone heating and ventilation systems or build into machinery and transport equipment. They follow instructions and blueprints, perform maintance on systems, perform safety checks and repair the systems.
Rail maintenance technician: Rail maintenance technicians execute routine inspections of railway tracks, powerlines, signage stations, switches, and other railway infrastructure. They are also sent out to repair defects quickly, safely, and at any time of the day or night.
Commissioning engineer: Commissioning engineers supervise the final stages of a project when systems are installed and tested. They inspect the correct functioning of the equipment, facilities and plants to make sure they meet the requirements and specifications. They perform the necessary verifications and give approval to finalise the project.
Photonics engineer: Photonics engineers are concerned with the generation, transmission, transformation, and detection of light. They conduct research, design, assemble, test and deploy photonic components or systems in multiple application fields, from optical communications to medical instrumentation, material processing or sensing technology.
Electromechanical engineer: Electromechanical engineers design and develop equipment and machinery that use both electrical and mechanical technology. They make draughts and prepare documents detailing the material requisitions, the assembly process and other technical specifications. Electromechanical engineers also test and evaluate the prototypes. They oversee the manufacturing process.
Robotics engineering technician: Robotics engineering technicians collaborate with engineers in the development of robotic devices and applications through a combination of mechanical engineering, electronic engineering, and computer engineering. Robotics engineering technicians build, test, install and calibrate robotic equipment.
Heating, ventilation, air conditioning (and refrigeration) service engineer: Heating, ventilation, air conditioning (and refrigeration) service engineers install and maintain industrial heating, air conditioning and possibly refrigeration systems. They set up furnaces, thermostats, ducts, vents, and other equipment needed to ensure the controlled passage and treatment of air. They also carry out repairs.
Groundwater monitoring technician: Groundwater monitoring technician monitor the environment, gathering data in the form of samples and performing tests in a laboratory or field, to investigate potential sources of pollution. They also perform maintenance tasks on the monitoring equipment.
Microsystem engineer: Microsystem engineers research, design, develop, and supervise the production of microelectromechanical systems (MEMS), which can be integrated in mechanical, optical, acoustic, and electronic products.
Rolling stock engine tester: Rolling stock engine testers test the performance of diesel and electric engines used for locomotives. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.

Non-destructive testing specialist: Non-destructive testing specialists carry out testing of vehicles, vessels, other manufactured objects, and construction structures without having to damage them. They use special equipment such as X-ray, ultrasound, radiographics, or infrared instruments to perform testing activities and report based on the observed results.
Microelectronics engineer: Microelectronics engineers design, develop, and supervise the production of small electronic devices and components such as micro-processors and integrated circuits.
Computer hardware engineer: Computer hardware engineers design and develop computer hardware systems and components, such as circuit boards, modems, and printers. They draught blueprints and assembly drawings, develop and test the prototypes, and supervise the production process.
Quality engineering technician: Quality engineering technicians work with quality engineers or managers to analyse and solve quality problems and improve productivity. They examine machines for imperfections and inspect products to make sure they meet the standards. They also provide personnel with training in inspection techniques and prepare inspection plans.
Electrical engineering technician: Electrical engineering technicians work together with electrical engineers in electrical engineering research. They perform technical tasks and aid in the designing, testing, manufacturing and operation of electrical devices and facilities.

Optical engineer: Optical engineers design and develop different industrial applications with optics. They have knowledge of light, light transmission principles, and optics in order to design engineering specs of equipment such as microscopes, lenses, telescopes, and other optical devices.
Lumber grader: Lumber graders inspect lumber, or wood cut into planks. They test the lumber, look for irregularities and grade the wood based on quality and desirability of the pattern.
Fire safety tester: Fire safety testers conduct a variety of tests on materials such as building, transportation and textiles materials, as well as on fire prevention and fire fighting systems. They measures, among other things, the flame resistance and behaviour of materials under extreme circumstances.
Optomechanical engineer: Optomechanical engineers design and develop optomechanical systems, devices, and components, such as optical mirrors and optical mounts. Optomechanical engineering combines optical engineering with mechanical engineering in the design of these systems and devices. They conduct research, perform analysis, test the devices, and supervise the research.
Construction equipment technician: Construction equipment technicians inspect, maintain and repair heavy-duty vehicles used in construction, forestry and earthworks such as bulldozers, excavators and harvesters. They perform evaluations of the equipment, and ensure the safety and optimal efficiency of the machinery.
Aircraft engine tester: Aircraft engine testers test the performance of all engines used for aircraft in specialised facilities such as laboratories.They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Motor vehicle engine tester: Motor vehicle engine testers test the performance of diesel, petrol, gas and electric engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Material stress analyst: Material stress analysts plan and use software to perform structural analyses including static, stability and fatigue analyses on a variety of machines. They develop analysis of primary and secondary structures. They prepare technical reports to document their analysis results, participate in design reviews and recommend process improvements. They also assist in the development of structural test plans.
Veneer grader: Veneer graders inspect slices of veneer for quality. They look for irregularities, blemishes and production errors, and grade the slices for the desirability of the patterns.
Automation engineer: Automation engineers research, design, and develop applications and systems for the automation of the production process. They implement technology and reduce, whenever applicable, human input to reach the full potential of industrial robotics. Automation engineers oversee the process and ensure all systems run safely and smoothly.
Industrial engineering technician: Industrial engineering technicians assist industrial engineers in improving efficiency, safety and productivity in manufacturing plants. They conduct production studies, prepare layouts for machinery and equipment and suggest solutions to remedy quality problems.
Geologist: Geologists research the materials that form the earth. Their observations depend on the purpose of the research. Depending on their specialisation, geologists study how the Earth has been shaped over time, its geological layers, the quality of minerals for mining purposes, earthquakes and volcanic activity for private services, and similar phenomena.
Optomechanical engineering technician: Optomechanical engineering technicians collaborate with engineers in the development of optomechanical devices, such as optical tables, deformable mirrors, and optical mounts. Optomechanical engineering technicians build, install, test, and maintain optomechanical equipment prototypes. They determine materials and assembly requirements.
Chemical manufacturing quality technician: Chemical manufacturing quality technicians perform inspections and precision measurements in order to test and ensure the quality of products, by using computer controlled machinery and systems.
Optoelectronic engineering technician: Optoelectronic engineering technicians collaborate with engineers in the development of optoelectronic systems and components, such as photodiodes, optical sensors, lasers and LED’s. Optoelectronic engineering technicians build, test, install and calibrate optoelectronic equipment. They read blueprint and other technical drawings to develop testing and calibrating procedures.
Vessel engine tester: Vessel engine testers test the performance of vessel engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, dual fuel engines and, in some cases, marine steam engines in specialised facilities such as laboratories. They position or give directions to workers positioning engines on the test stand. They use hand tools and machinery to position and connect the engine to the test stand. They use computerised equipment to enter, read and record test data such as temperature, speed, fuel consumption, oil and exhaust pressure.
Material testing technician: Material testing technicians perform a variety of tests on materials such as soils, concrete, masonry and asphalt, in order to verify conformance to intended usage cases and specifications.
Mechatronics engineering technician: Mechatronics engineering technicians collaborate with engineers in the development of mechatronic devices and applications through a combination of mechanical engineering, electronic engineering, and computer engineering. They build, test, install, and calibrate mechatronics and solve technical problems.
Agricultural machinery technician: Agricultural equipment technicians repair, overhaul and maintain agricultural equipment including tractors, tillage equipment, seeding equipment and harvesting equipment. They perform evaluations of the equipment, perform preventive maintenance activities and repair faults.
Welding inspector: Welding inspectors examine the connections and bonds between metals. They utilise visual tools and electrical instruments to inspect and ensure the quality and safety of connections. Welding inspectors ensure that all related welding activities, plans and materials follow the appropriate guidelines, in accordance with safety regulations. In addition to working in the field completing their examinations of welding projects, inspectors spend time in an office setting compiling their reports.
Lift engineer: Lift engineers set lifts into a prepared framed hoistway. They install support assembly, set up the lift pump or motor, piston or cable, and mechanism. Lift engineers connect the necessary electronic elements to complete the installation and connection of the lift cabin. They also perform the necessary steps to inspect and repair lifts, as well as the shaft and any associated electronics. Lift engineers make sure every inspection and report action is noted in a log book, and report to the client on the state of the serviced lift.
Geology technician: Geology technicians assist in all the activities carried out by geologists. They, under the supervision of geologists, collect materials, carry out research and study the samples collected from the Earth in order to offer analysis as part of the project and the aim. Geology technicians assist in determining the value of the land for oil or gas exploration. They perform various technical tasks, including collecting samples during geochemical surveys, working on drill sites, and participating in geophysical surveys and geological studies.
Calculation engineer: Calculation engineers draw conclusions about real systems, such as on strength, stability and durability, by performing experiments on virtual models. They test production processes as well.

Optional skill

Record test data is optional for these occupations. This means knowing this skill may be an asset for career advancement if you are in one of these occupations.

Gear machinist: Gear machinists make precision parts for gears and other driving elements. They use a variety of machine tools.
Aircraft engine assembler: Aircraft engine assemblers build and install prefabricated parts to form aircraft engines such as lightweight piston engines and gas turbines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Marine engineering technician: Marine engineering technicians carry out technical functions to help marine engineers with the design, development, manufacturing and testing processes, installation and maintenance of all types of boats from pleasure crafts to naval vessels, including submarines. They also conduct experiments, collect and analyse data and report their findings.
Aerospace engineering technician: Aerospace engineering technicians work with aerospace engineers to operate, maintain and test equipment used on aircraft and spacecraft. They review blueprints and instructions to determine test specifications and procedures. They use software to make sure that parts of a spacecraft or aircraft are functioning properly. They record test procedures and results, and make recommendations for changes.
Rolling stock engineering technician: Rolling stock engineering technicians carry out technical functions to help rolling stock engineers with the design, development, manufacturing and testing processes, installation and maintenance of rail vehicles such as wagons, multiple units, carriages and locomotives. They also conduct experiments, collect and analyse data and report their findings.
Pharmaceutical quality specialist: Pharmaceutical quality specialists perform inspections and precision measurements in order to test and ensure the quality of pharmaceutical products. They are involved in the whole development phase of a pharmaceutical product until it is ready for the market. This includes the process of acquiring clinical trial licences, advising the pharmaceutical development staff on regulatory requirements and evaluating the content of the package leaflet and other documentation on the product. Moreover, pharmaceutical quality specialists collect and evaluate information on side effects of the product and communicate this knowledge both internally and to the relevant authorities.
Welding engineer: Welding engineers research and develop optimal effective welding techniques and design the corresponding, equally efficient equipment to aid in the welding process. They also conduct quality control and evaluate inspection procedures for welding activities. Welding engineers have advanced knowledge and critical understanding of welding technology application. They are able to manage high complex technical and professional activities or projects related to welding applications, while also taking responsibility for the decision making process.
Equipment engineer: Equipment engineers design and maintain the machinery and equipment in manufacturing facilities. They design machinery that adjusts to the manufacturing requirements and processes. Moreover, they envision the maintenance of the machines and equipment for uninterrupted functioning.

Component engineer: Component engineers design and envision the engineering development of different small parts composing a bigger project, machine, or process. They ensure that parts are not conflicting from an engineering perspective.
Heating, ventilation, air conditioning engineer: Heating, ventilation, air conditioning engineers design and develop heating, ventilation, air conditioning and possibly refrigeration systems for usage in residences, manufacturing sites, offices, commercial buildings, etc. They strive for solutions that serve the needs of clients and respond to architectural restrictions of sites.
Lacquer maker: Lacquer makers operate and maintain laquers and syntetic paints mixers and jar mills, making sure the end product is according to formula.
Rotating equipment mechanic: Rotating equipment mechanics are responsible for preventive and corrective maintenance activities for rotating equipment such as turbines, compressors, engines, and pumps. They ensure the availability and integrity of the installed systems and equipment in terms of safety and reliability.
Satellite engineer: Satellite engineers develop, test and oversee the manufacture of satellite systems and satellite programmes. They may also develop software programs, collect and research data, and test the satellite systems. Satellite engineers can also develop systems to command and control satellites. They monitor satellites for issues and report on the behaviour of the satellite in orbit.
Industrial machinery mechanic: Industrial machinery mechanics work on new machinery and equipment in operation. They set up for the specific application and build accessories if necessary, perform maintenance and repair, and run diagnostics to find faults in systems or parts that need replacing.
Asphalt plant operator: Asphalt plant operators extract raw materials such as sand and stones and operate mobile equipment for their transport to the plant. They tend automated machines to crush and sort out stones, and to mix the sand and stones with asphalt cement. They take samples to check the quality of the mix and arrange for its transport to the construction site.
Utilities inspector: Utilities inspectors examine products, systems and machiney such as sewer, water, gas or electric turbines ensuring they are built and functioning according to regulations. They write inspection reports and provide recommendations to improve the systems and repair the broken components.

Product development engineering technician: Product development engineering technicians improve efficiency of product development, set up equipment and develop and test solutions to solve technical problems. They work closely with engineers and technologists, inspect products, conduct tests and collect data.
Automotive engineering technician: Automotive engineering technicians work with automotive engineers to operate, repair, maintain and test equipment used in motor vehicles. In some environments, such as an airport they are responsible for keeping equipment and vehicles serviceable. They review blueprints and designs to determine test specifications and procedures. Automotive engineering technicians use software to make sure that parts of a motor vehicle are functioning properly. They record test procedures and results, and make recommendations for changes.
Fire prevention and protection engineer: Fire prevention and protection engineers study, design, and developed innovative solutions aimed to the prevention of fire and the protection of people, natural sites, and urban areas. They propose suitable materials for construction, clothing, or other applications and they design detection systems aiming to prevent fire or the propagation of it.

Agricultural engineer: Agricultural engineers intervene in a variety of matters within the agriculture field in combination with engineering concepts. They design and develop machinery and equipment for an efficient and sustainable exploitation of the land. They advise on the use of resources in agricultural sites comprising the usage of water and soil, harvesting methods, and waste management.
Industrial robot controller: Industrial robot controllers operate and monitor industrial robots used in automation processes to perform various manufacturing activities such as lifting, welding and assembling. They ensure that the machines are working correctly and in sync with other industrial robots, maintain and repair defective parts, assess risks and perform tests.
Industrial engineer: Industrial engineers design a vast array of production systems aiming to present efficient and effective solutions. They integrate a varied number of variables such as workers, technology, ergonomics, production flows, and product specifications for the design and implementation of production systems. They can specify and design for microsystems as well.
Robotics engineer: Robotics engineers design and develop robotic devices and applications in combination with mechanical engineering principles. They use pre-established designs and current developments for improving or inventing systems, machinery and equipment. They combine several knowledge fields such as computing, engineering, and electronics in the development of new engineering applications.
Analytical chemist: Analytical chemists research and describe the chemical composition of substances. Moreover, they draw conclusions related to the behaviour of such substances in different conditions.
Mechanical engineer: Mechanical engineers research, plan and design mechanical products and systems and supervise the fabrication, operation, application, installation and repair of systems and products. They research and analyse data.
Naval architect: Naval architects design, build, maintain and repair all types of boats from pleasure crafts to naval vessels, including submarines. They analyse floating structures and take various features into account for their designs such as the form, structure, stability, resistance, access and propulsion of hulls.
University research assistant: University research assistants conduct academic research for the university or college they are employed in. They may assist professors they are affiliated with, their supervisor, in their research or develop their own in the related field of that professor.
Flight test engineer: Flight test engineers work with other systems engineers to plan the tests in detail and to make sure that the recording systems are installed for the required data parameters. They analyse the data collected during test flights and produce reports for individual test phases and for the final flight test. They are also responsible for the safety of the test operations.
Maintenance and repair engineer: Maintenance and repair engineers focus on the optimization of equipment, procedures, machineries and infrastructure. They ensure their maximum availability at minimum costs.
Product quality inspector: Product quality inspectors check products in order to assess their compliance in reference to a standard or reference guideline. They observe, measure, test, and form questions in order to fill in forms and present levels of compliance with comments after the inspection process. Product quality inspectors are employed or work externally for companies.
Synthetic materials engineer: Synthetic materials engineers develop new synthetic materials processes or improve existing ones. They design and construct installations and machines for the production of synthetic materials and examine samples of raw materials in order to ensure quality.
Design engineer: Design engineers develop new conceptual and detailed designs. They create the look for these concepts or products and the systems used to make them. Design engineers work with engineers and marketers to enhance the functioning and efficiency of existing devices.
Wood fuel pelletiser: Wood fuel pelletisers operate a hammer mill to turn wood waste products into pellets for use as fuel. The milled product is afterward pressed through a die, producing the standardised shape and size of a pellet.
Product assembly inspector: Product assembly inspectors evaluate products for compliance with specifications and defects in-line with clients’ requirements and organisational policies. They use measuring and testing equipment to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They also provide detailed inspection documentation and recommend action where problems are discovered.
Motor vehicle parts assembler: Motor vehicle parts assemblers fasten motor vehicle parts and components together. They use hand and tools power tools to connect wiring and cables, position and adjust parts. Motor vehicle parts assemblers also set up programmable devices or robots. They test electrical assemblies and equipment and inspect individual parts for malfunctions. They check the quality of assemblies to make sure the standards are met and the specifications are complied with.
Rolling stock engineer: Rolling stock engineers design and oversee the manufacturing process and installation of rail vehicles, including locomotives, carriages, wagons and multiple units. They design new trains and electrical or mechanical parts, supervise modifications and resolve technical problems. They also perform routine maintenance duties to ensure that trains are in good condition and meet quality and safety standards.
Aircraft gas turbine engine overhaul technician: Aircraft gas turbine engine overhaul technicians perform overhaul, maintenance and repair work on gas turbine engines. They disassemble, inspect, clean, repair and reassemble the engines using engine-specific tooling.
Assayer: Assayers test and analyse precious metals such as silver and gold to determine the value and properties of components using chemical and physical techniques. They also seperate precious metals or other components from other materials.
Palaeontologist: Palaeontologists research and analyse forms of life that existed in ancient eras of the planet Earth. They strive to define the evolutionary path and the interaction with different geological areas of all kinds of once organisms and such plants, pollen and spores, invertebrate and vertebrate animals, humans, traces such as footprints, and ecology and climate.
Rolling stock assembler: Rolling stock assemblers use hand tools, power tools and other equipment such as lifting equipment or robots to construct, fit and install prefabricated parts to manufacture rolling stock subassemblies and body structures. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Rolling stock engine inspector: Rolling stock engine inspectors inspect diesel and electric engines used for locomotives to ensure compliance with standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centers. They review administrative records, analyse the operating performance of engines and report their findings.
Electrical engineer: Electrical engineers design and develop electrical systems, electrical equipment, components, motors, and equipment with the feature of energy transmission. They engage in large scale projects such as the design and maintenance of power stations, and the distribution of power to smaller applications such as household appliances.
Concrete products machine operator: Concrete products machine operators tend machines used to produce moulded concrete products. They perform greasing, assembling and stripping of moulds. They also participate in the cement mixing process.
Vessel engine assembler: Vessel engine assemblers build and install prefabricated parts to form engines used for all types of vessels such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines and, in some cases, marine steam engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Motor vehicle engine inspector: Motor vehicle engine inspectors inspect diesel, gas, petrol and electric engines used for cars, buses, trucks etc. in assembly facilities such as factories and mechanic shops to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Automotive engineer: Automotive engineers design and oversee the manufacturing process and operation of motor vehicles such as motorcycles, cars, trucks, buses and their respective engineering systems. They design new vehicles or mechanical parts, supervise modifications and resolve technical problems. They make sure the designs comply with cost specifications and other constraints. They also conduct research studying environmental, energy and safety aspects.
Nanoengineer: Nanoengineers combine the scientific knowledge of atomic and molecular particles with engineering principles for applications in a varied array of fields. They apply findings in chemistry, biology, and materials engineering, etc. They use technological knowledge for the improvement of existing applications or the creation of micro objects.
Precision engineer: Precision engineers design processes, machines, fixtures and other equipment that have exceptionally low engineering tolerances, are repeatable and stable over time. They ensure prototypes are built and tested and make sure the designs meet system specifications and operational requirements.
Motor vehicle assembly inspector: Motor vehicle assembly inspectors use measuring and testing equipment to inspect and monitor motor vehicle assemblies to ensure conformity to engineering and manufacturing specifications, quality, and safety standards and regulations. They detect malfunction and damage and inspect repair work. They also provide detailed inspection documentation and recommend action where problems are discovered.
Industrial waste inspector: Industrial waste inspectors conduct controls in companies to ensure they comply with waste and environmental regulations. They check the documentation related to waste management, they collect samples for analysis and observe the industrial practices. They may advise or preventive or corrective actions to improve industrial waste management and disposal.
Aircraft assembler: Aircraft assemblers use hand tools, power tools and other equipment such as CNC machines or robots to construct, fit and install prefabricated parts to manufacture fixed or rotary wing aircrafts and aircraft subassemblies such as flight controls, aircraft skins, rigging and other mechanical systems etc. They read and interpret blueprints. They operate control systems to determine functional performance of the assemblies and adjust accordingly.
Product quality controller: Product quality controllers check the quality of manufactured products. They work in manufacturing facilities where they perform basic inspection and evaluation of products before, during or after the production process. They track production problems and send inferior or malfunctioning items back for repair.
Rubber products machine operator: Rubber products machine operators operate machines which knead, blend, calender, mould, extrude and cure rubber products from natural and synthetic rubber. They measure the ingredients for mixing and load them into the machine. Rubber products machine operators monitor and control the tempature, pressure and speed during production.
Mechanical engineering technician: Mechanical engineering technicians provide technical support to mechanical engineers in producing and manufacturing mechanical machinery. They help make designs and adjustments, and perform tests. They also develop layouts and drawings, collate and interpret data and write reports.
Immunologist: Immunologists research the immune system of living organisms (e.g. human body) and the way it reacts to external infections or invasive harmful agents (e.g. virus, bacteria, parasites). They focus their study on those diseases that affect the immunology of living organisms in order to classify them for treatment.
Process engineer: Process engineers apply engineering concepts in order to improve all kinds of production and manufacturing processes in terms of efficiency and productivity. They evaluate the variables and constraints present in given processes and present engineering solutions to optimise them.
Pulp technician: Pulp technicians perform technical tasks in the production of pulp. They work in pulp production teams where they maintain machines, resolve technical malfunctions and ensure the production process runs according to specifications.
Industrial machinery assembler: Industrial machinery assemblers manufacture industrial equipment such as industrial robots, assembly line machines, and labeling machines. They use hand tools and computer-controlled machines.
Metal product quality control inspector: Metal product quality control inspectors perform preventive and operational quality control on the metal products. They examine the materials at various stages to make sure it conforms to the desired standard, test the products, and send them back for repair if necessary.
Engineered wood board machine operator: Engineered wood board machine operators work with machines to bond particles or fibres made from wood or cork. Various industrial glues or resins are applied to obtain fibre board, particle board or cork board.
Assistant lecturer: Assistant lecturers share university or college lecturers’ academic workload, specifically the provision of lectures to students. They prepare and teach classes, and meet with students privately regarding evaluation. They also combine their lecturing and other academic duties with conducting their own research in their field of study. Assistant lecturers occupy an autonomous, full-time position, despite what the subservience element in the occupation title may suggest.
Marine engineer: Marine engineers design, build, maintain and repair the hull, mechanical, electronic equipment and auxiliary systems such as engines, pumps, heating, ventilation, generator sets. They work on all types of boats from pleasure crafts to naval vessels, including submarines.
Motor vehicle engine assembler: Motor vehicle engine assemblers build and install prefabricated parts to form motor vehicle engines such as diesel, gas, petrol and electric engines. They review specifications and technical drawings to determine materials and assembly instructions. They inspect and test the engines and reject malfunctioning components.
Operations manager: Operations managers plan, oversee and coordinate the daily operations of production of goods and provision of services. They also formulate and implement company policies and plan the use of human resources and materials.
Varnish maker: Varnish makers operate equipment and mixers for varnish production, by melting, mixing and cooking the required chemical ingredients, according to specifications.
Precision mechanic: Precision mechanics manufacture precision metal components for machines and assemble them into functional units. They also build electronic measuring and control components. Precision mechanics use milling, drilling, grinding and honing machines.
Civil engineer: Civil engineers design, plan, and develop technical and engineering specifications for infrastructure and construction projects. They apply engineering knowledge in a vast array of projects, from the construction of infrastructure for transportation, housing projects, and luxury buildings, to the construction of natural sites. They design plans that seek to optimise materials and integrate specifications and resource allocation within the time constraints.
Aerospace engineer: Aerospace engineers develop, test and oversee the manufacture of flight vehicles such as aircrafts, missiles, and spacecrafts. The field of engineering they are active in, can be divided into two branches: aeronautical engineering and astronautical engineering.
Vessel engine inspector: Vessel engine inspectors inspect ship and boat engines such as electric motors, nuclear reactors, gas turbine engines, outboard motors, two-stroke or four-stroke diesel engines, LNG, fuel dual engines and, in some cases, marine steam engines in assembly facilities to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Surface engineer: Surface engineers research and develop technologies for manufacturing processes that assist in altering the properties of the surface of bulk material, such as metal, in order to reduce degradation by corrosion or wear. They explore and design how to protect surfaces of (metal) workpieces and products utilising sustainable materials and testing with a minimum of waste.
Instrumentation engineer: Instrumentation engineers envision and design equipment used in manufacturing processes for controlling and monitoring various engineering processes remotely. They design equipment for the monitoring of production sites such as manufacturing systems, machinery uses and production processes.
Chemical engineer: Chemical engineers design and develop large-scale chemical and physical production processes and are involved in the entire industrial process required for transforming raw materials into products.
Aircraft engine inspector: Aircraft engine inspectors inspect all types of engines used for aircrafts in factories to ensure compliance with safety standards and regulations. They conduct routine, post-overhaul, pre-availability and post-casualty inspections. They provide documentation for repair activities and technical support to maintenance and repair centres. They review administrative records, analyse the operating performance of engines and report their findings.
Industrial quality manager: Industrial quality managers monitor and control information assets by detailing processes and procedures to ensure compliance with industrial standards. They perform audits in industrial processes, advise on preventive and corrective actions, and ensure compliance with industrial standards.
Application engineer: Application engineers deal with the technical requirements, management, and design for the development of various engineering applications, such as systems, new product designs, or the improvements of processes. They are responsible for the implementation of a design or process improvement, they offer technical support for products, answer questions about the technical functionality and assist the sales team.
Motor vehicle assembler: Motor vehicle assemblers install and put prefabricated motor vehicle parts and components together. They inspect the motor vehicles for defects, and test the assembled equipment for proper performance and conformity to quality standards.

 


 

References

  1. Record test data – ESCO

 

Last updated on September 20, 2022